Strike Industries Takedown/Pivot Pins — AR-10 — Black Steel — AR10EPTPBK — UPC 793811766554

Upgrade the small parts that make a big difference. The Strike Industries AR-10 Takedown/Pivot Pins are precision-machined black steel replacements engineered to deliver smoother disassembly, repeatable upper/lower lockup, and long-term durability on large-frame AR builds. Whether you’re finishing a new .308/6.5 build or refreshing a hard-run rifle, Model AR10EPTPBK (UPC 793811766554) gives you a robust, corrosion-resistant pin set designed for confident fieldstrips and consistent return to zero.

Why upgrade your pins? Quality takedown and pivot pins improve the “feel” and repeatability of upper/lower fitment, reduce wobble with in-spec receivers, and make maintenance faster—especially with gloved or cold hands.

Key Benefits

• Smoother fieldstrips: Precision-ground shafts and consistent head geometry make it easier to separate the receivers at the bench or in the field.

• Rock-solid lockup: In-spec diameters help maintain a tight upper/lower interface (receiver tolerances permitting) for better repeatability after cleaning.

• Built to last: Hardened steel with a black corrosion-resistant finish stands up to solvents, sweat, weather, and high round counts.

• User-friendly handling: Low-profile heads provide confident purchase without snagging kit or gloves.

• No-nonsense compatibility: Purpose-built for AR-10 / large-frame AR patterns (see pattern notes below) used in .308 Win, 6.5 Creedmoor, and similar.

Ideal Use Cases

• New AR-10 builds: Start with precise, durable pins that fit right and feel right.

• Refresh & reliability: Replace worn, loose, or corroded pins on high-mileage rifles.

• Precision & hunting rigs: Consistent upper/lower mating for repeatable dope after teardown.

• Training & duty carbines: Fast, confident fieldstrips during courses, cleaning, and troubleshooting.

Feature Highlights

• Material: Hardened steel for strength and wear resistance

• Finish: Black (corrosion-resistant, low-glare)

• Profile: Low-snag heads, smooth shanks for consistent receiver fit

• Detent interface: Chamfered/dimpled tips aid detent engagement during install

• Includes: Takedown pin + Pivot pin (springs/detents not typically included)

• Model / SKU: AR10EPTPBK

• UPC: 793811766554

Pin dimensions follow large-frame AR standards. Always verify receiver pattern before purchase.

Compatibility Notes (Read First)

Large-frame ARs aren’t universally standardized. These pins are intended for AR-10-type / .308-pattern receivers.

• DPMS/LR-308 vs. Armalite AR-10: Pin dimensions and receiver lug geometry can differ. Confirm your upper/lower pattern with the manufacturer.

• Mixed receivers: Using different-brand uppers and lowers may affect fit; in-spec parts provide best results.

• Not for AR-15: These are AR-10 / .308-pattern pins and will not fit small-frame AR-15s.

What You’ll Notice After Installing

• Clean, positive movement: Pins push and capture with consistent detent feel—no gritty spots or mushy engagement.

• Reduced wobble (receiver-dependent): A snug, in-spec interface can tighten up upper/lower play.

• Faster maintenance: Easy-to-manipulate heads make fieldstrips quicker, even with light gloves.

Installation (Quick Start)

1. Unload & clear the rifle; visually/physically confirm chamber and magwell are empty.

2. Protect the finish: Tape around pin holes. Work over a tray to catch detents and springs.

3. Remove old pins: Ease out the takedown and pivot pins while controlling detents.

4. Install pivot pin first: Insert detent/spring, then slide the pivot pin through the lug while capturing the detent (a pivot-pin tool or razor blade helps).

5. Install takedown pin: Repeat at the rear; ensure detent engages the groove cleanly.

6. Function check: Open/close the receivers; verify smooth travel and positive stops. Re-lube contact points lightly if needed.

Pro tip: A dedicated pivot-pin installation tool saves time and prevents detent launches across the shop.

Care & Maintenance

• Keep it clean: Wipe carbon and grit from pin channels during routine cleaning.

• Light lube: A thin film of oil on shanks prevents corrosion and eases operation.

• Inspect detents/springs: Replace worn or damaged small parts to maintain crisp engagement.

Safety & Compliance

• Use in-spec receivers only. Forcing pins through tight or misaligned holes can damage lugs.

• Follow manufacturer torque and assembly practices.

• Observe all local, state, and federal laws regarding firearm modification and use.

Specifications (At-a-Glance)

• Brand: Strike Industries

• Product: Takedown & Pivot Pin Set (AR-10)

• Material: Hardened steel

• Finish: Black, corrosion-resistant

• Platform: AR-10 / .308-pattern receivers (pattern-dependent)

• Includes: 1× pivot pin, 1× takedown pin

• SKU: AR10EPTPBK

• UPC: 793811766554

SEO Highlights (Quick Scan)

• Strike Industries AR-10 takedown/pivot pin set

• Black hardened steel replacement pins for .308-pattern rifles

• Smoother fieldstrips, tighter upper/lower lockup, corrosion-resistant finish

• AR10EPTPBK, UPC 793811766554

Suggested Meta Title

Strike Industries AR-10 Takedown & Pivot Pins — Black Steel | AR10EPTPBK | UPC 793811766554

Suggested Meta Description

Upgrade your large-frame AR with Strike Industries AR-10 takedown/pivot pins. Hardened black steel, smooth fieldstrips, and consistent upper/lower lockup for .308-pattern rifles. Model AR10EPTPBK, UPC 793811766554.

The End