Seekins Precision Scope Rings — 1.26" Extra-High, 34mm Tube, 4-Cap-Screw, Black Finish (Model 0010630010 | UPC 811452025141)
Give your long-range optic a rock-solid foundation with the Seekins Precision 1.26" Extra-High 34mm Scope Rings. Purpose-built for modern glass with large objectives and tall turret housings, these rings combine CNC-machined precision, a rugged black, low-glare finish, and a 4-cap-screw design that distributes clamping force evenly around the tube. The result is repeatable alignment, dependable zero retention, and the clearance you need for 50–56 mm objectives over rails, handguards, and heavy barrel profiles (always verify your setup).
Why These Seekins 1.26" Extra-High 34mm Rings Stand Out
True 34mm Precision: Meticulously machined bearing surfaces maintain concentricity to reduce scope stress and promote consistent tracking.
Extra-High 1.26" Centerline: Ideal for large-objective optics, tall bolt handles, chassis rifles with adjustable combs, and AR-height builds that benefit from a heads-up posture.
Even, Secure Clamping: 4 cap screws per ring spread torque uniformly, improving grip and helping your scope hold zero under recoil and hard use.
Durable Black Finish: Low-glare, corrosion-resistant coating stands up to rain, dust, solvents, and travel.
Strength-to-Weight Balance: Aluminum construction keeps ounces down while preserving the stiffness precision shooters demand.
Field Benefits You’ll Notice
POI Stability: Tight tolerances + even clamping = fewer shifts through temperature swings and long shot strings.
Accessory & Cap Clearance: Extra height accommodates flip caps, sunshades, and NV/thermal clip-on bridges (measure your rail height and objective diameter).
Ergonomics That Work: Higher optical centerline pairs well with AR-pattern receivers and many chassis stocks for a natural cheek weld.
Ideal Use Cases
Long-range hunting with 34mm scopes and 50–56 mm objectives.
PRS/NRL competition where constant dialing and rugged stages demand alignment you can trust.
AR-10/AR-15 builds requiring additional height over handguards or when running inline accessories.
Installation Best Practices
Verify unloaded; secure rifle safely.
Degrease ring/base screws and mating surfaces; apply removable (blue) threadlocker only if recommended.
Square & snug rings to a quality Picatinny/1913 base per manufacturer guidance.
Set eye relief at max magnification; level the reticle with the rifle leveled.
Torque ring caps in an X-pattern to your scope maker’s spec (commonly 15–20 in-lb for 34mm tubes).
Confirm even cap gaps and witness-mark screws; recheck after your first range session.
Pro tip: Over-torque can deform a scope tube and degrade tracking. Always use a calibrated inch-pound wrench.
Key Features at a Glance
Tube Diameter: 34mm
Ring Height (Centerline): 1.26" (Extra-High)
Cap Screws: 4 per ring (even clamping)
Material: Precision-machined aluminum
Finish: Black, low-glare, corrosion-resistant
Interface: Fits Picatinny/1913 bases/rails (verify your base type)
Model #: 0010630010
UPC: 811452025141
Compatibility & Fit Notes
Optimized for 34mm scopes from leading manufacturers; check your objective + cap + rail height to confirm clearance.
Excellent choice for 56 mm objectives on many receivers; heavy barrel contours or unusually tall handguards may require confirming measurements.
Suitable for bolt guns and AR-pattern rifles where extra height improves ergonomics or clearance.
Care & Maintenance
Inspect and re-torque after travel, high round counts, or big temperature swings.
Keep clamping faces clean and grit-free for consistent friction.
Wipe with a soft cloth after exposure to solvents; avoid abrasive pads on the finish.
Who It’s For
Precision shooters demanding rigid alignment and repeatable zero.
Backcountry hunters who need strong, lightweight rings for big-objective glass.
AR builders seeking extra height for comfort, clearance, and accessory integration.
SEO-Friendly Keywords (Use Naturally on Your Product Page)
Seekins Precision 34mm scope rings 1.26, extra-high 34mm rings black, four cap screw scope rings, long-range scope rings 56mm objective clearance, 34mm rings for AR-10 AR-15, model 0010630010, UPC 811452025141, precision rifle scope mounts.
Lock in your glass with confidence—the Seekins Precision 1.26" Extra-High 34mm Scope Rings deliver true alignment, even clamping, and a durable black finish built for hunts, matches, and miles.
The End
