Slide Plate Cover – Replacement Rear Slide Back Plate for Pistol Slides (SKU 100002684)
Refresh your pistol’s slide with a clean, durable Slide Plate Cover (SKU 100002684). Designed as a direct-replacement rear slide back plate, this small-but-critical component helps retain internal slide assemblies while adding a crisp, upgraded look. Whether you’re restoring a range workhorse, completing a slide build, or replacing a worn factory plate, this cover offers secure fitment, smooth edges, and a durable finish suited for everyday carry and high-volume range use.
From quick cosmetic refreshes to routine maintenance, the Slide Plate Cover 100002684 delivers the reliability and clean aesthetics enthusiasts expect—at a value that makes sense.
Why Choose the Slide Plate Cover 100002684?
Direct-Replacement Fit
Built to the dimensions of a standard rear slide back plate, it’s engineered to drop into compatible pistol slides and restore proper retention of internal slide components. (Verify fit for your exact slide/pistol model.)
Durable Construction
Crafted from robust material (commonly anodized aluminum or high-strength polymer depending on production run) with a wear-resistant finish to handle routine racking, holster contact, and cleaning solvents.
Clean, Low-Profile Design
Smooth, dehorned edges and a low-snag profile support comfortable EDC and efficient manipulations without catching gloves or clothing.
Easy Install
With basic bench tools and safe handling practices, most users can replace the back plate in minutes. (See the high-level installation steps below.)
Budget-Friendly Upgrade
Restore factory function or achieve a clean, custom look without breaking the bank.
Key Features at a Glance
Product Type: Rear slide back plate / slide plate cover
SKU: 100002684
Function: Retains internal slide components and provides a finished rear face on the slide
Profile: Low-snag, dehorned perimeter for comfortable carry and racking
Finish: Wear-resistant, cleaning-solvent friendly (varies by production run)
Use Case: EDC pistols, training guns, slide builds, factory refurb/refresh
Compatibility Note: Pistol slide back plates are model-specific. Before purchase, verify compatibility with your exact slide/pistol generation, caliber, and extractor/striker channel design. If you’re unsure, consult a qualified armorer or reference your manufacturer’s schematic.
Installation Overview (High-Level)
Unload & Clear
Remove magazine, lock slide to the rear, visually and physically verify an empty chamber. Work on a clear bench.
Field Strip
Disassemble per your pistol’s manual until you have the slide separated from the frame.
Depress Internal Retainers
Using a small armorer’s pick or punch, carefully depress the striker assembly spacer sleeve or extractor depressor plunger (varies by model) while sliding the old back plate downward.
Install the New Plate
Keep internal components depressed and slide the new cover upward into the dovetail until it locks flush. Ensure everything seats fully.
Function Check
Reassemble. Rack the slide repeatedly, dry function check the safety features, and confirm the striker/extractor move freely. Only return to live fire once you’re satisfied with fitment.
Tip: Work inside a bench tray to catch small springs/plungers and avoid parts loss.
Who It’s For
Everyday Carriers seeking a refreshed, low-snag rear slide face.
Range Enthusiasts replacing worn factory plates after heavy use.
Slide Builders & Armorers completing OEM-spec or custom-configured slides.
Departments & Clubs standardizing maintenance across multiple pistols.
Care & Maintenance
Routine Wipe-Down: Clean the rear slide face during regular maintenance; remove carbon and debris around the striker channel/extractor plunger.
Solvent Awareness: Most common gun-care solvents are compatible; avoid harsh industrial chemicals not intended for firearms.
Periodic Inspection: Check for flush fit, cracks, or excessive wear—especially on high-round-count training guns.
Frequently Asked Questions
Q: Will SKU 100002684 fit my pistol?
A: Slide plate covers are model- and generation-specific. Check your owner’s manual or parts schematic, or ask an armorer to confirm this SKU’s compatibility with your slide.
Q: Is any fitting required?
A: Typically drop-in. Tolerance stacking or aftermarket slide internals may require minor fitting by a qualified armorer.
Q: Polymer or aluminum?
A: This SKU is offered with durable, wear-resistant construction; specific material may vary by production batch (high-strength polymer or anodized aluminum). The finish is designed to withstand normal carry and cleaning.
Q: Can I install it myself?
A: Many owners do with proper tools and safety procedures. If you’re unfamiliar with striker/extractor assemblies, consult a gunsmith/armorer.
Q: Does it change reliability?
A: A correctly installed plate maintains factory function by securely retaining internal slide components.
SEO Highlights (Quick Scan)
Slide Plate Cover 100002684 – rear slide back plate replacement
Low-profile, dehorned design for EDC comfort and smooth manipulations
Wear-resistant finish, solvent-friendly maintenance
Direct-replacement part for compatible pistol slides (verify model/gen)
Ideal for repairs, slide builds, and factory refresh
The Bottom Line
Small part, big payoff. The Slide Plate Cover (SKU 100002684) restores a clean, secure rear slide face while retaining critical internal components—exactly what you want for dependable EDC, range practice, and long-term durability. Verify compatibility with your specific pistol, install with care, and enjoy a factory-fresh finish that’s built for the daily grind.
The End
