Take off Pre Drilled front sight block AK-74 AK-100 24 x 1.5 RH threads No Plunger Pin Lug AK-168BT

Take off Pre Drilled Front Sight Block AK-74 AK-100 24x1.5 RH Threads No Plunger Pin Lug AK-168BT Take off Pre Drilled Front Sight Block AK-74 AK-100 24x1.5 RH Threads No Plunger Pin Lug AK-168BT The Take off Pre Drilled Front Sight Block AK-74 AK-100 24x1.5 RH Threads No Plunger Pin Lug AK-168BT is a genuine take-off front sight block removed from surplus AK-74 and AK-100 series rifles. This pre-drilled front sight base features 24x1.5mm right-hand threading and is specifically designed without a plunger pin lug or bayonet lug. The AK-168BT offers an excellent option for builders who need a properly threaded front sight block for modern muzzle devices without the added bayonet lug feature. Genuine Take-Off Part This front sight block is a take-off component, meaning it was originally installed on a factory rifle and later removed. Take-off parts are often preferred by builders because they have already been properly fitted and drilled at the factory. Each AK-168BT has been inspected to ensure it remains in good, serviceable condition with intact threads and mounting surfaces. Key Features of the AK-168BT Model: AK-168BT Type: Take-Off / Surplus Compatibility: AK-74 & AK-100 Series Threading: 24x1.5mm Right Hand (RH) Features: Pre-Drilled, No Bayonet Lug, No Plunger Pin Lug Best Use: Custom Builds, Muzzle Device Installation, AK-74 / AK-100 Projects 24x1.5mm Right Hand Threading The AK-168BT is machined with 24x1.5mm right-hand threads. This threading specification is the standard for most AK-74 and AK-100 platforms and allows for direct installation of a wide range of modern muzzle brakes, flash hiders, and suppressors. The right-hand thread direction ensures secure attachment without the need for thread adapters. Pre-Drilled for Easy Installation This front sight block comes pre-drilled from the factory, which significantly simplifies the installation process. Builders do not need to perform the complex drilling and pinning process themselves. The existing pin holes are properly located and sized for standard installation on compatible AK-74 and AK-100 barrels. No Bayonet Lug Design The AK-168BT is specifically the version without a plunger pin lug or bayonet lug. This makes it an ideal choice for builders who want a clean, minimalist front sight block focused on muzzle device compatibility rather than bayonet mounting. The absence of the lug also results in a slightly lower profile on the front of the rifle. Specification Details Model AK-168BT Type Take-Off / Surplus Compatibility AK-74 & AK-100 Series Threading 24x1.5mm Right Hand Bayonet Lug No Pre-Drilled Yes Best Use Custom AK-74 / AK-100 Builds Why Choose the AK-168BT? The Take off Pre Drilled Front Sight Block AK-168BT is an excellent choice for builders looking for a genuine factory front sight block with 24x1.5mm right-hand threads and no bayonet lug. Its pre-drilled design saves significant time and effort during installation, while the take-off nature ensures it has already been properly fitted at the factory. This makes the AK-168BT a practical and cost-effective option for custom AK-74 and AK-100 builds where a clean front sight block without a bayonet lug is desired. Upgrade your AK-74 or AK-100 build with the AK-168BT. This take-off pre-drilled front sight block offers 24x1.5mm right-hand threads and a clean design without a bayonet lug. The End