Seekins Precision Scope Rings — 1.45" High, 34mm Tube, 4-Cap-Screw, Black Finish (Model 0010630012 | UPC 811452025158)
Give large-objective 34mm optics the space and stability they need. The Seekins Precision 1.45" High 34mm Scope Rings deliver uncompromising alignment and clearance for today’s tall turret housings, 56 mm objectives, flip caps, and clip-on accessories. Precision CNC-machined with even 4-cap-screw clamping, these rings lock your scope in place, protect the tube from point-pressure, and hold zero through recoil, weather, and hard miles. A durable low-glare black finish resists corrosion and blends seamlessly with modern rifles and chassis.
Why These Seekins 1.45" High Rings Stand Out
True 34mm concentricity: Meticulous machining creates parallel, uniform bearing surfaces that minimize tube stress and promote consistent tracking.
Generous 1.45" centerline height: Extra headroom for 56 mm objectives, sunshades, and flip caps over rails, handguards, and heavy barrel contours (always measure your setup).
4-cap-screw security: Four fasteners per cap distribute torque evenly around the tube for rock-solid zero retention without hot-spotting.
Matte black durability: Tough, low-glare finish shrugs off rain, dust, and common solvents while keeping signatures subdued in the field.
Strength-to-weight balance: Rigid aluminum construction keeps ounces off backcountry builds without compromising stiffness.
Field Benefits You’ll Notice
POI stability across conditions: Tight tolerances and uniform clamping help maintain zero through temperature swings and long shot strings.
Ergonomics for modern setups: Higher centerline pairs naturally with AR-pattern receivers, tall combs, night-vision bridges, and clip-on thermals while preserving a comfortable, heads-up posture.
Accessory clearance made easy: Extra vertical room reduces interference with rail-mounted lights, laser modules, and barricade stops.
Ideal Use Cases
Long-range/ELR hunting: Pair with 34 mm scopes featuring 50–56 mm objectives and big elevation stacks.
PRS/NRL competition: Durable alignment for constant dialing and positional abuse.
AR-10/AR-15 carbines & DMRs: Achieve proper eye line over high handguards and maintain a natural, upright mount.
Installation Best Practices
Verify unloaded and secure the rifle in a level cradle.
Degrease ring screws, cross-bolts, and mating faces; apply removable (blue) threadlocker only if recommended by the manufacturer.
Square rings to the base: Mount to a quality Picatinny/1913 rail and snug cross-bolts evenly.
Set eye relief at max magnification; level the reticle with the rifle leveled.
Torque cap screws in an X-pattern to your scope manufacturer’s spec (often 15–20 in-lb for 34 mm tubes).
Confirm even cap gaps and witness-mark screws; recheck after the first range session and significant temperature changes.
Pro tip: Over-torquing can deform a scope tube and compromise tracking. Use a calibrated inch-pound wrench.
Key Features at a Glance
Tube Diameter: 34 mm
Ring Height (Centerline): 1.45" (High)
Cap Screws: 4 per ring for even clamping
Material: Precision-machined aluminum
Finish: Matte black, low-glare, corrosion-resistant
Interface: Fits Picatinny/1913 bases and rails (verify your base type)
Model #: 0010630012
UPC: 811452025158
Compatibility & Fit Notes
Excellent for scopes with large objectives (50–56 mm), tall turrets, and flip caps; always verify clearance against your barrel contour and rail height.
Works on bolt guns and AR-pattern rifles; especially helpful for NV/thermal clip-ons or high handguards.
Check your scope maker’s torque guidance and ring spacing requirements for best results.
Care & Maintenance
Inspect & re-torque after heavy use, travel, or major temperature swings.
Keep clamping faces clean and grit-free.
Wipe with a soft cloth after solvent exposure; avoid abrasive pads on the finish.
Who It’s For
Precision shooters who demand rigid alignment and repeatable zero.
Backcountry hunters needing dependable, lightweight rings for big-objective glass.
AR builders seeking higher optical centerlines for comfort, clearance, and accessory integration.
SEO-Friendly Keywords (Use Naturally on Your Product Page)
Seekins Precision 34mm scope rings 1.45, high 34mm scope rings black, 4 cap screw scope rings, 56mm objective clearance rings, PRS NRL scope rings, AR-10 AR-15 34mm high rings, model 0010630012, UPC 811452025158, precision rifle scope mounts.
**Lock in your glass with confidence—the Seekins Precision 1.45" High 34mm Scope Rings provide true alignment, generous clearance, and a durable matte black finish built for hunts, matches, and miles.
The End
