Rival Arms Precision V1 Barrel for Springfield Hellcat — Gold PVD, Spiral Fluted, Threaded, Match-Grade Stainless
Part #: RA-RA20H101E / RARA20H102E • UPC: 813628006527 • Platform: Springfield Armory® Hellcat (9mm) • Finish: Gold PVD • Profile: Spiral Fluted, Threaded
Upgrade your micro-compact with competition-level accuracy and head-turning style. The Rival Arms Precision V1 Barrel for Springfield Hellcat is engineered from match-grade stainless steel and finished in a luxe Gold PVD that’s as durable as it is striking. A spiral-fluted body reduces weight and adds surface area for faster cooling, while the threaded muzzle opens the door to compensators and other muzzle devices (where lawful). If you want tighter groups, smoother cycling, and a custom look that pops, this V1 Hellcat barrel delivers.
Why Choose Rival Arms for Your Hellcat
Match-Grade Accuracy: Precision-machined from stainless steel (commonly 416R) with exacting tolerances for improved lockup and consistency shot to shot.
Gold PVD Finish: Physically Vapor Deposited coating is hard, corrosion-resistant, and slick, helping shed fouling and easing cleanup.
Spiral Fluting: Reduces mass and increases surface area for better heat dissipation—and a custom aesthetic that sets your pistol apart.
Threaded Muzzle: Ready for compensators, thread-on devices, and training suppressor accessories (comply with all laws). Typically includes a matching thread protector.
Drop-In Convenience: Designed as a drop-in upgrade for Springfield Hellcat slides—no gunsmith fitting for most pistols.
Reliable Feeding: Polished feed ramp and chamber geometry to support smooth, consistent cycling with quality 9mm ammunition.
Key Features & Specs
Compatibility: Springfield Hellcat (9mm) — standard models; not for Hellcat Pro unless noted by the manufacturer
Material: Stainless steel (match-grade)
Finish: Gold PVD (wear- and corrosion-resistant)
Rifling: Conventional 9mm rifling (commonly 1:10 twist, 6-groove) for broad bullet compatibility
Profile: Spiral fluted for weight savings and heat management
Muzzle: Threaded (most Rival Arms 9mm Hellcat barrels use 1/2x28; verify your part before ordering)
Crown: Precision target crown for edge protection and consistent gas release
Includes: Thread protector (finish-matched), manufacturer documentation
Part Numbers: RA-RA20H101E / RARA20H102E
UPC: 813628006527
Fitment Note: Some Rival Arms Hellcat barrels are offered in distinct SKUs for threaded vs. non-threaded or finish variations. The listing above references threaded, Gold PVD, spiral-fluted. Confirm your exact part number and thread pitch (commonly 1/2x28) before checkout.
Real-World Performance Gains
Tighter Groups: Match-grade chamber/throat geometry and consistent bore dimensions help stabilize common 9mm bullet weights for smaller, more repeatable groups.
Smoother Cycling: Polished ramp and chamber promote reliable feeding with quality factory ammo.
Modular Muzzle Options: Add a compensator to reduce muzzle rise and speed follow-up shots, or run a thread protector for a sleek EDC profile.
Cooler, Cleaner: Spiral fluting reduces weight and provides additional cooling surface; Gold PVD sheds fouling for faster wipe-downs after range day.
Ideal Use Cases
EDC & Duty (Where Lawful): Dependable accuracy with premium corrosion protection.
Competition & Training: Consistent lockup and sight tracking for faster drills and higher hit probability.
Suppressed/Comp Builds: Threaded muzzle supports your recoil-mitigation strategy and accessory experimentation.
Installation Guide (Drop-In)
Unload & Clear: Verify the firearm is unloaded; remove magazine and check chamber.
Field Strip: Remove the slide, factory barrel, and recoil assembly per Hellcat manual.
Swap Barrels: Place the Rival Arms barrel into the slide.
Reassemble: Install recoil assembly and mount slide to frame.
Function Check: Rack, lock back, and dry cycle. Inspect thread protector tightness.
Test Fire: Confirm reliability with your preferred 9mm loads before carry.
Care & Maintenance
Break-In: Not strictly required, but many shooters run 50–100 rounds to let surfaces mate.
Cleaning: Use standard 9mm bore solvents/rods; Gold PVD’s slickness speeds fouling removal.
Thread Protector: Apply a drop of blue threadlocker or a rubber O-ring if you notice it loosening under fire.
Ammunition: Use high-quality, SAAMI-spec 9mm ammo for best results.
Compliance & Safety
Know the Law: Threaded barrels, comp devices, and suppressors are regulated in some jurisdictions. Verify local, state, and federal rules before use.
Qualified Installation: While drop-in for most pistols, seek a qualified armorer/gunsmith if you encounter unusual fitment.
Function Test: Always verify safe function and point of impact before defensive carry.
Frequently Asked Questions
Q: Will this fit the Hellcat Pro?
A: This SKU is listed for Hellcat. Some Rival Arms barrels are model-specific; verify if you need a Hellcat Pro part before ordering.
Q: What’s the thread pitch?
A: Rival Arms 9mm threaded barrels are commonly 1/2x28. Confirm your box/part listing to be certain.
Q: Is a thread protector included?
A: Rival Arms typically includes a matching thread protector with threaded barrels. Check your package contents at purchase.
Q: Do I need a gunsmith to install it?
A: It’s intended as a drop-in upgrade. If lockup or headspace feels off, consult a qualified professional.
Q: Will Gold PVD wear?
A: All finishes will show wear on high-contact areas over time. PVD is notably hard and corrosion-resistant, offering excellent longevity compared to conventional coatings.
SEO Highlights (Quick Scan)
Rival Arms Precision V1 Hellcat Barrel — Gold PVD, spiral fluted, threaded, stainless match-grade
Drop-in accuracy upgrade for Springfield Hellcat (9mm) with polished feed ramp and target crown
Supports compensators and other 1/2x28 muzzle devices (verify pitch); thread protector included
Part RA-RA20H101E / RARA20H102E, UPC 813628006527 — premium look, proven performance, easy install
Elevate your Hellcat’s precision and style with the Rival Arms Precision V1 Gold PVD Spiral-Fluted Threaded Barrel—a match-grade, drop-in upgrade built for accuracy, reliability, and a custom aesthetic that stands out at the range and on the gram.
"The End"
