T. H. MARINE 12V Oil Changer – Model BE‑GE‑52616‑DP
The T. H. Marine 12V Oil Changer (Model BE‑GE‑52616‑DP) is the ultimate solution for marine operators who demand fast, clean, and reliable oil changes on the water. Engineered specifically for 12‑volt boat engines, this compact, high‑performance unit delivers professional‑grade oil filtration and circulation without the need for a workshop. Whether you run a small outboard or a larger in‑board system, the T. H. Marine Oil Changer helps you extend engine life, reduce downtime, and maintain peak performance on every voyage.
Key Benefits
- Rapid Oil Changes: Complete a full oil flush and refill in under 10 minutes—no lifting or draining required.
- 12‑Volt Compatibility: Designed to operate directly from your boat’s standard 12‑volt electrical system, eliminating the need for external power sources.
- Enhanced Engine Protection: Advanced filtration captures particles down to 10 µm, preventing wear and corrosion.
- Compact & Portable: Lightweight housing (under 4 lb) fits easily in tight engine compartments.
- Eco‑Friendly Operation: Minimal oil waste and a sealed system reduce environmental impact.
- User‑Friendly Interface: Intuitive control panel with LED indicators for power, flow, and oil level.
Technical Specifications
| Model | BE‑GE‑52616‑DP |
|---|
| Voltage | 12 V DC (12‑24 V compatible) |
|---|
| Power Consumption | ≤ 35 W |
|---|
| Flow Rate | Up to 3 L/min (0.8 gal/min) |
|---|
| Filtration Capacity | 10 µm absolute retention |
|---|
| Oil Capacity | Up to 5 L (1.3 gal) per cycle |
|---|
| Operating Temperature | -10 °C to 45 °C (14 °F to 113 °F) |
|---|
| Dimensions (L×W×H) | 210 mm × 120 mm × 115 mm |
|---|
| Weight | 3.8 kg (8.4 lb) |
|---|
| Material | Marine‑grade aluminum housing, stainless‑steel pump, and high‑temperature resistant seals |
|---|
| Compliance | ABYC, ISO 9001, CE certified |
|---|
Compatibility
The T. H. Marine 12V Oil Changer is engineered for a wide range of marine propulsion systems, including:
- Outboard engines (75 hp to 300 hp)
- In‑board diesel and gasoline engines (up to 500 hp)
- Hybrid propulsion units that operate on a 12‑volt DC supply
Always verify your engine’s oil capacity and filter specifications to ensure optimal performance.
Easy Installation & Operation
- Mount the Unit: Secure the oil changer to a flat surface near the engine using the pre‑drilled mounting holes.
- Connect Power: Plug the 12‑V DC harness into an appropriate fuse‑protected circuit.
- Attach Oil Lines: Connect the inlet and outlet hoses to the engine’s oil ports using the supplied clamps.
- Start the Cycle: Press the “Start” button; the LED indicator will turn green when flow is established.
- Monitor & Finish: The system automatically stops after the preset oil volume is exchanged. Remove the drain plug and refill with fresh marine‑grade oil.
Why Choose T. H. Marine?
T. H. Marine has been a trusted name in marine maintenance equipment for over three decades. Our commitment to innovation, durability, and marine‑specific engineering means you receive a product that stands up to the harshest saltwater environments while delivering consistent, reliable performance. With a global network of service centers and a robust warranty, you can purchase with confidence.
Frequently Asked Questions
- Can the oil changer be used with both diesel and gasoline engines?
- Yes. The unit’s pump and filtration system are compatible with both diesel and gasoline marine oils.
- Do I need any special tools for installation?
- Only basic hand tools (screwdriver, wrench) are required. All mounting hardware and hose clamps are included.
- How often should I perform an oil change with this system?
- We recommend following the engine manufacturer’s service intervals—typically every 100–150 operating hours or as indicated by oil analysis.
- Is the system waterproof?
- The housing is sealed to IP68 standards, protecting internal components from water ingress even in heavy spray conditions.
- What type of oil filter does the unit use?
- The oil changer includes a replaceable 10 µm filter cartridge designed specifically for marine applications.
Customer Reviews
"The T. H. Marine oil changer saved us hours of dock time. Simple to install and the oil looks cleaner than ever." – Captain Laura M., Sailor
"A must‑have for any serious boat owner. The 12‑V operation fits perfectly with our existing electrical system." – Mike J., Yacht Owner
Contact Us for Technical Support | Download Full User Manual (PDF)
