Seekins Precision Scope Rings — 35mm Tube, Low Height — Matte Black — 0010640002 (UPC: 811452025165)
Lock in modern optics with the Seekins Precision 35mm Low Scope Rings in matte black. Purpose-built for today’s large-objective tactical and hunting scopes, these rings deliver rock-solid alignment, repeatable zero, and a clean, snag-free profile. Whether you’re building a do-everything crossover rifle or a dedicated long-range rig, Seekins’ meticulous machining, hard-use finish, and duty-grade hardware make these rings a trustworthy foundation for your glass.
Why These Rings
35mm tube strength: Maximize internal adjustment range and optical performance on premium 35mm scopes used for long-range, PRS, and crossover hunting.
Low height profile: Keep the optic closer to the bore for improved cheek weld, faster target acquisition, and a more natural shooting position.
Matte black, hard-use finish: Non-reflective exterior resists wear and blends seamlessly with Cerakote and factory receivers.
Precision machining: Coaxial ring bores help protect the scope tube from stress and reduce the need for lapping.
Picatinny compatibility: Cross-bolt interface designed for MIL-STD-1913 Picatinny bases/rails used on most precision rifles.
At a Glance
Brand: Seekins Precision
Product: Scope Rings (pair)
Tube Size: 35mm
Height: Low
Color/Finish: Matte Black
Interface: Picatinny (MIL-STD-1913)
Part #: 0010640002
UPC: 811452025165
Key Features & Benefits
Built for Zero, Built to Last
Seekins rings are engineered for repeatable alignment through travel, temperature swings, and recoil. The robust cross-bolt design anchors your optic to the rail, resisting shift during high-round-count sessions and rough backcountry hunts.
Optimized Ergonomics
The low height places your scope closer to the bore, helping you achieve a consistent cheek weld—crucial for faster, more precise shot execution and better recoil management in awkward field positions.
Clean, Non-Reflective Aesthetic
A matte black finish reduces glare when you’re glassing in bright conditions and blends with modern actions, rails, and mounts for a professional, cohesive look.
Purpose-Driven Hardware
Even clamping across the cap screws promotes uniform pressure on your optic tube, supporting long-term tracking integrity and protecting your investment in top-tier glass.
Ideal Use Cases
Long-range & NRL/PRS practice: Consistent tracking and return-to-zero on precision rifles.
Western big-game & mountain hunts: Lightweight reliability that won’t quit when weather turns ugly.
Crossover “hunt/comp” rigs: One ring set that’s rugged enough for backcountry and precise enough for steel.
Fit & Compatibility
Rails/Bases: Designed for MIL-STD-1913 Picatinny rails/bases.
Scopes: Any 35mm main-tube scope (verify objective diameter and cap clearance with your rail/contour).
Rifle platforms: Works with most bolt-action and chassis rifles that use Picatinny scope bases.
Setup Tips (Best Practices)
Prep surfaces: Degrease ring screws and rail threads; seat the rings on the rail before final spacing.
Set eye relief & level: Establish natural eye box at your shooting position, then level the reticle.
Torque to spec: Tighten base and cap screws to manufacturer-recommended inch-pounds in a cross pattern.
Confirm clearance: Check bolt handle and ocular clearance and verify objective/barrel gap with your preferred caps or sunshade.
Re-check after first session: Verify torque after the first range trip and after air travel or major temperature swings.
Pro Tip: Start with your scope’s magnification at mid-range when setting eye relief; it helps balance field use across low and high power.
Care & Maintenance
Wipe with a soft cloth after wet or dusty days; avoid harsh abrasives.
Keep cross slots free of grit so the cross-bolt clamps uniformly.
Reconfirm fastener torque periodically for maximum confidence.
Frequently Asked Questions
Will “Low” height clear a 56 mm objective?
It depends on your rail height, barrel contour, and scope’s outer objective diameter (not just nominal size). Measure and choose ring height to maintain a small, safe gap above the barrel.
Do I need to lap these rings?
Seekins rings are precision-machined to minimize the need for lapping. Most users do not lap; if you choose to, use minimal compound and proper tools.
Are these rings for Weaver rails?
They’re designed for Picatinny (MIL-STD-1913). Some Weaver rails work, but true Picatinny is recommended for optimal fit.
What torque values should I use?
Follow Seekins Precision’s published inch-pound specs for base and cap screws—do not over-torque.
Specifications
Safety Notice: Ensure the firearm is unloaded before mounting optics. Follow the ring and scope manufacturer’s instructions, and confirm zero at the range before field use.
SEO Highlights (Quick Scan)
Seekins Precision 35mm low scope rings
Matte black finish, Picatinny interface
Lightweight, precision-machined, repeatable zero
Part 0010640002, UPC 811452025165
Meta (for SEO)
Meta Title: Seekins Precision Scope Rings — 35mm Low, Matte Black, Picatinny — 0010640002, UPC 811452025165
Meta Description: Secure your 35mm scope with Seekins Precision low rings in matte black. Picatinny compatible, precision-machined for alignment and repeatable zero. Part 0010640002, UPC 811452025165.
The End
