PULL THROUGH CHAMBER REAMERS 184300306

Achieve match-grade accuracy and precise minimum headspace in your .30-06 rifles with the Clymer Pull Through Chamber Reamer Complete Set – PULL THROUGH CHAMBER REAMERS 184300306 (.30-06 Springfield). This professional-grade kit is the same style of pull-through chamber reamer system long used by military armorers to tune match rifles for superior performance, now available for serious gunsmiths and precision shooters. Primary Tactical+2Brownells UK+2

Create Super-Accurate Minimum Headspace Chambers

The Clymer .30-06 Pull Through Chamber Reamer Set (184300306) is engineered specifically to produce minimum-length, tight-headspace chambers in .30-06 Springfield rifles. That means:

• Enhanced accuracy potential in match and precision hunting rifles

• More consistent ignition and brass support

• Reduced chance of case stretching and premature brass failure

By tightening up headspace to the lower end of spec, this pull-through system helps give your rifle the same kind of accuracy advantage match shooters have relied on for decades. Brownells UK+1

How the Pull-Through System Works

Unlike a standard chamber reamer used from the breech, this Clymer tool is designed to work as a pull-through reamer from the muzzle end: Brownells UK+2Brownells Finland+2

1. The reamer is attached to the 24" extension shaft and guided into the bore from the muzzle.

2. The rifle’s own bolt applies pressure to the reamer from the rear.

3. As you turn the shaft from the muzzle end, the reamer gradually cuts the chamber.

4. When the bolt finally “drops” and closes freely, the chamber has reached the desired minimum headspace.

This method uses the rifle’s bolt as a live gauge, ensuring the chamber is cut exactly to the rifle’s headspace relationship, not just theoretical dimensions.

Finish Reamer Only – For Final, Precision Cuts

Clymer specifies that these Pull Through Chamber Reamers are to be used as FINISH REAMERS ONLY: Brownells UK+2Brownells Finland+2

• First, rough and finish the chamber with a conventional finish reamer to standard dimension.

• Then, use the .30-06 Pull Through Reamer to carefully bring the chamber down to minimum headspace.

This two-step approach:

• Minimizes wear on your P/T reamer

• Gives finer control over final headspace

• Ensures a smooth, SAAMI-spec final surface in the shoulder, neck, and throat

Improved Design – Cuts Shoulder, Neck & Throat

This updated design from Clymer doesn’t just “kiss” the shoulder; it is engineered to cut the shoulder, neck, and throat in one continuous, controlled operation. Brownells UK+2Brownells Finland+2

Benefits include:

• More uniform neck and throat geometry

• Reduced risk of neck crimping or excessive bullet constriction

• Better bullet alignment into the rifling for improved accuracy

For match shooters and custom rifle builders, that means more consistent chamber-to-bore transition and more predictable performance shot to shot.

Complete .30-06 P/T Reamer Set – What’s Included

The 184300306 “complete set” comes with everything you need to perform pull-through chamber finishing on .30-06 rifles: Brownells UK+2Brownells Finland+2

• Pull Through (.30-06) Chamber Reamer

• Thrust Bushing – supports the rear of the reamer and interfaces with the bolt

• Extension Shaft

  • Length: 24" (60 cm)

  • Diameter: 1/4" (6.3 mm)

  • Round shank

Clymer recommends using the Throater/.22 T-Handle (#184-054-653) to drive the shaft, giving you controlled rotation from the muzzle end. Brownells Finland+1

Works on Bolt-Action & Semi-Auto .30-06 Rifles

These Pull Through Chamber Reamers are not limited to a single platform:

• Designed to work on bolt-action match rifles

• Compatible with semi-auto rifles in .30-06 that allow access for pull-through operation Brownells Finland+1

Whether you’re tuning a precision bolt gun or tightening up the headspace on a service-style rifle, this tool is built for real-world .30 caliber applications.

Superb Clymer Quality – Made to SAAMI Specifications

Like the rest of Clymer’s chambering tools, the PULL THROUGH CHAMBER REAMERS 184300306 are:

• Manufactured from premium high-speed steel (M-7 class) for excellent wear resistance Primary Tactical+1

• Ground to SAAMI-specification dimensions for .30-06 Springfield Brownells UK+2Brownells+2

• Built to provide long service life in professional gunsmithing shops

The result is a tool that cuts cleanly, tracks true, and consistently produces match-grade chambers when used correctly.

Key Specs – PULL THROUGH CHAMBER REAMERS 184300306

From Clymer and major distributors: ammomart.com+3Brownells UK+3Brownells Finland+3

• Product Name: Clymer Pull Through Chamber Reamer Set – .30-06

• SKU: 184300306

• Manufacturer: Clymer

• Caliber / Cartridge: .30-06 Springfield

• Style: Pull-Thru Reamer Set (P/T Reamer + Thrust Bushing + Extension Shaft)

• Shaft Length: 24" (60 cm)

• Shaft Diameter: 1/4" (6.3 mm)

• Shank: Round shank on extension; reamer designed for pull-through use

• Standards: Made to SAAMI specifications

• Works With: Bolt-action and semi-auto rifles in .30-06 Springfield

Ideal For Professional Gunsmiths & Serious Builders

The Clymer PULL THROUGH CHAMBER REAMERS 184300306 is perfect for:

• Gunsmiths building or tuning .30-06 match rifles

• Armorers tasked with creating minimum-headspace service rifles

• Precision rifle builders who want the tightest, most consistent .30-06 chambers possible

• Advanced hobbyists looking to bring professional-level tooling into their shop

If you’re serious about extracting every bit of accuracy from a .30-06 chamber, this pull-through reamer set is a proven, time-tested way to do it.

The End