TacFire Parts Kit — Glock® 17 Gen3, Black (PKGLK17 | UPC 686294506031)

Refresh, rebuild, or complete your slide/frame project with the TacFire Parts Kit for Glock 17 Gen3. Designed around OEM-style Gen3 geometry, this black small-parts bundle helps restore reliable function to high-round-count pistols or finish a component build with matched, ready-to-install pieces. Whether you’re doing preventive maintenance before a training class or bringing a used pistol back to factory-smooth operation, the PKGLK17 kit offers value, convenience, and dependable fitment for Gen3-pattern G17 pistols.

Why Choose the TacFire PKGLK17 Kit?

• Gen3 Compatibility: Built to Glock 17 Gen3 specs for straightforward drop-in fit on most Gen3 slides and frames.

• Reliability Refresh: Replacing worn springs, pins, and small parts can improve ignition consistency, ejection pattern, and overall cycling.

• Time-Saving Bundle: One package covers the common wear items you’d otherwise source one by one—ideal for armorers, instructors, and frequent shooters.

• Training & Duty Ready: Keep a kit on hand to service pistols between classes, qualifications, and range days.

• Budget-Smart: Affordable way to maintain your G17 without compromising on function.

What’s Typically Included*

(Always verify the seller’s bill of materials—contents can vary by lot.)

• Slide Components:

  • Striker/firing pin (Gen3 pattern)

  • Firing pin spring & spring cups

  • Firing pin safety plunger & spring

  • Extractor & extractor depressor plunger assembly (spring & bearing)

  • Back plate (slide cover plate)

• Frame/Lower Components:

  • Trigger with trigger bar (Gen3 style)

  • Trigger housing w/ ejector (G17 Gen3 spec)

  • Trigger spring

  • Connector (standard)

  • Slide lock (takedown) & spring

  • Slide stop lever & spring (Gen3 style)

  • Magazine catch & spring

  • Locking block pin, trigger pin, and trigger housing pin (3-pin set)

• Other:

  • Recoil spring assembly (G17 length)

  • Channel liner (if included)

  • Small springs & detents specific to Gen3 design

Some kits exclude sights, barrel, slide, frame, or magazines. Confirm exactly what is included before purchase.

Key Features & Specs

• Platform: Glock® 17 Gen3 (9mm)

• Color: Black

• Part Number: PKGLK17

• UPC: 686294506031

• Use Case: Maintenance, repairs, and parts replacement for Gen3 G17 pistols; component builds using Gen3-pattern frames/slides

Performance Benefits You’ll Notice

• Cleaner Trigger Reset: Fresh springs and connector can restore a consistent break and reset feel.

• Positive Extraction & Ejection: New extractor and plunger spring help stabilize ejection patterns and reduce stovepipes.

• Reliable Ignition: Proper striker spring tension supports consistent primer strikes and reduces light-strike headaches.

• Solid Lock-Up: Updated pins and slide lock improve overall fit when parts have worn from heavy use.

Compatibility & Fit Notes

• Generations: Intended for G17 Gen3. Not drop-in for Gen4/Gen5 due to different springing, dimensions, and part interfaces.

• Caliber: Designed around 9mm Luger G17 spec; not for G22/G31 or other calibers without caliber-specific parts.

• Aftermarket Frames/Slides: Most Gen3-pattern components and Polymer-style frames are compatible; minor fitting may be required depending on brand tolerances.

• Holster/Sight Setup: This is a parts kit—sights, barrel, slide, and frame are not included unless specified.

Installation Best Practices (Non-Instructional)

1. Safety First: Confirm the pistol is unloaded and remove all ammo from the bench.

2. Use Proper Tools: 3/32" punch, armorer’s block, and a non-marring bench surface simplify assembly.

3. Channel Liner Care: Install a new channel liner (if included) using a proper tool—avoid crushing or over-driving it.

4. Correct Spring Orientation: Pay attention to trigger spring and slide stop spring directions to ensure proper function.

5. Function Check: After assembly, perform full checks—reset, safety engagement, trigger operation, and safe dry-fire cycling—before any live fire.

6. Test with Your Ammo: Validate reliability with your chosen defensive/training loads and verify ejection pattern and lock-back.

Ideal Users & Use Cases

• High-Round-Count Shooters who want fresh small parts before a class or match.

• Armorer/Range Staff maintaining student or rental G17 fleets.

• Home Builders completing a Gen3-pattern project with matched internals.

• Duty/Defense Owners seeking OEM-style function with a straightforward parts refresh.

Maintenance Tips

• Interval Checks: Inspect extractor tension, recoil spring assembly condition, and striker channel cleanliness every few thousand rounds.

• Keep It Clean: Avoid over-lubing the striker channel; use a light oil film on rails and contact points.

• Spare on Hand: Keep a second PKGLK17 kit in your range bag for quick swaps and diagnostics.

SEO-Friendly Search Terms

TacFire Glock 17 Gen3 parts kit, PKGLK17, 686294506031, Glock G17 Gen3 lower parts kit, Glock 17 Gen3 slide parts kit, replacement small parts for Glock 17, Gen3 trigger parts kit, extractor firing pin spring Glock 17, recoil spring assembly G17 Gen3, Glock 17 rebuild kit.

TacFire Parts Kit — Glock 17 Gen3, Black (PKGLK17 | 686294506031): a comprehensive, Gen3-compatible small-parts bundle that restores factory-smooth function and reliability to your G17—perfect for rebuilds, maintenance, and component pistol projects.

The End