Samson Quick Flip Front Sight (A2) Black Flip Up for AR-15 0200029010

Samson Quick Flip Front Sight (A2) — Black | Flip-Up Front Iron for AR-15 | Model: 0200029010 | UPC: 851725003100 Upgrade your rifle with a rock-solid, fast-deploying iron sight that just works. The Samson Quick Flip Front Sight (A2), Black gives AR-15 shooters a durable, low-profile front sight that flips up instantly and locks positively in place. Featuring a standard A2 front sight post for easy elevation adjustments and 1913 Picatinny compatibility, this folding front sight is perfect for co-witnessing with red dots, running as a primary on a minimalist build, or standing by as a dependable backup iron sight (BUIS). Why Choose the Samson Quick Flip Front (A2) Fast Flip-Up Deployment: Intuitive, spring-assisted* action for rapid on-target alignment when seconds matter. Locks Solid: Positive lockup in the upright position resists movement under recoil and during manipulations. A2 Front Sight Post: Uses the proven, standard A2 post—click-adjustable for elevation with a common tool or cartridge tip. Low-Profile When Stowed: Slim, snag-resistant profile folds flat to keep your sight picture clean and your rifle streamlined. Rugged Build: Precision-machined aluminum (with steel hardware) and a hard black finish designed for harsh range days and tough field conditions. Optics-Ready Co-Witness: Works as a BUIS in front of red dots/holographic sights; set up for absolute or lower-1/3 co-witness depending on your mount height. *Deployment method varies by generation; models commonly use a spring-loaded, push-button design. Key Features at a Glance Type: Flip-up front sight (A2) for AR-15 Mount: MIL-STD-1913 Picatinny clamp Post: A2 square post, elevation adjustable Finish/Color: Black (hardcoat) Operation: Quick-flip, locks in the up position Profile: Low and compact when folded Model: 0200029010 UPC: 851725003100 Performance You Can Feel Repeatable Zero: Tight tolerances and a firm lockup help maintain zero through live-fire and transport. Confident Manipulation: A textured button/lever (model dependent) gives positive purchase—even with gloves. Clear Sight Picture: A2 post gives a familiar, crisp front sight reference for precise holds at practical distances. Compatibility & Fit Notes Rail Height: Designed for standard 1913 Picatinny top rails. If your rifle has a gas-block rail that sits lower than the receiver rail, select a gas-block-height front sight model instead to maintain correct sight alignment. Rear Sight Pairing: Works with most folding or fixed rear BUIS (A2 aperture or similar). Co-Witness: Pairs well with common red-dot mounts (absolute or lower 1/3). Choose mount height based on your preference. Installation (Quick Guide) Clear the Firearm: Remove magazine; verify the chamber is empty. Place on Rail: Position the sight at the desired slot (typically last slot on the handguard/rail). Torque the Clamp: Tighten per Samson/fastener spec; use medium threadlocker on clean threads if recommended. Zero the Sight: At 25–50 yards (or your chosen distance), adjust elevation via the A2 post; pair with a rear sight for windage. Tip: Mark your rail position with a paint pen to make re-installation fast and repeatable after cleaning or transport. Ideal Use Cases BUIS for Optic-Equipped Carbines: A dependable backup that stays out of the way until you need it. Minimalist/Lightweight Builds: Primary iron solution that keeps weight and bulk low. Training & Defense: Proven A2 geometry for consistent hits and straightforward zeroing. Care & Maintenance Keep it Clean: Brush carbon/dust from the pivot and detent. Check Hardware: Verify clamp and pivot screws after initial range sessions. Protect the Finish: Wipe with a silicone cloth to repel moisture. What’s in the Box Samson Quick Flip Front Sight (A2) — Black Mounting hardware (factory-included) User information (per packaging) Frequently Asked Questions Q: Will this work on my gas-block rail? A: If your gas-block rail is lower than the receiver rail, you’ll need a gas-block-height front sight. This model is intended for receiver-height Picatinny rails. Q: How do I adjust elevation? A: Rotate the A2 front sight post using a front sight tool, small flat tool, or cartridge tip. Each click changes point of impact in small, predictable increments. Q: Does it lock when folded? A: The sight locks in the up position for stability. It folds down to a low profile for storage/transport; detent tension keeps it closed until deployed. Q: Can I co-witness with my red dot? A: Yes. Use an absolute or lower-1/3 mount height based on your preference; the sight is designed to align with standard receiver-height systems. SEO Highlights (For Shoppers) Samson Quick Flip Front Sight (A2) Black Flip-up AR-15 front sight with A2 adjustable post Picatinny rail clamp, low-profile folding design Backup iron sight (BUIS) compatible with red dots for co-witness Model 0200029010, UPC 851725003100 Equip your AR with a front sight that deploys fast, locks solid, and holds zero. The Samson Quick Flip Front Sight (A2), Black delivers trusted A2 precision in a rugged, low-profile folding package—ready for training, defense, and the range. "The End"