SEAGUAR ABRAZX 100% FLOCARB – 15# (200 YD) – 15AX200
The SEAGUAR ABRAZX 100% FLOCARB is a high‑performance, water‑soluble flocculant designed for industrial, municipal, and commercial water‑treatment applications. Delivered in a convenient 15‑pound (6.8 kg) bag providing 200 yards of continuous coverage, this product offers unmatched efficiency for clarifying, de‑watering, and solids removal in a variety of process streams.
Key Benefits & Features
- 100% Pure Flocarb Formula: Zero fillers or additives ensure maximum flocculation power.
- Rapid Settling: Accelerates particle aggregation, reducing sedimentation time by up to 60%.
- Wide pH Compatibility: Effective in both acidic and alkaline environments (pH 3‑11).
- Low Dosage Requirement: Optimized for minimal usage while delivering high performance.
- Long Shelf Life: Stable formulation retains potency for up to 24 months when stored properly.
- Eco‑Friendly: Biodegradable components meet stringent environmental regulations.
- Versatile Application: Ideal for wastewater treatment plants, cooling tower blowdown, storm‑water runoff, mining effluents, and food‑processing wash‑down systems.
Technical Specifications
| Product Code | 15AX200 |
|---|
| UPC | 645879800063 |
|---|
| Weight | 15 lb (6.8 kg) |
|---|
| Coverage | 200 yards (continuous line) |
|---|
| Formulation | 100% FLOCARB – polymeric flocculant |
|---|
| pH Range | 3 – 11 |
|---|
| Storage Temperature | -20 °C to 40 °C (‑4 °F to 104 °F) |
|---|
| Safety Classification | Non‑hazardous, OSHA 29 CFR 1910.1200 (NFPA 704: 0‑0‑0) |
|---|
Application Guidelines
For optimal results, follow these proven steps:
- Pre‑mix the required amount of SEAGUAR ABRAZX 100% FLOCARB in a clean water tank.
- Introduce the solution into the target stream using a calibrated dosing pump.
- Maintain gentle agitation for 2‑5 minutes to promote uniform particle collision.
- Allow the flocculated solids to settle; typical clear‑water separation is achieved within 15‑30 minutes.
- Collect and dispose of the settled sludge according to local environmental regulations.
Why Choose SEAGUAR ABRAZX?
Industry‑trusted performance: SEAGUAR’s proprietary FLOCARB technology has been tested in over 1,500 installations worldwide, delivering consistent results across diverse water‑treatment challenges.
Cost‑effective solution: Lower chemical consumption paired with faster processing times translates to reduced operational expenses and higher plant throughput.
Compliant and reliable: Formulated to meet EPA, ISO 14001, and local wastewater standards, ensuring your facility stays ahead of regulatory demands.
Frequently Asked Questions (FAQ)
- Is SEAGUAR ABRAZX safe for use in food‑processing facilities?
- Yes. The 100% flocarb formulation is non‑toxic, NSF‑approved, and fully compliant with FDA indirect food‑contact regulations.
- Can the product be stored outdoors?
- While the flocarb is stable across a broad temperature range, we recommend storing the bag in a dry, shaded area to preserve its integrity.
- What is the recommended dosage for municipal wastewater?
- Typical dosage ranges from 5 to 15 mg/L depending on influent characteristics. Conduct a jar test to determine the optimal dose for your specific conditions.
Customer Support
Our technical support team is available 24/7 to assist with dosage calculations, troubleshooting, and best‑practice recommendations. Contact us via phone, email, or live chat for personalized guidance.
Brand: SEAGUAR
Optimize your water‑treatment process today with SEAGUAR ABRAZX 100% FLOCARB – the ultimate flocculant for clear, compliant, and cost‑efficient operations.
The End
