Recover Tactical Compact Rail Adapter for Glock 43/43X/48 — Black (GR4301)

Model: GR4301 • UPC: 7290017108162 • Compatibility: Glock® 43, Glock® 43X, Glock® 48 (slimline, non-railed frames) • Color: Black • Interface: MIL-STD-1913/Picatinny • Install: No-gunsmithing, non-permanent

Give your slimline Glock the modern capability it deserves. The Recover Tactical Compact Rail Adapter (GR4301) adds a true Picatinny/1913 accessory rail to Glock 43, 43X, and 48 pistols that shipped without one—so you can mount a compact weapon light or laser for better target identification and control in low light. Built from glass-reinforced polymer to match the Glock slimline profile, the GR4301 installs in minutes with basic tools and no permanent modifications to your frame.

Why Choose the GR4301 for Your Slimline Glock

• Instant Rail, No Milling: Securely adds a Picatinny slot—no frame cuts, epoxy, or gunsmithing required.

• Slimline-Specific Fit: Engineered around the unique dust-cover and trigger-guard geometry of G43/G43X/G48 for tight, repeatable alignment.

• Light & Laser Ready: Works with many compact and micro rail-mount lights/lasers designed for short Picatinny sections.*

• Snag-Resistant Profile: Low-profile, rounded edges minimize printing and help maintain a clean draw from concealment.

• Reinforced Polymer Strength: Rugged, impact-resistant construction stands up to recoil, daily carry, and range use.

• Affordable Modernization: Add capability to a beloved slimline carry gun without buying a new pistol.

*Always verify your chosen accessory’s clamp depth and switch reach on slimline frames (e.g., micro/“sub” lights). Some trigger-guard-specific lights may not use Picatinny rails.

Key Features at a Glance

• Fitment: Glock 43, 43X, 48 (factory, non-railed frames)

• Interface: MIL-STD-1913/Picatinny accessory slot

• Material: Glass-reinforced polymer (Black)

• Install Time: Typically 3–10 minutes, non-permanent clamp around trigger guard

• Use Cases: Concealed carry, home/EDC, low-light training, agency standardization

• Maintenance: Solvent-resistant surface, simple wipe-down care

Compatibility & Holster Notes

• Designed For: OEM G43/G43X/G48 slimline frames without rails.

• May Not Fit: Frames with aftermarket under-frame mods, some Gen-variant trigger-guard shapes, or pistols already equipped with factory rails.

• Holsters: When adding a light/laser, you’ll typically need a light-bearing holster. Confirm with your holster maker for model-specific fit.

• Accessories: Compact rail lights and micro lasers that clamp to Picatinny generally fit; verify length/height so controls remain accessible on slim frames.

Pro Tip: If you already know the light you’ll run, check its clamp spec and overall length against the G43/43X/48 to ensure switch access and holster compatibility.

Installation Overview (No Gunsmith Required)

1. Unload & Clear: Remove the magazine and verify the chamber is empty.

2. Align Adapter: Seat the GR4301 under the dust cover and around the trigger guard per the included instructions.

3. Secure Hardware: Tighten the included screws evenly and snugly (do not overtighten).

4. Mount Accessory: Slide your light/laser onto the rail and lock according to the accessory manufacturer.

5. Function Check: Confirm unobstructed trigger movement, slide travel, takedown, and holster fit/retention.

A qualified armorer can install and verify fit in minutes if you prefer professional setup.

Real-World Advantages You’ll Notice

• Positive Target ID: A compact weapon-mounted light improves low-light decision-making and sight alignment.

• Consistent Manipulations: Standardized accessory placement across your carry guns helps build repeatable training reps.

• Future-Proof Modularity: Swap to new lights/lasers without altering your pistol’s frame.

Care & Maintenance

• Wipe Clean: Use mild soap/water; avoid aggressive solvents that can degrade polymers.

• Torque Check: Re-verify hardware after the first range session and temperature swings.

• Keep the Rail Clear: Inspect the Picatinny slot for grit to ensure solid accessory lock-up.

Technical Specifications

• Brand: Recover Tactical

• Model: GR4301

• UPC: 7290017108162

• Color: Black

• Material: Glass-reinforced polymer

• Interface: Picatinny/1913 accessory rail

• Fitment: Glock 43, 43X, 48 (non-railed OEM frames)

What’s in the Box

• Recover Tactical GR4301 Rail Adapter (Black)

• Mounting hardware & basic instructions

Safety & Compliance

• Follow the four rules of firearm safety during installation and use.

• Re-verify holster compatibility and retention after mounting accessories.

• Check local restrictions regarding weapon-mounted lights/lasers where applicable.

SEO-Optimized Keywords & Phrases

Recover Tactical GR4301, Glock 43 rail adapter, Glock 43X rail adapter, Glock 48 rail adapter, add rail to Glock 43, slimline Glock Picatinny adapter, no-gunsmith rail for G43 G43X G48, weapon light for Glock 43, micro light Glock 43X, 7290017108162.

Short Meta Description

Recover Tactical GR4301—black Picatinny rail adapter for Glock 43/43X/48. No-gunsmith install, reinforced polymer, and compact light/laser compatibility to modernize your slimline Glock. UPC: 7290017108162.

Buyer’s Quick Checklist

• ✅ Own a non-railed Glock 43, 43X, or 48

• ✅ Want to mount a compact light/laser using a Picatinny rail

• ✅ Prefer a non-permanent, fast installation

• ✅ Will confirm holster fit after adding accessories

Modernize your micro-concealment setup—Recover Tactical GR4301 brings true Picatinny versatility to the G43/G43X/G48 in minutes, with no permanent mods.
The End