The Speer Hot-Cor 30Cal 180gr Spitzer Soft Point – Part #2053, 100 Per Box/5 Case, UPC 076683020536 is a .30-caliber rifle bullet component engineered for reloaders who require consistent long-range accuracy and dependable big-game terminal performance. Built around Speer’s proven Hot-Cor® construction, this 180-grain Spitzer Soft Point (SSP) projectile is designed for a wide range of .30-caliber hunting cartridges that use .308" diameter bullets. Speer+2Palmetto State Armory+2
Important: This product is reloading bullets only (projectiles). It is not loaded ammunition and must be assembled into cartridges using appropriate brass, powder, and primers in accordance with reputable, pressure-tested load data. Speer+1
Caliber, Weight, and Core Specifications
The Speer Hot-Cor 2053 bullet is dimensioned for standard .30-caliber rifle platforms:
This 180-grain weight is a classic choice in .30-caliber hunting bullets, delivering a balance of sectional density, energy, and recoil suitable for medium- and large-game applications.
Hot-Cor® Construction and Jacket Design
Speer’s Hot-Cor® process is a key differentiator of this bullet line. Instead of pressing a cold lead slug into the jacket, Speer pours molten lead into the jacket during construction. This reduces voids and oxidation between the core and jacket and helps minimize core–jacket separation. Speer+2Elevated Arms LLC+2
Construction highlights:
Core process: Hot-Cor® molten lead process for improved internal consistency and strong mechanical bond between core and jacket. Speer+1
Jacket material: Brass/copper alloy jacket, often listed simply as “brass jacket.” Palmetto State Armory+1
Intended usage: Designed for big game hunting with consistent terminal performance across a range of impact velocities. Speer+2Palmetto State Armory+2
The result is a bullet that is engineered to expand reliably while maintaining sufficient structural integrity to penetrate vital organs on medium and large game animals.
Spitzer Soft Point Geometry
The Spitzer Soft Point profile combines aerodynamic efficiency with controlled expansion:
Spitzer (pointed) nose: Reduces drag to maintain velocity and energy at extended ranges and to produce flatter trajectories than flat-nose or round-nose profiles. Speer+2Palmetto State Armory+2
Exposed soft lead tip: Initiates expansion on impact, with the Hot-Cor bond helping to prevent excessive fragmentation and promote deep penetration. Speer+1
This design is particularly well-suited for classic .30-caliber hunting cartridges used in open country or mixed terrain where shots may vary from moderate to longer distances.
Ballistic Characteristics: BC, Sectional Density, and Length
Speer publishes full ballistic parameters for the 2053 Hot-Cor bullet, enabling reloaders to plug accurate data into ballistic calculators: Speer+2Palmetto State Armory+2
The relatively high BC for a 180-grain .308" soft point supports:
Good wind resistance
Retention of downrange velocity and energy
Predictable trajectory curves for hunting ranges where ethical shots may extend several hundred yards, depending on cartridge and load selection.
The SD of 0.271 contributes to deep penetration, particularly important on larger-bodied game where bullets must traverse muscle and bone before reaching vital organs.
Typical Cartridges and Applications
While the Speer Hot-Cor 2053 is a component bullet and not tied to any single cartridge, it is commonly used in .30-caliber big-game hunting loads such as:
According to Speer, this bullet is intended for:
Usage: Big Game (deer, elk, mule deer, black bear, and similar-sized animals, subject to local regulations and shot placement). Speer+2Palmetto State Armory+2
As always, hunters must ensure they are using loads that deliver impact velocities within the bullet’s effective operating range and that they follow all local laws and ethical guidelines.
Reloading Considerations
Because this is a standalone projectile, proper reloading practice is essential:
Load data: Use Speer’s official reloading data or other reputable, pressure-tested sources to determine safe starting and maximum powder charges for your chosen cartridge. Speer+1
Seating depth & COAL: Observe recommended cartridge overall length (COAL) guidelines for your specific rifle chamber and magazine. The 1.165" bullet length is a useful reference when determining seating depth. Speer+1
Crimping: If recommended by the load data—especially in heavy-recoiling rifles or cartridges used in magazine-fed systems—apply an appropriate crimp to maintain bullet position under recoil.
Standard reloading best practices apply: inspect brass, work up loads gradually, and monitor for pressure signs at each step.
Packaging, Handling, and Storage
Retail and manufacturer information confirms the following packaging details:
The compact 100-count box size is suitable for both initial load development and full-season hunting load production. Proper storage in a cool, dry place helps maintain bullet jacket and core integrity over time.
Technical Identification and SEO-Focused Catalog Data
For online listings, inventory systems, and search engine optimization, this bullet can be described with the following standardized details:
Including these data points in product titles, bullet point features, and meta descriptions helps ensure accurate search results for terms like “Speer 2053 Hot-Cor 30 cal 180gr SSP,” “Hot-Cor 180 grain .308 hunting bullet,” or for the specific UPC 076683020536.
In summary, the Speer Hot-Cor 30Cal 180gr Spitzer Soft Point 100 Per Box/5 Case (Part #2053, UPC 076683020536) is a .308" diameter, 180-grain hunting bullet utilizing Speer’s Hot-Cor molten-core construction to deliver reliable all-range accuracy, controlled expansion, and deep penetration on big game. Its spitzer soft point geometry, high sectional density, and solid ballistic coefficient make it a versatile option for reloaders building .30-caliber hunting loads for cartridges such as .30-06 Springfield, .308 Winchester, and similar big-game rifle platforms. Georgia Guns & Ammo+3Speer+3Palmetto State Armory+3
The End
