Seekins Precision Scope Rings — 30mm, AR-High, Matte Black (Model 0010620018 | UPC 811452025097)
Dial in rock-solid alignment and modern AR ergonomics with the Seekins Precision 30mm AR-High Scope Rings. Purpose-built for flat-top AR-pattern rifles, these rings deliver the height you need for a heads-up, natural cheek weld, while their CNC-machined construction, matte black finish, and even clamping pressure help your optic hold zero through recoil, weather, and hard miles. Whether you’re mounting a daylight LPVO or a mid-power variable for crossover hunting/competition, this set brings signature Seekins rigidity and repeatability to your build.
Why These Seekins AR-High Rings Stand Out
AR-Optimized Height: AR-High profile positions your 30mm scope for fast, upright head placement on flat-top receivers—great with plate carriers, ear pro, and modern shooting positions.
Precision CNC Machining: Tight tolerances maintain parallel, concentric bearing surfaces to reduce scope stress and improve tracking consistency.
Even, Secure Clamping: Four cap screws per ring distribute torque more evenly around the tube for a stable, repeatable interface that holds zero.
Matte Black Durability: Low-glare, corrosion-resistant finish stands up to rain, dust, solvents, and heavy range use.
Lightweight Strength: Aluminum construction keeps ounces off your rifle without sacrificing stiffness in rough stages or backcountry hunts.
Field Benefits You’ll Notice
Faster Sight Acquisition: AR-High height helps you stay upright behind the glass, promoting better situational awareness and less neck strain.
Objective & Cap Clearance: Extra vertical room for large objectives, flip caps, and turret housings over rails and handguards (always measure your setup).
Consistent Impact: Quality machining and even clamp force mean fewer POI shifts across temperature swings and round counts.
Ideal Use Cases
LPVO builds (1-6x / 1-8x / 1-10x) on AR-15/AR-10 platforms
General-purpose carbines running 2-10x or 3-15x optics
Hog/Predator night rigs that may share space with clip-ons or top rails
3-Gun/NRL-22 tactical where fast mount and reliable holds matter
Installation Best Practices
Verify unloaded. Remove magazine, lock bolt, and visually/physically clear chamber.
Degrease screws and mating surfaces; apply a removable (blue) threadlocker if recommended.
Mount & square rings on a quality Picatinny/1913 base; snug cross-bolts to spec.
Set eye relief at max magnification; level the reticle with the rifle leveled.
Torque ring caps in an X-pattern to your scope maker’s specification (commonly 15–20 in-lb for 30mm tubes).
Confirm even cap gaps and witness-mark screws; recheck after first range session.
Tip: Over-torque can distort a scope tube and degrade tracking. Use a calibrated inch-pound wrench.
Key Features at a Glance
Tube Diameter: 30mm
Profile: AR-High (heads-up ergonomics on flat-top receivers)
Cap Screws: 4 per ring (even pressure)
Material: Precision-machined aluminum
Finish: Matte black, low-glare, corrosion-resistant
Compatibility: Picatinny/1913 rails and bases (verify your base type)
Model #: 0010620018
UPC: 811452025097
Compatibility & Fit Notes
Works with most 30mm scopes from leading brands; always confirm objective diameter + cap size vs. rail height and handguard clearance.
Suited to AR-15/AR-10 flat-top receivers and chassis systems that prefer a taller optical centerline.
For bolt guns requiring additional height (heavy barrels / tall bolts), AR-High can also be appropriate—measure before ordering.
Care & Maintenance
Inspect and retorque after heavy use, long travel, or big temperature swings.
Keep clamping faces clean and grit-free for consistent friction.
Avoid harsh abrasives on the finish; wipe with a soft cloth after solvent exposure.
Who It’s For
Carbine builders who want fast, heads-up glass on AR platforms.
Precision-minded shooters demanding rigid, repeatable ring alignment.
Hunters & competitors balancing light weight with rock-solid zero retention.
SEO-Friendly Keywords (Use Naturally on Your Product Page)
Seekins Precision scope rings 30mm AR High, matte black 30mm rings, four cap screw scope rings, AR-15 AR-10 30mm mounts, 0010620018, UPC 811452025097, long-range AR scope rings, lightweight precision rifle rings.
Stand up, get behind the glass, and stay on zero with the Seekins Precision 30mm AR-High Scope Rings—matte black durability, precision machining, and confidence you can feel on the clock or in the field.
The End
