SilencerCo Salvo 12 Choke Mount Adapter — Mossberg 500, Improved Cylinder (IC)

Model: AC872 • UPC: 817272011920 • Platform: Mossberg 500 (Accu-Choke) • Type: Salvo 12 Choke Mount Adapter • Constriction: Improved Cylinder

Mount your Salvo with confidence. The SilencerCo Salvo 12 Mossberg 500 Choke Mount Adapter (AC872) brings the proven Salvo modular shotgun suppressor system to popular Mossberg 500 platforms that use Accu-Choke threading. Cut for Improved Cylinder constriction, this adapter provides the correct interface and shoulder alignment for secure suppressor installation, while preserving pattern consistency and point of impact. If you’re building a quiet, recoil-tamed shotgun for range, training, or hunting where legal, AC872 is the must-have link between your Mossberg and the Salvo 12.

Why Choose the AC872 Choke Mount Adapter

• Purpose-Built for Mossberg 500 (Accu-Choke): Thread spec and shoulder geometry match Mossberg 500 barrels that accept Accu-Choke tubes for a precise fit.

• Improved Cylinder Constriction: A versatile choke profile that pairs well with the Salvo 12 across common shot sizes and real-world distances.*

• Secure, Repeatable Mounting: Creates the correct interface for Salvo 12 attachment so the suppressor seats squarely and returns to zero when removed and reinstalled.

• Maintain Pattern Integrity: Proper bore alignment helps support even pellet distribution and predictable POI with compatible loads.

• Durable, Range-Ready Construction: Built to withstand repetitive install/remove cycles, recoil, and heat typical of shotgun strings.

*Always pattern your shotgun after any choke or suppressor change to verify POI and pellet density with your chosen load.

Key Features at a Glance

• Compatibility: Mossberg 500 barrels threaded for Accu-Choke

• Suppressor Interface: SilencerCo Salvo 12

• Choke Constriction: Improved Cylinder (IC)

• Material/Finish: Precision-machined steel with protective finish (spec varies by batch)

• Application: Hunting (where legal), training, and range use with the Salvo 12

Who It’s For

• Salvo 12 Owners who want a rock-solid mount on Mossberg 500 platforms.

• Hunters & Instructors seeking reduced muzzle report and softer recoil impulse (observe all local regulations).

• Pattern-Focused Shooters who want consistent, repeatable alignment after cleaning or transport.

Installation Overview (Best Practices)

1. Verify Fitment: Confirm your barrel is Mossberg Accu-Choke threaded and in good condition.

2. Clean & Degrease: Thoroughly clean barrel threads; ensure no carbon, shot wad, or debris remains.

3. Install Adapter: Lightly oil threads and hand-tighten the AC872 like a choke tube; snug to manufacturer guidance.

4. Attach Salvo 12: Per SilencerCo instructions, mount and torque/clock the suppressor as required by the chosen rod kit/length.

5. Pattern & Confirm: Test with your typical loads at hunting/practice distances. Re-check snugness after initial strings.

If you’re unfamiliar with choke/suppressor installation, have a qualified gunsmith confirm proper fit and alignment.

Compatibility Notes

• Designed for: Mossberg 500 Accu-Choke barrels.

• Not for: Non-Accu-Choke systems (e.g., Rem Choke, Invector, Tru-Choke, etc.). Use the specific Salvo mount that matches your barrel’s thread pattern.

• Ammunition: Follow SilencerCo guidelines. Do not fire slugs through choke constrictions not rated for slugs. Confirm shot size and wad compatibility for use with the Salvo 12.

Safety, Legal & Compliance

• Know Your Laws: Suppressors are regulated devices. Possession and use require compliance with federal, state, and local regulations (e.g., NFA rules in the U.S.).

• Use as Intended: Only install the AC872 with the SilencerCo Salvo 12 on compatible barrels.

• Routine Checks: Inspect alignment, choke tightness, and suppressor security before firing. Discontinue use if you observe baffle/contact marks or abnormal POI shift.

Care & Maintenance

• After Wet Hunts/Range Days: Remove the suppressor per instructions, allow components to cool, and wipe moisture from the adapter and muzzle.

• Thread Care: Apply a light film of choke-safe oil; avoid thread contamination with grit.

• Periodic Inspection: Check for carbon buildup on the adapter face/shoulder; clean with a nylon brush and appropriate solvent.

Technical Specifications

• Brand: SilencerCo

• Product: Salvo 12 Choke Mount Adapter

• Model: AC872

• UPC: 817272011920

• Platform: Mossberg 500 (Accu-Choke)

• Choke Constriction: Improved Cylinder

• Interface: Salvo 12 suppressor system

(Specifications may vary slightly by production lot. Always follow the latest SilencerCo instructions.)

What’s in the Box

• SilencerCo Salvo 12 Choke Mount Adapter — AC872 (Improved Cylinder, Mossberg 500)

• Basic instruction/fitment information (packaging may vary)

SEO-Optimized Keywords & Phrases

SilencerCo Salvo 12 Mossberg 500 adapter, AC872 Improved Cylinder, Salvo 12 choke mount Accu-Choke, Mossberg 500 IC choke for Salvo, shotgun suppressor mount Mossberg, SilencerCo AC872 817272011920, Salvo 12 Mossberg choke adapter, Improved Cylinder Salvo mount.

Short Meta Description

SilencerCo AC872 Salvo 12 Choke Mount Adapter—Improved Cylinder for Mossberg 500 (Accu-Choke) barrels. Provides a secure, aligned interface for the Salvo 12 suppressor. UPC: 817272011920.

Buyer’s Quick Checklist

• ✅ Mossberg 500 barrel with Accu-Choke threads

• ✅ Using a SilencerCo Salvo 12 suppressor

• ✅ Want Improved Cylinder constriction

• ✅ Understand suppressor laws and safe installation practices

Build a quieter, better-balanced shotgun the right way—pair your Mossberg 500 with the SilencerCo Salvo 12 Choke Mount Adapter (AC872) for secure mounting, repeatable alignment, and confidence in the blind or on the range.
The End