Strike Industries Safety (Enhanced) — Compatible with Benelli® M1/M2/M3/M4 — 12/20 Gauge — Black 4140 Steel — BM2SB12 — UPC 793811766363
Run your Benelli faster, safer, and more confidently. The Strike Industries Safety (Enhanced) for Benelli M1/M2/M3/M4 shotguns gives you a tactile, easy-to-reach control that improves on the tiny, low-profile factory button. Precision-machined from 4140 steel and finished in low-glare black, Model BM2SB12 (UPC 793811766363) is designed for 12- and 20-gauge platforms and shaped to deliver positive engagement—whether you’re wearing gloves on a cold range day or swapping shoulders around barricades.
Why upgrade the safety? A larger, ergonomic safety with crisp detent feel helps you confirm status by touch, reduces fumbles under stress, and supports faster manipulations in home defense, duty, and competition.
Key Benefits
Instant tactile indexing: Enhanced geometry and a textured contact surface make it easy to find and press the safety without breaking your firing grip.
Glove-friendly control: Generous surface area and crisp detent feedback improve confidence with gloves or wet hands.
Built for duty use: 4140 steel construction resists wear, solvent exposure, and hard knocks better than lightweight aluminum/plastic alternatives.
Low-glare black finish: Reduces visual signature and blends with OEM receivers and controls.
Benelli family fit: Designed specifically for Benelli M1, M2, M3, and M4 shotguns in 12- and 20-gauge (see compatibility notes below).
Ideal Use Cases
Home defense & patrol guns: Faster, surer safety engagement in low light or high stress.
3-Gun & competition: Repeatable, positive clicks that keep your stage plan smooth.
Training shotguns: High-round-count classes demand controls that hold up and remain intuitive when fatigue creeps in.
Hunting & field: Glove-ready surface that stays easy to use in cold, wet conditions.
Feature Highlights
Material: 4140 steel for strength and long service life
Finish: Black (low-glare, corrosion resistant)
Ergonomics: Enlarged, contoured button with tactile texture for positive actuation
Detent feel: Tuned interface for crisp on/off confirmation
Gauge Compatibility: 12- and 20-gauge
Platform Fit: Benelli M1/M2/M3/M4 (pattern-specific; see notes)
Model / SKU: BM2SB12
UPC: 793811766363
Package typically includes the safety button only. Reuse OEM spring/detent unless otherwise specified by the manufacturer.
What You’ll Notice After Install
Fewer fumbles: The safety is easier to locate and actuate without shifting your master hand.
Crisp confirmation: More distinct on/off detent feel helps you verify status by touch.
Durable confidence: Steel construction shrugs off repeated use, cleaning solvents, and rough handling.
Compatibility Notes (Read First)
Benelli models: Designed for M1, M2, M3, and M4 receivers. If your shotgun is a different Benelli variant (e.g., SBE, Nova), verify fit before purchase.
Gauge: Engineered for 12- and 20-gauge configurations within the listed Benelli families.
Right-/left-handed users: Safety orientation on Benelli platforms may be reversible; consult your manual for ambi conversions.
Gunsmithing: Some users can install at home; others may prefer a qualified armorer/gunsmith, especially if reversing the safety side or replacing detent/spring.
Installation (Quick Start)
Unload & verify clear. Check chamber, carrier, and magazine tube.
Disassemble per the manual. Remove trigger group and access the safety assembly.
Control small parts. Capture the detent and spring to prevent loss.
Swap the safety. Insert the Strike Industries BM2SB12 and reassemble with the OEM detent/spring (or replacements as needed).
Function check. Confirm positive detent in both positions, proper trigger block, and safe operation with the firearm unloaded.
Pro tip: Add a small witness mark to the receiver near the safety—helpful for quick visual checks on the line.
Safety, Handling & Legal
Follow your manual. Confirm the safety correctly blocks the trigger and allows fire when disengaged.
Range test first. After installation, test with inert/dummy shells before live fire.
Know your laws. Accessory changes must comply with federal, state, and local regulations.
Four rules always. A better safety doesn’t replace safe handling.
Maintenance & Care
Clean & lube lightly: Wipe carbon and debris from the safety cavity during routine cleaning; apply a drop of oil to the detent interface.
Inspect regularly: Check for proper detent tension and secure fit after classes or high round counts.
Solvent-smart: 4140 steel tolerates common cleaners; avoid aggressive chemicals on surrounding polymer parts.
Specifications (At-a-Glance)
Why Choose Strike Industries for Your Benelli?
Ergonomic advantage: Bigger, smarter surface where it matters most—your primary control.
Duty-grade material: 4140 steel construction outlasts lighter alloys in harsh conditions.
Purpose-built fit: Designed around Benelli’s proven M1/M2/M3/M4 operating systems.
SEO Highlights (Quick Scan)
Strike Industries enhanced safety for Benelli M1/M2/M3/M4
4140 steel, black finish, 12/20 gauge compatibility
BM2SB12, UPC 793811766363
Faster, tactile on/off with glove-friendly control
Suggested Meta Title
Strike Industries Enhanced Safety for Benelli M1/M2/M3/M4 — 12/20 Gauge, Black 4140 Steel | BM2SB12 | UPC 793811766363
Suggested Meta Description
Upgrade your Benelli with Strike Industries’ Enhanced Safety. 4140 steel, black finish, glove-friendly tactile design, and fit for M1/M2/M3/M4 12/20 gauge shotguns. Model BM2SB12, UPC 793811766363.
The End
