Seekins Precision 0 MOA Scope Base — #6-48 Screws, Fits Remington 700 Short Action, Black Finish (Model 0010710013 | UPC 811452025257)

Build your Remington with a foundation you can trust. The Seekins Precision 0 MOA Scope Base for Remington 700 Short Action delivers a true, level interface for hunting and precision optics. Machined for rigidity and repeatability, this Picatinny rail includes #6-48 mounting screws and a tough black finish that resists the elements. If you want a reliable zero at 50–200 yards with maximum internal elevation reserved for closer holds or lightweight glass, a 0 MOA base is the right choice.

Why Choose a Seekins 0 MOA on a Remington 700 SA

• True 0 MOA Geometry: Keeps your scope close to optical center for short- to mid-range zeros (common for big-game hunting), simplified ballistic holds, and plenty of down adjustment.

• Remington 700 Short-Action Footprint: Correct screw spacing and contour for 700 SA receivers; also compatible with many 700-pattern clones using #6-48 threads (verify your action).

• Rock-Solid Alignment: Precision machining promotes parallel bearing surfaces so rings clamp evenly, reducing scope stress and tracking errors.

• 1913 Picatinny Interface: Accepts a wide range of rings and one-piece mounts—easy to standardize across rifles.

• Field-Ready Black Finish: Low-glare, corrosion-resistant coating stands up to rain, solvent, and hard travel.

Best For

• Big-game hunting rifles zeroed at 100–200 yards with minimal dialing.

• Lightweight backcountry builds using compact scopes with moderate turret travel.

• General-purpose 700s that prioritize a clean zero, simple holds, and rugged reliability.

Performance Benefits You’ll Notice

• Consistent zero through temperature swings and round counts thanks to a rigid, true rail.

• Simplified ballistics for classic hunting distances—less dialing, more intuitive holds.

• Broad mount compatibility with quality 1913-spec rings and monolithic mounts.

Installation Overview (Quick Guide)

1. Unload & clear the rifle; remove the bolt.

2. Degrease receiver threads and screws; ensure the receiver top is clean and burr-free.

3. Set the base in place; hand-start all #6-48 screws to avoid cross-threading.

4. Torque evenly in sequence to the manufacturer’s spec (commonly 15–25 in-lb—confirm with your instructions).

5. Threadlocker: Apply a removable (blue) threadlocker sparingly if desired.

6. Witness mark screws and re-check torque after your first range session.

Pro Tip: After mounting the base, level the rifle and optic before tightening ring caps. Use a calibrated inch-pound wrench to prevent tube distortion.

Specifications

• Brand: Seekins Precision

• Product: 0 MOA Scope Base

• Receiver Fit: Remington 700, Short Action (700-pattern; check thread spec)

• Cant: 0 MOA

• Interface: MIL-STD-1913 Picatinny

• Mounting Hardware: #6-48 screws (included)

• Finish: Black, low-glare, corrosion resistant

• Model #: 0010710013

• UPC: 811452025257

Compatibility & Fit Notes

• Designed for Remington 700 Short Action receivers tapped #6-48.

• Some custom or modern 700-pattern actions use #8-40 screws—verify before ordering.

• Works with most 1913-compatible rings and one-piece mounts. Check scope objective/handguard clearance with your ring height.

Care & Maintenance

• Wipe clean after solvent exposure; keep rail slots free of grit.

• Re-check screw torque after heavy use, travel, or large temperature swings.

• Inspect for witness-mark movement to catch loosening early.

Who It’s For

• Hunters who value a simple, dependable zero and minimal complexity in the field.

• General-purpose shooters building a rugged, do-it-once optic interface.

• 700-pattern builders seeking a quality Picatinny base with standard #6-48 hardware.

SEO-Friendly Keywords (Use Naturally on Your Product Page)

Seekins Precision 0 MOA scope base Remington 700 short action, #6-48 screw scope rail, black Picatinny base for Rem 700 SA, 0010710013, UPC 811452025257, hunting rifle scope base 0 MOA, Remington 700 optics rail Picatinny.

Set your Remington 700 SA up for success with the Seekins Precision 0 MOA Scope Base—a true, rugged Picatinny rail with #6-48 hardware and a black finish that’s built to hold zero season after season.

The End