Patriot Ordnance Factory (POF) Strike Eagle Charging Handle — AR-10, Black Hardcoat Anodized, 7075 Billet Aluminum (Model 01543 / UPC 847313015433)
Elevate your AR-10 platform with the Patriot Ordnance Factory Strike Eagle Charging Handle (Model 01543) — a precision-machined, ambidextrous charging handle engineered for strength, speed, and repeatable function. CNC machined from premium 7075 T6 billet aluminum and finished in rugged black hardcoat anodize, the Strike Eagle delivers a positive, ergonomic interface for both right- and left-handed shooters. Built to endure heavy training, duty use, and high round counts, this AR-10 charging handle is an immediate, no-compromise upgrade for modern long-range and tactical builds.
Product Highlights — Fast facts
Model: Strike Eagle Charging Handle (AR-10)
Part Number: 01543
UPC: 847313015433
Platform: AR-10 / .308-class rifles (standard AR-10 charging handle cut)
Material: 7075 T6 billet aluminum (CNC machined)
Finish: Black hardcoat anodized (durable, corrosion-resistant)
Design: Ambidextrous dual-lever charging handle with oversized paddles for rapid manipulation
Fit: Drop-in replacement for uppers with standard AR-10 charging handle interface
Why the Strike Eagle for AR-10 Builds?
The Strike Eagle was developed to give shooters more than a cosmetic upgrade — it provides practical, measurable performance improvements:
Ambidextrous Control: Oversized left and right paddles allow you to charge, clear malfunctions, or manipulate the bolt from either side without breaking your firing grip or moving your support hand.
7075 Billet Strength: 7075 aluminum offers exceptional strength-to-weight ratio, resisting bending, cracking, and deformation that can plague cast or stamped alternatives under heavy use.
Positive Ergonomics: Aggressive but ergonomic paddle geometry delivers secure purchase in wet conditions and when wearing gloves, improving speed and control during emergency manipulations.
Rugged Finish: Hardcoat anodize (Type III equivalent) increases surface hardness and corrosion resistance for dependable service in harsh environments.
Precision Fit: Tight machining tolerances reduce slop and wobble for consistent feel and operation with minimal break-in.
Key Features & Benefits
Dual-Side Levers: Identical operation left or right — faster tap-and-rack and one-handed manipulations.
Large Contact Surface: Textured paddles reduce slippage and allow controlled, assertive inputs under stress.
Low-Profile Profile: Designed to minimize interference with optics and rails while still providing an ample control surface.
Lightweight: Billet design keeps mass low so you don’t compromise rifle balance.
Durable Construction: Ideal for duty, competitive, and heavy-use range environments.
Direct Drop-In: Easy installation — installs like an OEM charging handle with standard AR-10 uppers.
Performance & Handling
On AR-10 platforms the charging handle is the primary human interface for clearing jams, charging the action, and performing immediate action drills. The Strike Eagle’s larger paddles and positive geometry let you execute these tasks quicker and with greater confidence. Left-hand shooters and two-hand manipulation drills benefit greatly from identical leverage on both sides, eliminating the need to reposition the rifle for routine manipulations.
Compatibility & Fitment Notes
Intended For: Standard AR-10 pattern uppers with conventional charging handle grooves. Confirm your upper uses the standard AR-10 charging handle interface prior to purchase.
Clearance Check: Verify clearance with low-profile optics, rail systems, and rear sight towers — oversized paddles can require minimal additional space in some custom rail/optic combinations.
Bolt Carrier Compatibility: Works with standard AR-10 bolt carrier groups. If you run non-standard or proprietary bolt systems, confirm compatibility first.
Not Universal: AR-15 charging handles and AR-10 charging handles differ; ensure you order the AR-10 version (Model 01543) for .308/.30-class systems.
Installation (High-Level Guide)
Safety reminder: Always work on an unloaded firearm with the magazine removed and the action clear before disassembly or installation.
Remove the bolt carrier group (BCG) and ensure the upper is empty.
Slide out the factory charging handle, noting correct orientation.
Insert the Strike Eagle charging handle the same way, aligning the rails and nose into the upper receiver groove.
Reinstall the BCG and cycle the action to ensure smooth, full travel.
Perform a dry-function check and verify no interference with optics or handguard.
If unsure about fitment or function, have a qualified armorer or gunsmith perform the installation.
Care & Maintenance
Routine Cleaning: Wipe carbon and debris from rail surfaces and paddles during routine maintenance.
Light Lubrication: Apply a thin film of lubricant to contact surfaces to ensure smooth travel and reduce wear.
Inspect Periodically: Check for burrs, cracks, or abnormal wear and replace if any structural compromise is observed.
Finish Care: Hardcoat anodize resists corrosion; clean with a soft cloth and mild solvent as needed.
Frequently Asked Questions (FAQ)
Q: Will this handle fit my AR-10 with a specific rail or optic?
A: The Strike Eagle fits standard AR-10 upper rails; however, some ultra-low optics or custom rails may require clearance checks. Measure or mock-fit before final installation if using low-profile red dots or rail-mounted rear accessories.
Q: Is the Strike Eagle compatible with suppressed or SBR builds?
A: Yes — the charging handle is compatible with short-barreled rifles and suppressed setups provided the upper uses a standard charging handle cut. Ensure BCG velocity and gas system are configured appropriately for your build.
Q: How durable is 7075 billet aluminum compared to other materials?
A: 7075 T6 billet aluminum offers one of the best strength-to-weight ratios available in aircraft-grade alloys and resists deformation under heavy use much better than cast or stamped alternatives.
Who Should Choose the POF Strike Eagle (AR-10)?
Long-range marksmen and DMR builders who want reliable charging ergonomics on .308-class platforms.
Tactical operators and duty users needing ambidextrous controls for fast malfunction clearance.
Left-handed shooters who require symmetric charging access without compromise.
Competition shooters & heavy trainers who run high round counts and demand durable parts.
Custom builders & enthusiasts upgrading to premium billet furniture and controls.
SEO-Friendly Summary (Keywords: POF Strike Eagle AR-10 charging handle, ambidextrous AR-10 charging handle, 7075 billet charging handle, hardcoat anodized charging handle, 01543)
The Patriot Ordnance Factory Strike Eagle Charging Handle — AR-10 (Model 01543 / UPC 847313015433) is a 7075 T6 billet aluminum, black hardcoat anodized, ambidextrous charging handle designed specifically for AR-10/.308 platform uppers. With oversized dual levers, precision CNC machining, and a rugged finish, the Strike Eagle improves manipulation speed, ergonomics, and durability for duty rifles, competition builds, and high-use platforms.
Upgrade your AR-10 control ergonomics with a premium ambidextrous charging handle engineered to last — the POF Strike Eagle (01543) brings billet strength, practical ergonomics, and precision fit to every pull of the handle.
The End
