Seekins Precision 30 MOA Scope Base — #6-48 Screws, Fits Remington 700 Short Action, Black Finish (Model 0010710023 | UPC 811452025301)
Stretch your Remington 700’s effective range with the Seekins Precision 30 MOA Scope Base for Short Action receivers. This purpose-built Picatinny rail adds 30 minutes of angle (MOA) of elevation, preserving more of your scope’s “up” travel for mid- to long-range dialing while keeping a solid 100- or 200-yard zero. Precision machined and finished in a durable low-glare black, the base mounts with the included #6-48 screws and provides a true, stable interface for modern rings and one-piece mounts.
Why Choose a Seekins 30 MOA Base
More Elevation, More Distance: The integrated 30 MOA cant shifts your optic closer to its optical center and preserves elevation travel, a must for 700s chambered in 6.5 Creedmoor, .308 Win, 6.5 PRC, and other long-range favorites.
Remington 700 SA Footprint: Correct screw spacing and receiver contour for Remington 700 Short Action and many 700-pattern clones tapped #6-48 (verify your action before ordering).
Rock-Solid Alignment: Precision machining promotes parallel bearing surfaces, helping rings clamp evenly to reduce scope stress and promote consistent tracking.
MIL-STD-1913 Picatinny: Universal compatibility with quality Picatinny/1913 rings and monolithic mounts—standardize your setup across rifles.
Weather-Ready Finish: Tough black, corrosion-resistant coating stands up to rain, solvents, and hard use without reflective glare.
Best For
Long-range hunting or steel where dialing is routine.
Precision rifle builds that need reliable tracking beyond 600–1,000 yards.
Compact scopes with limited turret travel that still need distance capability.
Real-World Benefits You’ll Notice
Dial farther, hold less: The 30 MOA bias increases available elevation for dope at extended ranges.
Stable zero: Rigid, true rail helps maintain point of impact across temperature swings and heavy round counts.
Clean setup: Picatinny slots provide flexible ring spacing for optimum eye relief and scope mounting.
Installation Overview (Quick Guide)
Unload & clear the rifle; remove the bolt.
Degrease the receiver threads and #6-48 screws; ensure the receiver top is clean and burr-free.
Set the base in place; hand-start all screws to avoid cross-threading.
Torque evenly in sequence to the manufacturer’s spec (commonly 15–25 in-lb—confirm with the included instructions).
Threadlocker: Apply a removable (blue) threadlocker sparingly to clean threads if recommended.
Witness-mark screws and re-check torque after your first range session or major temperature changes.
Pro Tip: After installing the rail, level the rifle and scope carefully before tightening ring caps. Use a calibrated inch-pound wrench to prevent tube deformation.
Compatibility & Fit Notes
Receiver: Remington 700 Short Action, tapped #6-48.
Some 700-pattern actions are tapped #8-40—verify thread spec before purchase.
Works with most 1913 Picatinny rings and one-piece mounts. Confirm objective clearance with your ring height, barrel contour, and flip-cap size.
Specifications
Brand: Seekins Precision
Product: 30 MOA Scope Base
Cant: 30 MOA
Receiver Fit: Remington 700, Short Action
Mounting Hardware: #6-48 screws (included)
Rail Standard: MIL-STD-1913 Picatinny
Finish: Black, low-glare, corrosion resistant
Model #: 0010710023
UPC: 811452025301
Care & Maintenance
Keep rail slots clean and grit-free for consistent clamping friction.
Wipe down after solvent exposure; avoid harsh abrasives on the finish.
Inspect & re-torque after heavy use, long travel, or large temperature swings.
Who It’s For
Hunters who run compact glass but still want long-range dialing headroom.
Precision shooters who need a reliable, tracked interface that pushes their scope’s elevation farther.
R700 builders standardizing on a rugged, true Picatinny base with common #6-48 hardware.
SEO-Friendly Keywords (Use Naturally on Your Product Page)
Seekins Precision 30 MOA scope base Remington 700 short action, #6-48 screw Picatinny rail, long-range scope base 30 MOA, black optics rail for Rem 700 SA, 0010710023, UPC 811452025301, hunting rifle scope base, Remington 700 Picatinny mount.
Unlock more dialing range and long-range confidence with the Seekins Precision 30 MOA Scope Base—a rugged, true Picatinny rail for your Remington 700 Short Action that’s built to hold zero and go the distance.
The End
