Steiner Anti-Reflective Device (ARD) – 50mm, OD Green (Model 750 | UPC 381807502)
Cut glare, keep clarity. The Steiner Anti-Reflective Device (ARD) 50mm in OD Green is a lightweight, honeycomb-style shield that dramatically reduces reflective flash off your objective lens—so your optic stays discreet in bright sun, open terrain, or against camera/observer angles. Purpose-built for 50mm objective lenses, this ARD helps preserve image quality while minimizing the front-facing signature that can give away your position on the hunt, on the range, or in the field.
Engineered with the toughness you expect from Steiner, the ARD adds a practical layer of protection for your scope’s objective glass while maintaining excellent light transmission. The natural OD Green exterior blends with field gear and foliage for a low-profile look that’s right at home in woodland, grassland, and mixed environments.
Why Choose a Steiner ARD for Your 50mm Optic?
Anti-Glint Honeycomb Matrix: Precision cells break up incoming light and cut the mirror-like reflection that can reveal your location—without excessive dimming.
Optimized for 50mm Objectives: Sized to fit scopes with 50mm objective lenses (Steiner and many other optics using compatible fitment).
Maintain Clarity & Contrast: Purpose-built to minimize reflection while helping preserve edge-to-edge detail and color fidelity.
Field-Ready OD Green: Non-reflective, OD Green finish reduces visual signature and pairs with most modern camo patterns.
Lens Protection: Adds a sacrificial barrier that helps shield the objective from dust, brush, and light impact.
Lightweight & Low-Profile: Slim design won’t upset rifle balance and slides into scabbards and soft cases with ease.
Key Specs at a Glance
Product: Steiner Anti-Reflective Device (ARD)
Objective Size: 50mm
Color: OD Green (matte, low-sheen)
Model/Part #: 750
UPC: 381807502
Style: Honeycomb / killflash-style anti-reflection grid
Use Cases: Hunting, competition, predator control, field observation, training
Note: Always verify thread/fitment for your specific optic. Many 50mm Steiner scopes and other 50mm objective lenses accept ARDs of this size, but housing designs can vary.
Performance Benefits
Reduced Front-Facing Signature
Bright sun or angled light can bounce off objective glass like a beacon. The ARD’s honeycomb pattern breaks up and absorbs those reflections, so you stay less noticeable to both wildlife and observers.
Smart Light Management
While reducing reflection, the design also aims to maintain generous light transmission for usable brightness at dawn and dusk—the times when performance matters most.
Rugged Everyday Protection
Brush, dust, and wind-driven grit happen. The ARD provides extra insurance for your objective lens in rough country and during transport.
Ideal Scenarios
Waterfowl & Big-Game Hunts: Keep optics discreet when glassing across open flats, marsh edges, or alpine basins.
Predator & Varmint Control: Reduce glint that might spook wary animals at long distances.
Precision & Match Shooting: Manage glare on exposed barricades and sunny stages.
Observation & Training: Maintain professional presentation with a non-flashy objective.
Installation Tips (Quick Start)
Verify Fit: Confirm your scope has a compatible 50mm objective housing.
Clean the Bezel: Wipe the objective rim and lens area to remove dust or oils.
Attach the ARD: Install per your scope’s interface (thread-in or compatible cap system depending on your optic model).
Check Focus & Zero: After installation, confirm point of impact and edge clarity—especially for long-range setups.
Care & Maintenance
Keep It Clean: Blow out dust from the honeycomb cells; gently brush or rinse if debris accumulates.
Avoid Harsh Solvents: Use lens-safe cleaners on surrounding glass and mild soap/water on the ARD if needed.
Inspect Regularly: Look for deformation or impact damage after hard field days.
Frequently Asked Questions
Q: Will an ARD darken my sight picture?
A: Any anti-reflective grid can reduce perceived brightness slightly, but Steiner’s honeycomb design is engineered to minimize dimming while cutting glare and flash.
Q: Does it affect point of impact?
A: It shouldn’t. Still, it’s good practice to confirm zero after adding any accessory to your optic.
Q: Is 50mm the only size available?
A: This listing is for 50mm. Steiner produces ARDs for other objective sizes—choose the one that matches your scope.
Q: Can I stack this with a flip-up cover?
A: Many users do. Compatibility depends on your scope’s bezel and cover design—verify clearances before field use.
SEO Highlights (Quick Scan)
Steiner Anti-Reflective Device 50mm OD Green
Honeycomb killflash-style ARD reduces scope glare and signature
Model 750, UPC 381807502
Fits 50mm objective scopes (Steiner and other compatible optics)
Lightweight, protective, and field-ready
The Bottom Line
Discretion and clarity aren’t mutually exclusive. The Steiner ARD 50mm in OD Green (Model 750) delivers both—suppressing telltale reflections while protecting your objective lens and preserving a bright, crisp view. If you rely on your glass in demanding conditions, this is a simple, high-value upgrade you’ll notice the first time the sun hits your scope.
The End
