Steiner T-Series Rings — 30mm High, Matte Black Aluminum (Model 5962, UPC 000381859624)
Lock down your optic with confidence. Steiner T-Series Rings (High, 30mm, Matte Black) deliver a rugged, lightweight, repeatable mount trusted by precision shooters, law-enforcement professionals, and serious hunters. Machined from premium aluminum and finished in a non-reflective matte black, these rings pair perfectly with modern LPVOs and precision scopes, giving you the height, stability, and alignment your build demands.
Why Choose Steiner T-Series Rings
Steiner designed the T-Series to maintain precise zero under recoil while keeping weight to a minimum. The 30mm tube, High height profile is ideal for rifles that need additional scope-to-barrel clearance for larger objectives, bolt handles, or night-vision/thermal clip-ons. With beefy cross-bolt clamping and exacting tolerances, these rings provide rock-solid engagement on MIL-STD Picatinny rails without chewing them up.
Key Features at a Glance
Tube Size: 30mm — compatible with a wide range of tactical and hunting optics
Height: High — generous clearance for larger objective lenses and accessorized forends
Material: Precision-machined aluminum for strength with minimal weight
Finish: Matte black — low-glare, corrosion-resistant, duty-ready
Interface: Picatinny (MIL-STD) cross-bolt clamping for secure rail engagement
Consistency: Tight concentricity and parallelism for true scope alignment
Installation: Robust hardware and straightforward torque procedure for repeatable mounting
Model / UPC: 5962 / 000381859624
Built for Precision and Durability
Every detail in the T-Series is engineered to protect your zero and your optic:
Exact Bore Alignment: Minimizes stress on your scope tube, improves tracking, and preserves turret integrity.
Maximized Surface Contact: Broad clamping area spreads load evenly to resist shift under recoil and hard use.
Optimized Wall Thickness: Adds stiffness where it counts while keeping overall weight field-friendly.
Matte Hardcoat: Guards against abrasion, weather, and solvents used in routine maintenance.
Ideal Applications
AR-Pattern Rifles: High 30mm rings deliver proper cheek weld and optic height on flat-top receivers.
Precision Bolt Guns: Enough clearance for 40–50mm objectives (and many 56mm with appropriate rail geometry), plus room for caps and lens covers.
Night & Thermal Pairing: Extra height helps accommodate clip-on devices in front of your day optic.
Competition & Duty: Track impacts and hold zero through strings of fire, barricade work, and transport.
Installation Tips (Best Practices)
Degrease rail, screws, and ring caps; lightly oil screw threads afterward if recommended by your torque specs.
Set Eye Relief: Place the scope, establish a full field of view at max magnification, then lightly snug bases.
Level the Reticle: Use a reliable leveling tool; ensure rifle and optic are both plumb.
Torque Evenly: Tighten cap screws in an X-pattern to manufacturer-recommended inch-pounds; verify final rail cross-bolt torque.
Witness Mark: Add a subtle paint pen mark to screws to monitor any shift over time.
Specifications
Brand / Series: Steiner T-Series Rings
Part Number: 5962
UPC: 000381859624
Tube Diameter: 30mm
Height: High
Material: Aluminum (precision machined)
Finish: Matte Black
Rail Compatibility: Picatinny
Use Case: Tactical, precision, hunting
SEO Metadata (Merchant-Ready)
SEO Title: Steiner T-Series Rings 30mm High — Matte Black Aluminum Scope Rings (5962)
Meta Description (≤160 chars): Lightweight, rugged Steiner T-Series 30mm High rings. Matte black aluminum, precise alignment, Picatinny ready. Model 5962, UPC 000381859624.
Target Keywords: Steiner T-Series rings, 30mm high scope rings, matte black aluminum rings, 5962, Picatinny scope mounts, precision scope rings, lightweight 30mm rings
FAQ
Q: Will these rings fit my 30mm scope?
A: Yes—these are designed specifically for 30mm tubes. Check your objective size and rail height to confirm “High” is the right clearance for your setup.
Q: Are they compatible with Weaver rails?
A: They’re optimized for Picatinny rails. Some Weaver rails may fit, but Picatinny is recommended for best engagement.
Q: What torque should I use?
A: Follow your scope manufacturer’s and Steiner’s torque guidelines (typically measured in inch-pounds). Tighten cap screws in a cross pattern and verify zero after initial range session.
Q: Will the matte finish hold up to field use?
A: Yes—the matte black hardcoat resists glare, abrasion, and common gun-care chemicals, designed for duty and hunting environments.
Q: Is lapping required?
A: With quality machining and proper alignment, lapping is generally not necessary. If you observe ring marks or binding, reassess alignment and torque before considering lapping.
Elevate your optic mounting with Steiner T-Series Rings 30mm High (5962)—a smart blend of lightweight build, robust clamping, and precision alignment that protects your scope and your zero through every shot.
The End
