Seekins Precision Scope Rings — 35mm, Extra High, Matte Black (Model 0010640006 | UPC 811452025189)
Built for big-tube glass, large objectives, and modern rifle ergonomics, the Seekins Precision 35mm Extra High Scope Rings deliver the clearance and rigidity your setup demands. These Extra High rings in a durable matte black finish are precisely CNC-machined to cradle 35mm main tubes with uniform pressure, using a four-cap-screw design that holds zero through recoil, weather, and hard travel. Whether you’re stacking a 56–60 mm objective over a tall handguard or creating space for clip-on NV/thermal devices, this set provides a clean, repeatable interface for long-range hunting, PRS/NRL competition, and AR-pattern DMR builds.
Why These Seekins 35mm Extra High Rings Stand Out
True 35mm precision: Tight machining tolerances keep bearing surfaces concentric and parallel, reducing scope stress and preserving tracking accuracy.
Extra-High profile for maximum clearance: Creates room for large objectives (50–60 mm), flip caps, sunshades, and clip-on night vision/thermal while clearing handguards and heavy barrel contours.
Even, secure clamping: Four cap screws per ring distribute torque uniformly around the tube to help your optic hold zero in harsh conditions.
Matte black durability: Low-glare, corrosion-resistant finish shrugs off rain, dust, and common solvents and blends with modern chassis and AR receivers.
Strength-to-weight balance: Precision aluminum construction keeps ounces off backcountry rifles without sacrificing stiffness.
Field Benefits You’ll Notice
Stable POI across seasons: Consistent clamping pressure and precision alignment minimize point-of-impact shifts from temperature swings and long shot strings.
Heads-up ergonomics: Extra height pairs naturally with flat-top ARs and chassis rifles with adjustable combs, promoting a comfortable, upright shooting posture.
Accessory friendly: Additional vertical space helps avoid interference with laser/illumination modules, rails, and barricade stops.
Ideal Use Cases
Long-range & ELR hunting: Run high-travel 35mm scopes with big objectives and tall turrets.
PRS/NRL competition: Dependable alignment for constant dialing, positional abuse, and fast transitions.
AR-10/AR-15 DMR builds: Achieve proper eye line over tall handguards and maintain clearance for inline accessories.
Installation Best Practices
Verify unloaded and secure the rifle level in a vise or cradle.
Degrease screws and mating faces; use removable (blue) threadlocker only if recommended by the manufacturer.
Square rings to a Picatinny/1913 base, then snug cross-bolts evenly.
Set eye relief at max magnification and level the reticle with the rifle leveled.
Torque cap screws in an X-pattern to your scope maker’s spec (commonly 15–20 in-lb for many tubes).
Confirm even cap gaps and witness-mark screws; recheck after your first range session and major temperature changes.
Pro tip: Over-torquing can deform a scope tube and compromise tracking. Always use a calibrated inch-pound wrench.
Key Features at a Glance
Tube Diameter: 35mm
Profile: Extra High (for large-objective & accessory clearance)
Cap Screws: 4 per ring for even clamping pressure
Material: Precision-machined aluminum
Finish: Matte black, low-glare, corrosion-resistant
Interface: Fits Picatinny/1913 bases and rails (verify base type)
Model #: 0010640006
UPC: 811452025189
Compatibility & Fit Notes
Excellent for 35mm optics from leading brands; always verify objective diameter + flip-cap size + rail height against barrel/handguard clearance.
Works on bolt guns and AR-pattern rifles; especially helpful with clip-on NV/thermal or tall handguards.
Care & Maintenance
Inspect & re-torque after heavy use, long travel, or big temperature swings.
Keep clamping faces clean and grit-free.
Wipe with a soft cloth after solvent exposure; avoid abrasive pads on the finish.
Who It’s For
Precision shooters who demand repeatable alignment and zero retention.
Backcountry hunters running large-objective 35mm glass with minimal weight penalty.
AR builders seeking a higher optical centerline for comfort and accessory clearance.
SEO-Friendly Keywords (Use Naturally on Your Product Page)
Seekins Precision 35mm extra high scope rings, matte black 35mm rings, four cap screw scope rings, 56mm objective clearance rings, PRS NRL scope rings, AR-10 AR-15 35mm extra high rings, model 0010640006, UPC 811452025189, precision rifle scope mounts.
Lock in your glass with confidence—the Seekins Precision 35mm Extra High Scope Rings deliver true alignment, maximum clearance, and a durable matte black finish built for hunts, matches, and miles.
The End
