Seekins Precision Scope Ring – 0.92" Medium-High, 30mm Tube, 4-Cap-Screw, Black Finish | 0010620010 | UPC 811452025059
Lock in your zero with the confidence of precision machining. The Seekins Precision Scope Ring in 0.92" Medium-High height delivers rock-solid optic mounting for 30mm scopes on modern rifles. With 4 cap screws per ring and a durable black finish, model 0010620010 provides the clamping force, alignment, and repeatable return to zero serious shooters demand—whether you’re stretching distance at the range or dialing elevation in the field.
Model/SKU: 0010620010 • UPC: 811452025059
Height (centerline): 0.92" (Medium-High) • Tube Size: 30mm • Cap Screws: 4 per ring
Mount Type: Picatinny/1913-compatible base (most precision rifle rails)
Why Choose Seekins Precision 0.92" Medium-High Rings?
True-to-spec 30mm bore: Concentric, precision machining supports your optic evenly to help maintain tracking accuracy and reduce scope stress.
Secure 4-screw cap design: Balanced clamping across the scope tube helps resist movement under recoil and during rough field use.
Medium-High 0.92" height: A sweet spot for many 40–50mm objective lenses on bolt guns and AR-pattern rifles, often clearing barrels and handguards while preserving a natural cheek weld.
Durable black finish: Hard-wearing, low-glare coating stands up to abuse, weather, and frequent transport.
Repeatable zero: Quality interface geometry and even torque application help your rifle hold zero session after session.
Key Features
Height: 0.92" centerline (Medium-High) for comfortable head position and objective clearance
Tube Diameter: 30mm (common for precision, tactical, and hunting optics)
Cap Hardware: 4 screws per cap for even load distribution and reliable retention
Finish: Black, low-glare for reduced visual signature and improved corrosion resistance
Base Compatibility: Picatinny/1913 rails on precision bolt guns and AR platforms
Pair-Matched: Rings are manufactured to tight tolerances for alignment and consistency
Fitment Tip: Objective bell diameter, rail height, barrel contour, and any flip-up covers can influence clearance. The 0.92" height is a popular starting point for 30mm scopes with ~44–50mm objectives, but always measure your specific setup.
Performance Advantages You’ll Notice
Stable zero under recoil: Even, rigid clamping and precise ring geometry help prevent scope shift on magnum and high-round-count rifles.
Better optical performance: Proper height and alignment make it easier to achieve a natural sight picture and consistent eye relief.
Cleaner installation: The 4-screw cap layout simplifies uniform torque and reduces the risk of tube marring when installed correctly.
All-conditions reliability: The robust finish and hardware are built for range days, matches, and backcountry hunts.
Ideal Use Cases
Precision & PRS-style rifles using 30mm tactical optics with elevation turrets and mid-size objectives
Hunting rigs where reliability and light weather resistance are essential
AR-15/AR-10 builds seeking a practical, consistent optic height for prone and positional shooting
General long-range setups that need repeatable mounting and straightforward maintenance
Installation & Torque (General Guidance)
Prep surfaces: Degrease rail and ring interfaces; confirm screws are clean and lightly oiled if specified by the manufacturer.
Base mount: Set the ring bases on a Picatinny/1913 rail; push forward in the slot and snug the cross bolts.
Scope placement: Set the scope in the lower rings, establish eye relief at your highest magnification, level the reticle, then install caps.
Torque evenly: Tighten cap screws in an alternating X-pattern to the manufacturer’s torque specs (commonly 15–25 in-lb for cap screws; check your specific instructions).
Final check: Confirm clearance for objective bell and caps, cycle the bolt/charge handle for interference, and re-verify level.
Pro Tip: After your first range session, re-check torque on cap and base screws. Aluminum rings benefit from a quick verification once everything has settled.
Technical Specs (Quick Reference)
Brand: Seekins Precision
Product: Scope Ring (pair)
Tube Size: 30mm
Centerline Height: 0.92" (Medium-High)
Cap Screws: 4 per ring (8 total across the pair)
Finish: Black (low-glare, durable)
Base: Picatinny/1913 compatible
SKU: 0010620010
UPC: 811452025059
FAQs
Q: Will these rings fit a Weaver base?
A: They are designed for Picatinny/1913 rails. Some Weaver rails can work, but for best results use a true Picatinny base.
Q: Is 0.92" tall enough for a 50mm objective?
A: Often yes—especially on actions with standard height rails—but always confirm with your barrel contour, rail height, and scope cover thickness.
Q: Are lapping or shims required?
A: Not typically for quality rails and scopes. If alignment is off due to receiver or rail variance, consult a professional before using shims or lapping.
Q: What torque should I use?
A: Follow the Seekins/optic manufacturer’s published torque values. Common guidance is 15–25 in-lb for cap screws and 45–65 in-lb for cross bolts, but always confirm your exact instructions.
SEO-Optimized Highlights & Keywords
Seekins Precision scope rings 0.92" medium-high for 30mm scopes
4-screw cap design, black finish, model 0010620010, UPC 811452025059
Picatinny/1913 compatible rings for bolt guns and AR platforms
Precision-machined rings for repeatable zero, stable clamping, and consistent eye relief
Best 30mm medium-high scope rings for precision shooting, hunting, and AR-10/AR-15 builds
Mount Once, Trust Always
For shooters who demand no-compromise alignment, reliable clamping, and the right height for real-world optics, the Seekins Precision 0.92" Medium-High, 30mm, 4-Cap-Screw Rings deliver. Install with proper torque, confirm your level, and shoot with confidence—day after day.
"The End"
