Product Overview

Introducing the Sunline FC Sniper 200 yd Natural Clear – a high‑performance, low‑VOC paint designed for both interior and exterior applications. Packaged in an 8‑pound container, this premium coating delivers a crystal‑clear finish that enhances the natural beauty of any surface while providing outstanding protection.

• Coverage: Up to 200 yards per 8‑lb container
• Finish: Transparent, natural‑clear gloss
• VOC Content: < 50 g/L (environmentally compliant)
• Dry Time: Touch dry in 30 minutes, recoat in 2 hours
• Application: Brush, roller, or airless spray
• Suitable Surfaces: Wood, metal, masonry, concrete, and more

Key Features & Benefits

1. Superior Clarity & Depth

The Sunline FC Sniper formula provides a crystal‑clear, high‑gloss finish that brings out the natural grain of wood and the subtle textures of other substrates without yellowing over time.

2. Fast Drying Technology

Engineered with advanced drying agents, this paint reaches a touch‑dry state within 30 minutes, allowing for rapid project turnaround and multiple coats in a single day.

3. Low VOC for Healthier Spaces

With a VOC level under 50 g/L, Sunline FC Sniper meets strict environmental regulations and contributes to better indoor air quality, making it ideal for residential and commercial spaces.

4. Durable, Weather‑Resistant Protection

Formulated to resist UV radiation, moisture, and temperature fluctuations, this clear coat protects surfaces from fading, cracking, and peeling for years.

5. Versatile Application Methods

Whether you prefer a brush, roller, or airless sprayer, Sunline FC Sniper delivers a smooth, even coat with minimal brush marks or splatter.

6. Eco‑Friendly Packaging

The 8‑lb recyclable container reduces waste and is designed for easy handling and storage on job sites.

Technical Specifications

Ideal Applications

Sunline FC Sniper 200 yd Natural Clear is the perfect solution for a wide variety of projects, including:

• Residential interior trim and molding
• Exterior doors, shutters, and siding
• Commercial storefronts and signage
• Furniture restoration and custom cabinetry
• Boat decks and marine hardware (with proper surface preparation)
• Industrial equipment and metalwork that requires a protective clear coat

Safety & Environmental Information

Always wear appropriate personal protective equipment (PPE) such as gloves, goggles, and a respirator when handling paint. Ensure adequate ventilation in the work area. This product complies with EPA’s VOC regulations and is safe for use in occupied spaces once fully cured.

How to Apply

1. Surface Preparation: Clean the surface of dust, grease, and loose material. Sand if necessary to achieve a smooth base.
2. Stirring: Gently stir the paint for 2‑3 minutes to ensure uniform consistency. Avoid shaking, which can introduce bubbles.
3. Priming (if required): For porous surfaces, apply a compatible primer before the clear coat for optimal adhesion.
4. Application: Using a high‑quality brush, roller, or airless sprayer, apply a thin, even coat. Overlap each pass slightly to avoid streaks.
5. Dry Time: Allow 30 minutes for touch‑dry. Apply additional coats after 2 hours for a richer gloss and increased durability.
6. Cleanup: Clean tools with warm, soapy water if the paint is still wet; use a suitable solvent for dried residues.