Pietta Cylinder — .44 Cal, 1851/1860 Navy, Black Engraved Steel Replacement Cylinder for Cap-and-Ball Revolvers (Model PAF6012 | UPC 641996730511)

Refresh the heart of your percussion revolver with the Pietta .44 Cal 1851/1860 Navy Black Engraved Steel Cylinder. Precision-machined to factory Pietta specifications, this six-shot cylinder restores tight lockup, smooth rotation, and consistent ignition in .44 caliber Pietta 1851 Navy and Pietta 1860 Army/Navy-pattern revolvers. The deep black finish and classic engraving (period-style scroll/nautical motif) deliver authentic Old West aesthetics while the robust steel construction stands up to regular black-powder shooting.

Why Upgrade to a Pietta OEM Engraved Cylinder

• Factory Fit & Timing: Built to Pietta’s geometry for proper ratchet engagement, bolt notch alignment, and dependable timing on compatible .44 models.

• Black Engraved Steel: Durable, heat-treated steel with a rich black finish and heritage-inspired engraving that complements traditional frames and grips.

• Reliable Ignition: Uniform chambers and correct cone/flash alignment promote consistent cap seating and flame travel for fewer misfires.

• Performance Refresh: Replace a worn or pitted cylinder and experience smoother indexing, firmer lockup, and tighter groups.

• Range & Reenactment Ready: Keep a spare, engraved cylinder (where lawful) to minimize downtime during long range days or events.

Compatibility & Fit Notes

• Platform: Pietta 1851 Navy (.44 cal) and many Pietta 1860 (.44 cal) Navy/Army-pattern percussion revolvers.

• Brand Specific: Intended for Pietta revolvers. Other makers’ replicas can vary in arbor length, hand/bolt fit, and cylinder window dimensions and may require gunsmith fitting.

• Caliber Confirmation: This is a .44 caliber cylinder. (Pietta also produces .36 caliber versions for some 1851/1861 models; verify your revolver’s caliber before ordering.)

• Minor Fitting Possible: Depending on tolerance stacking, light stoning/polishing of the hand (pawl) or bolt may be needed to achieve ideal bolt drop and lockup.

Performance Benefits You’ll Notice

• Cleaner Timing: Proper ratchet geometry helps the bolt drop before the notch and lock securely at full cock.

• Consistency Shot to Shot: Uniform chamber mouths can improve pressure and velocity consistency for better accuracy.

• Smoother Operation: Fresh ratchets and notches reduce drag, enhancing cocking feel and cylinder wear life.

Installation Overview (Summary)

Always work completely unloaded and uncapped. Wear eye protection. Follow your owner’s manual.

1. Verify Clear: Ensure the revolver is unloaded and uncapped.

2. Half-Cock: Set hammer to half-cock so the cylinder rotates freely.

3. Disassemble: Remove the wedge and barrel assembly; slide the old cylinder off the arbor.

4. Prep & Lube: Lightly lube the arbor; check hand/bolt faces for burrs.

5. Install New Cylinder: Slide on the new engraved cylinder; reinstall barrel and wedge.

6. Function Check: Slowly cycle through all notches—confirm timing, bolt drop, and positive lockup before live fire.

Pro Tip: Mark each cylinder and keep notes on powder charge, ball diameter, and cap brand/size. Consistent components = consistent results.

Black-Powder Care Essentials

• Clean Same Day: Black-powder residue is corrosive. Clean chambers, nipples, and threads with warm, soapy water or BP solvent; dry fully and oil lightly.

• Nipple Condition: Replace peened or eroded nipples and use snug #10/#11 caps per your pistol’s spec to minimize misfires and cap fragments.

• Storage: Lightly oil exterior surfaces and store uncapped in a dry environment.

Safety & Legal

• Know Your Laws: Rules for black-powder firearms and components vary by jurisdiction. Verify local/state/federal regulations.

• Proof Before Use: Range-test with safe, published loads to confirm reliable ignition and proper timing after installation.

• Use Correct Components: Match ball diameter (.451–.454" typical), wad/lube practice, and cap size to your revolver and cylinder.

Specifications

• Manufacturer: Pietta

• Product: .44 Cal 1851/1860 Navy Engraved Cylinder

• Material/Finish: Engraved black steel

• Caliber: .44 caliber (cap-and-ball)

• Capacity: 6 chambers

• Compatibility: Pietta 1851 Navy .44 and many Pietta 1860 .44-cal Navy/Army-pattern revolvers

• Model #: PAF6012

• UPC: 641996730511

What’s in the Box

• Pietta .44 Cal Black Engraved Steel Cylinder — 6-shot

• Manufacturer documentation (if provided)
  (Nipples may be installed or included separately depending on production; verify package contents.)

Who It’s For

• Black-powder enthusiasts seeking a performance refresh and period-correct look

• Reenactors & collectors wanting a display-worthy engraved cylinder that also runs reliably

• Range shooters & hobby gunsmiths restoring timing and lockup on well-loved Pietta revolvers

SEO-Friendly Keywords (Use Naturally on Your Product Page)

Pietta .44 cylinder engraved, PAF6012, 1851 Navy 1860 Navy cylinder black steel, cap and ball revolver replacement cylinder, Pietta percussion revolver .44 cylinder, engraved black powder cylinder, UPC 641996730511.

Restore reliability and add frontier style with the Pietta .44 Cal 1851/1860 Navy Black Engraved Cylinder (PAF6012)—factory geometry, classic engraving, and smooth performance for your favorite cap-and-ball revolver.

The End