Sauer 505 Factory Barrel — .223 Rem, 1/2"x28 Thread (Model: 80117159 | Alt: 80118488 | UPC: 810496025247)

Unlock the versatility of your Sauer 505 with the factory .223 Rem barrel featuring a 1/2"x28 threaded muzzle for brakes and suppressor compatibility (where legal). Designed specifically for the 505’s modular, switch-barrel system, this genuine Sauer component delivers factory headspaced precision, easy installation, and repeatable accuracy—so you can train economically, hunt varmints, or set up a lightweight recoil-friendly rig without buying another rifle.

Why Choose the Sauer 505 .223 Rem Barrel

• True factory fit & accuracy: Purpose-built for the Sauer 505 platform, with factory headspacing and geometry that maintain reliability and precision.

• 1/2"x28 threaded muzzle: The most common thread pitch for .22-caliber centerfire rifles, ready for muzzle brakes, comps, and suppressors (observe all local/federal laws).

• Caliber flexibility, same rifle: Run low-recoiling .223 Rem for varminting, predator control, and high-volume range sessions without beating up your shoulder—or your wallet.

• Modular 505 design: Swap barrels to match terrain and game while keeping the same trusted stock, trigger, and optic—a huge advantage for consistent ergonomics.

• Factory reliability: Genuine Sauer manufacturing, materials, and QC for confidence from the bench to the backcountry.

Ideal Use Cases

• Varmint & predator hunts: Flat-shooting .223 Rem with modern V-Max/Ballistic Tip loads for coyotes, foxes, and small game.

• Ranch & property: Lightweight, low-recoil performance for day-to-day utility and pest control.

• Training & practice: Cheaper ammo, less fatigue—more reps on fundamentals and positional shooting.

Feature Highlights

• Threaded muzzle (1/2"x28): Ready for brakes or suppressors to tune recoil impulse and shot-to-shot recovery.

• Sauer 505 interface: Drop-in compatibility with the 505’s receiver/forend system for repeatable alignment and zero retention after reinstallation (verify your rifle’s procedure).

• Factory chambering: .223 Remington chamber for excellent ammo availability and broad bullet selection.

Specifications

• Platform: Sauer 505 rifles

• Caliber: .223 Remington

• Muzzle Thread: 1/2"x28 (standard .22-cal centerfire)

• Model / MPN: 80117159

• Alternate Part: 80118488

• UPC: 810496025247

• Finish/Length: Factory Sauer configuration (varies by production; verify exact length/finish with your dealer)

Compatibility Notes: Some caliber conversions may require a caliber-specific bolt head and/or magazine. Consult your Sauer 505 manual or dealer to confirm any additional parts needed for .223 Rem operation.

What’s in the Box

• Sauer 505 Factory Barrel — .223 Rem, 1/2"x28 threaded

• Factory documentation (where included)

Installation & Setup Tips

1. Unload & verify clear: Remove the magazine; visually and physically inspect the chamber.

2. Follow the manual: The 505’s switch-barrel system is designed for user-level changes—use the specified tools and sequence.

3. Torque matters: Apply the manufacturer’s torque specifications to the barrel/forend interface and any clamping screws.

4. Muzzle device: When installing a brake or suppressor, verify 1/2"x28 threading, use proper shims/crush washer as directed, and confirm bullet clearance.

5. Function & zero: Test feed/ejection with your chosen .223 Rem ammo; re-zero your optic and confirm POI stability after reinstallations.

Care & Maintenance

• Break-in & cleaning: Follow Sauer’s break-in guidance (if provided) and clean with quality .22-cal rods, jags, and copper solvent.

• Thread care: Keep muzzle threads protected with a thread protector when no device is installed; apply a light oil film to prevent corrosion.

• Seasonal checks: Re-verify fastener torque after temperature swings, travel, or high round counts.

Safety, Compliance & Purchasing

• Suppressor/legal note: Use of threaded barrels and suppressors is regulated. Confirm all federal, state, and local laws before installation and use.

• Ammunition: Use only quality .223 Remington ammunition that meets SAAMI/CIP specs.

• Professional help: If unsure about parts compatibility or installation, consult a qualified gunsmith.

SEO Meta Assets

Meta Title: Sauer 505 Barrel — .223 Rem, 1/2"x28 Thread | 80117159 (Alt 80118488), UPC 810496025247
Meta Description: Upgrade your Sauer 505 with the factory .223 Rem barrel. 1/2"x28 threaded muzzle for brakes/suppressors, factory headspaced precision, drop-in fit. MPN 80117159 (Alt 80118488), UPC 810496025247.
Target Keywords: Sauer 505 .223 barrel, 80117159, 80118488, 810496025247, 1/2x28 threaded barrel, Sauer 505 switch barrel, .223 Rem Sauer barrel, factory headspaced barrel

Key Benefits at a Glance

• Factory headspaced Sauer 505 barrel for .223 Rem

• 1/2"x28 thread for brakes and suppressors

• Maintains consistent ergonomics across calibers on one rifle

• Ideal for varminting, training, and low-recoil shooting

• Genuine Sauer quality for accuracy and reliability

When you want .223 Rem precision, recoil control, and the efficiency of a switch-barrel system, the Sauer 505 Factory Barrel (.223 Rem, 1/2"x28) is the smart, factory-correct upgrade that keeps your rifle adaptable—and accurate.

"The End"