Strike Industries Angle Grip w/ Cable Management System – Picatinny – Black (SI-AR-CMS-PSAF-BK / ARCMSPSAFBK)

Clean up your rail, lock in your grip, and route light/laser leads like a pro. The Strike Industries Angle Grip with Cable Management System (CMS) for Picatinny/M1913 rails delivers rock-solid control in a low-profile, ergonomic package—while its built-in channels hide and protect pressure-switch wires. Purpose-built for modern carbines and PCCs, SI-AR-CMS-PSAF-BK (ARCMSPSAFBK) keeps your support hand comfortable and your accessories snag-free for faster target transitions, better recoil management, and a cleaner overall setup.

Why CMS? Exposed wires snag, wear out, and look messy. Strike Industries’ integrated cable channels route your leads forward, back, left, or right, protecting them from heat and obstacles and keeping your switch exactly where you want it.

Key Benefits

• Improved control & consistency: Angled geometry supports a natural wrist angle, reducing fatigue and helping you drive the muzzle during rapid strings.

• Integrated cable management: Molded channels and pass-throughs neatly route wires for weapon lights and lasers—no more zip ties or tape.

• Snag-resistant, low profile: Streamlined exterior reduces bulk so your rifle moves cleanly through slings, barricades, and vehicle interiors.

• Ambidextrous by design: Symmetrical shape and multiple routing options work for right- and left-handed shooters.

• Lightweight & durable: Reinforced polymer construction keeps ounces off the front of the gun while standing up to field use.

• Fast, secure installation: Clamps directly to Picatinny/M1913 rails with included hardware for a tight, repeatable fit.

Feature Highlights

• Angled Fore Grip (AFG) ergonomics: Encourages a thumb-over-bore or C-clamp hold for superior recoil control and tracking.

• Cable channels (multi-directional): Route leads inboard/outboard or forward/back; tuck extra length inside the grip cavity for a tidy finish.

• Textured contact surfaces: Traction where you need it—confident handling with sweaty or gloved hands.

• Compact footprint: Leaves rail space for other accessories and works well with barricade stops and bipods.

• Picatinny-specific mount: Purpose-built for 1913 rails on handguards, SMGs/PCCs, and select shotgun platforms.

Ideal Use Cases

• Duty & defensive carbines: Secure grip + protected cable runs for pressure-pad lights/lasers.

• Competition & training: Faster transitions and better recoil control with fewer cable snags under the clock.

• Overland & home-defense builds: Keep setups compact, reliable, and easy to maintain.

• PCC/SMG platforms: Short rails benefit from CMS routing to prevent exposed wire loops.

Installation (Quick Start)

1. Unload & clear your firearm.

2. Place the Angle Grip CMS onto the Picatinny rail at your preferred position.

3. Tighten the clamp screws evenly (follow Strike Industries’ torque guidance).

4. Route cables through the built-in CMS channels; confirm full travel of the charging handle and no sling interference.

5. Function check your light/laser and ensure switch activation is natural from your shooting grip.

Pro tip: After your first range session, re-check hardware torque and inspect the routing for abrasion hot spots.

Compatibility Notes

• Rails: Fits Picatinny/M1913 only (not M-LOK®/KeyMod®).

• Switches & leads: Compatible with most common pressure-pad cables for weapon lights and laser aiming modules.

• Clearance: Ensure adequate space between the grip and any hand stop, bipod, or vertical foregrip you run.

Specs (At-a-Glance)

• Brand: Strike Industries

• Product: Angle Grip with Cable Management System (Picatinny)

• Color: Black

• Mount Type: Picatinny/M1913 clamp-on

• Material: Reinforced polymer (hardware included)

• Model / SKU: SI-AR-CMS-PSAF-BK

• Alt SKU: ARCMSPSAFBK

• Use Case: Control enhancement + cable routing for lights/lasers

Dimensions, weight, and exact hardware may vary by production run. Refer to the included manual for definitive specs and torque values.

Care & Maintenance

• Inspect periodically: Check screws and the cable channels for wear; re-torque after high round counts.

• Clean easily: Wipe with mild soap/water; avoid harsh solvents that can degrade polymer.

• Heat awareness: Keep cables routed away from gas ports and hot barrel segments where possible.

Responsible Use & Compliance

• Know your laws: Verify local/state regulations on foregrips and firearm configurations.

• Safe handling: Follow the four rules; confirm light/laser zero after any accessory changes.

• Holistic setup: Pair with quality sling mounts and rail covers for maximum comfort and control.

Who It’s For

• Enthusiasts & competitors wanting a cleaner, faster front end.

• LEO/defensive users needing dependable cable protection in duty environments.

• Builders & armorers standardizing clean cable routing across multiple carbines.

SEO Highlights (Quick Scan)

• Strike Industries Angle Grip with Cable Management System (CMS)

• Picatinny/M1913 mount, black, ergonomic AFG design

• Integrated wire routing for weapon light/laser pressure switches

• SI-AR-CMS-PSAF-BK / ARCMSPSAFBK – lightweight, ambidextrous, snag-resistant

Suggested Meta Title

Strike Industries Angle Grip w/ Cable Management System – Picatinny, Black | SI-AR-CMS-PSAF-BK (ARCMSPSAFBK)

Suggested Meta Description

Streamline your rail with the Strike Industries Angle Grip CMS for Picatinny. Ergonomic control plus integrated cable routing for light/laser pressure switches. Black, lightweight, ambidextrous. SI-AR-CMS-PSAF-BK.

The End