Samson DMR Scope Mount — 34mm Rings | 0" Offset | One-Piece Scope Mount/Ring Combo | Black Anodized | Model 030009501 | UPC 855016007303
Lock in your glass with duty-ready rigidity. The Samson DMR Scope Mount (34mm, 0" Offset) is a premium, one-piece scope mount/ring combo engineered to keep modern 34mm optics locked, level, and repeatable under recoil and hard use. With its 0-inch offset and low-profile, black anodized finish, 030009501 delivers a clean, balanced install on AR-pattern uppers and precision bolts alike—ideal where proper eye relief and uncompromising zero retention are non-negotiable.
Model/SKU: 030009501
UPC: 855016007303
Ring Diameter: 34mm
Offset: 0" (neutral)
Finish: Black Anodized (hardwearing, low-glare)
Type: One-piece scope mount + rings (DMR)
Why Shooters Choose the Samson DMR (34mm, 0" Offset)
True one-piece integrity: The integrated base and rings help maintain perfect alignment, minimizing stress on the tube and improving return-to-zero when the rifle takes knocks or rides in a truck case.
34mm precision standard: Purpose-built for premium 34mm scopes—growing in popularity for their elevation travel, robust internals, and superior light transmission.
Neutral eye relief geometry: The 0" offset keeps glass centered over the receiver—ideal for shooters who prefer a square, heads-up position or who run AR buffer tubes/PRS stocks with adjustable LOP and cheek height.
Stout clamping system: A wide, stable footprint and durable cross-bolt interface provide positive rail engagement for consistent zero, even with heavy optics or high round counts.
Hard-use finish: The black anodized surface resists abrasion and corrosion while cutting glare—perfect for competition, duty, or field conditions.
Clean profile, smart clearance: Thoughtful under-bridge relief aids access to turrets and leaves room for rear BUIS or small accessories on many setups.
Performance You’ll Notice
Repeatable precision: Solid alignment and tube support convert into predictable tracking and tight groups at distance.
Stable under recoil: The single-piece structure spreads load across the base so your zero stays put after long strings or rough handling.
Ergonomic sight picture: Neutral offset helps many shooters achieve a natural, upright cheek weld and eye box—especially with LPVOs and mid-power optics.
Ideal Use Cases
DMR/SPR builds: Keep optics centered for precision semi-auto rifles that bridge defensive speed and long-range accountability.
Bolt-gun crossovers: A rock-solid solution for 34mm tactical/PRS scopes on precision bolts running picatinny bases.
Competition & training: Durable enough for multi-gun, carbine matches, and high-rep classes.
Law enforcement & ranch rifles: Low-maintenance, hardwearing mount that holds zero between patrols and pasture work.
Key Features at a Glance
Ring Diameter: 34mm (fits 34mm main tubes)
Offset: 0" neutral (centered over the receiver)
Design: One-piece base + matched rings for inherent alignment
Rail Interface: Picatinny/1913-compatible mounting surface
Material: Precision-machined aluminum (hard anodized)
Finish: Black anodized, low-glare, corrosion-resistant
Hardware: Robust cross-bolts and ring caps (verify contents)
SKU/UPC: 030009501 / 855016007303
Compatibility tip: Verify your optic’s main tube is 34mm. Popular 34mm scopes include high-end LPVOs and precision variables; 30mm or 35mm tubes require different mounts.
Setup & Mounting Best Practices
Mock placement first: Shoulder the rifle with the optic in the mount (loosely installed) to confirm eye relief and head position.
Rail prep: Degrease the rail and mount interface; ensure cross slots are clean.
Square and level: Level the rifle, then the mount, then the scope. Use a plumb line or leveling wedges for the reticle.
Torque correctly: Tighten cross-bolts and ring cap screws to manufacturer-recommended values using a calibrated torque wrench.
Gap & sequence: Maintain even cap gaps and follow an X-pattern during torque to keep the tube stress-free.
Witness mark: Paint-pen critical fasteners and recheck after the first range session.
Always refer to Samson’s official torque specs and your scope manufacturer’s guidance to avoid over/under-tightening.
Frequently Asked Questions
Q: Will this work on my AR-15 upper?
A: Yes, the mount is designed for Picatinny/1913 rails found on most AR-15/AR-10 receivers and many bolt-gun bases.
Q: Why choose 0" offset?
A: Neutral offset keeps your optic centered over the receiver, which many shooters prefer for a square stance, consistent cheek weld, and simplified cable/laser routing.
Q: Is it tall enough for an LPVO on an AR?
A: The DMR geometry is designed for proper AR height with most 34mm scopes. Confirm your desired centerline height and optic objective clearance for accessories/BUIS.
Q: Can I bridge across the receiver and handguard?
A: For best repeatability, mount on the receiver rail only, not across separate rail sections that can flex differently.
Q: Does it include hardware?
A: Samson DMR mounts typically include the necessary cross-bolts and ring cap screws; verify contents for this SKU at purchase.
Care & Maintenance
Periodic checks: Inspect torque on cross-bolts and cap screws, especially after travel or heavy use.
Keep it clean: Wipe away dust and debris; avoid harsh chemicals that attack anodizing.
Protect the tube: When changing optics, support the scope to prevent kinking or scratch marks.
SEO-Friendly Highlights (Naturally Woven)
Samson DMR Scope Mount 34mm, 0" offset one-piece mount/ring combo, black anodized finish, precision aluminum, Picatinny/1913 compatible, AR & bolt-gun ready, repeatable zero, robust cross-bolts, 030009501, UPC 855016007303.
Meta for Your Product Page
Meta Title: Samson DMR Scope Mount — 34mm Rings, 0" Offset, Black Anodized | 030009501
Meta Description: One-piece 34mm scope mount with 0" offset for ARs and precision bolts. Black anodized, Picatinny compatible, rock-solid zero retention. SKU 030009501 — UPC 855016007303.
From LPVOs to long-range glass, the Samson DMR 34mm, 0" Offset Scope Mount delivers the alignment, durability, and repeatability your rifle deserves—so your zero stays where your skill puts it.
The End
