Keep your finishing work sharp, precise, and professional with CRATEX Replacement Bullet Points – Point, Ex-Fine, #8 Bullet, 1/16" Arbor, SKU 190025084. These extra-fine rubber-bonded abrasive bullet points are ideal for final polishing, light deburring, and ultra-smooth surface refinement on firearms, tools, molds, and precision metal components. Brownells+2Brownells Sverige+2
Sold as replacement bullet points in the popular #8 bullet profile, they’re designed to mount on a 1/16" arbor, dropping seamlessly into your existing CRATEX point setup for high-control, ultra-fine finishing work. friscoguns.com+2Brownells Sverige+2
What Are REPLACEMENT BULLET POINTS 190025084?
The 190025084 variant is a CRATEX Point, Ex-Fine, #8 Bullet, 1/16" Arbor, part of Brownells’ and CRATEX’s well-known Replacement Bullet Points line: Brownells+2Brownells Sverige+2
The #8 bullet profile gives you a rounded, tapered working end that excels on curves, radii, and tight spaces where flat stones or large wheels just can’t reach.
Extra-Fine Grit for Final Polish & Detail Work
These ex-fine CRATEX bullet points are built for finish work, not heavy stock removal. Think of them as your go-to tool for the last 10% of the job where appearance and smoothness really matter: cratex.com+2Actionis+2
Perfect for:
Final polishing of feed ramps, chambers, and contact surfaces on firearms
Smoothing and refining tool marks on slides, frames, and small parts
Light deburring and edge-softening on precision machined components
Polishing molds, dies, jewelry, and light castings where a high-quality finish is essential cratex.com+2Actionis+2
The extra-fine abrasive combined with the rubber bond gives you a velvety, controlled cut that’s far more forgiving than hard vitrified stones.
Rubber-Bonded Abrasive – Smooth, Cushioned Action
Like all CRATEX points, the 190025084 ex-fine bullet points are made from a rubber-bonded abrasive. This unique construction provides: cratex.com+2ajstools.com+2
Flexible, cushioned cutting action – greatly reduces chatter and gouging
Excellent control over surface pressure and finish
A more forgiving feel when working on delicate edges and critical surfaces
They’re widely used by gunsmiths, jewelers, toolmakers, and precision hobbyists for tasks where both control and finish quality are non-negotiable.
#8 Bullet Shape – Ideal for Curves & Tight Areas
The #8 bullet point profile gives you a versatile geometry suited to a wide range of surfaces:
Rounded tip for inside radii, curves, and recessed areas
Tapered body that can reach into narrow channels and corners
Enough surface area to blend and polish without leaving tracks
This makes the 190025084 an excellent choice for:
Polishing locking lugs, breech faces, and internal slide surfaces
Cleaning up curved transitions on custom parts or frames
Refining contours on small castings, molds, and dies Actionis+2ajstools.com+2
1/16" Arbor – Compatible with Common Mandrels
These Replacement Bullet Points use a 1/16" arbor hole, which is standard for many CRATEX mandrels and popular rotary tools: Brownells+2friscoguns.com+2
Perfect for Dremel-type tools, flex-shaft systems, and other precision rotary tools (when used with appropriate 1/16" mandrels)
Easy to swap—just unscrew a worn point and thread on a new 190025084
Lets you keep a consistent tool setup while changing only the grit or shape as needed
That compatibility makes these points easy to integrate into nearly any bench-top finishing workflow.
Ideal for Gunsmithing & Precision Metal Finishing
Retailers and users describe CRATEX Replacement Bullet Points as “preshaped abrasive wheels for all polishing/grinding needs,” especially popular with gunsmiths. gunauction.com+1
Use the 190025084 ex-fine for:
Final passes after medium or fine CRATEX points (like 190025081 or 190025082)
Tightening up the finish on surfaces that need to both look and function perfectly
Subtle blending where maintaining exact dimensions and edges is critical
If you’re working on high-end firearms, custom parts, triggers, or cosmetic metalwork, these ex-fine points help you achieve that professional, “finished” look.
Safe & Effective Use Guidelines
To get the best life and finish from your CRATEX ex-fine bullet points: Brownells Österreich+2ajstools.com+2
Run at moderate speeds (CRATEX points are typically rated up to about 25,000 RPM, but don’t require max speed to cut well).
Use light pressure—let the abrasive do the work; excessive force can shorten tool life and mar the workpiece.
Keep the point moving smoothly to avoid flat spots and localized heating.
Always wear eye protection and appropriate PPE when using rotary tools.
Follow these practices and each point will deliver consistent, controllable performance throughout its life.
Key Specs – REPLACEMENT BULLET POINTS 190025084
From Brownells, CRATEX distributors, and product listings: Brownells France+4Brownells+4friscoguns.com+4
Product Name: Replacement Bullet Points – Point, Ex-Fine, #8 Bullet, 1/16" Arbor
Manufacturer: CRATEX
SKU / Part Number: 190025084
Shape: #8 bullet
Grit: Extra-Fine (Ex-Fine)
Arbor Hole: 1/16"
Type: Rubber-bonded abrasive bullet point
Category: Preshaped abrasive wheels for polishing, grinding, and deburring
(Pack quantities can vary by retailer; many list these as replacement bullet points sold in bulk/sets—check your vendor’s specific listing for count per package.) Brownells Sverige+1
Why Choose CRATEX Replacement Bullet Points 190025084?
Trusted CRATEX quality – widely used by gunsmiths, jewelers, and precision metalworkers
Extra-fine grit for final finishing and ultra-smooth surfaces
#8 bullet profile perfect for curved and hard-to-reach areas
Rubber-bonded abrasive that offers cushioned, low-chatter cutting
1/16" arbor compatibility for use with standard mandrels and rotary tools
If your work demands clean, controlled, and ultra-smooth polishing on small parts and precision surfaces, REPLACEMENT BULLET POINTS 190025084 should be a staple in your abrasive and polishing kit.
The End
