Talley Browning X-Bolt Smoked Bronze Picatinny Rail — Short Action, 0 MOA — P00SB735 (UPC: 810301025257)
Turn your Browning X-Bolt into a truly modular optics platform with the Talley Smoked Bronze Picatinny Rail for Short Action receivers. Purpose-built with a 0 MOA cant for maximum zeroing flexibility from close-range hunting to mid-range precision, this one-piece base delivers repeatable return-to-zero, rock-solid ring engagement, and a finish that matches Browning’s Smoked Bronze aesthetic. From lightweight LPVOs to compact thermals, the Talley rail gives your X-Bolt the mounting real estate to run today’s optics—and tomorrow’s.
Why This Rail
True 0 MOA: Flat, no-cant geometry keeps your optic in the middle of its elevation range—ideal for typical hunting distances and all-around zeroing.
Short Action Specific: Machined for Browning X-Bolt Short Action footprint to maximize screw purchase and receiver fit.
One-Piece Precision: Continuous Picatinny rail ensures consistent ring spacing and alignment for traditional rings, QD mounts, or direct Picatinny scope mounts.
Smoked Bronze Finish: Premium colorway complements X-Bolt models with bronze/Cerakote finishes for a clean, factory-grade look.
Talley Quality: Known for dependable tolerances, secure hardware, and hard-use reliability in the field.
At a Glance
Platform: Browning X-Bolt (Short Action)
Cant: 0 MOA
Style: One-piece Picatinny scope base
Color/Finish: Smoked Bronze
SKU/Part #: P00SB735
UPC: 810301025257
Brand: Talley
Key Features & Benefits
Optimized Ring Interface: MIL-STD-1913 Picatinny cross slots support a wide range of ring heights, QD mounts, and accessories.
Enhanced Repeatability: One-piece construction maintains alignment through travel, recoil, and temperature swings.
Secure Mounting Hardware: Includes model-specific screws (use manufacturer torque guidance) for a dependable, worry-free install.
Hunter-Ready Profile: Low, streamlined base keeps your optic closer to the bore for better cheek weld and natural sight alignment.
Weather-Resistant Finish: Smoked Bronze coating resists scratches and blends with modern bronze X-Bolt finishes.
Who It’s For
Big-game hunters who want a reliable base that won’t shift in harsh mountain weather.
Precision-minded shooters who prefer a 0 MOA setup for typical hunting/target distances.
Modern rifle builders matching bronze receivers/barrels with a color-coordinated, premium rail.
Compatibility
Fits: Browning X-Bolt Short Action receivers.
Does not fit: Long Action, Super Short, or other non-X-Bolt footprints.
Optics: Works with Picatinny-compatible rings and mounts, including traditional two-piece rings, mono-mounts, and QD bases.
Installation Notes
Prep: Degrease receiver holes and screws. Lightly oil or apply thread treatment where specified by the manufacturer.
Torque: Follow Talley/Browning recommended values (commonly measured in inch-pounds). Do not over-torque.
Verify: Ensure rail sits flush with no gaps; confirm bolt clearance and magazine function.
Final Check: Bore-sight, then confirm zero at the range before hunting.
Care & Maintenance
Wipe with a soft cloth after wet or dusty hunts; avoid harsh abrasives.
Periodically confirm screw torque—especially after travel or temperature swings.
Keep cross slots clean so rings clamp uniformly.
FAQ
Why choose 0 MOA instead of 20 MOA?
A 0 MOA rail keeps your optic’s elevation near center, ideal for typical hunting distances where you don’t need extra “down” elevation for very long shots.
Will this match my X-Bolt Smoked Bronze finish?
Yes—this rail is finished in Smoked Bronze to complement bronze X-Bolt models for a cohesive look.
Which rings should I use?
Any quality Picatinny-compatible ring set in the height your scope’s objective and bolt handle require. Choose low/medium/high based on optic size and cheek weld.
Is bedding required?
Usually not. If receiver tolerances or environmental factors demand it, consult a qualified gunsmith.
Specifications
Brand: Talley
Product: Picatinny Rail (One-Piece)
Platform: Browning X-Bolt Short Action
Cant: 0 MOA
Material: Precision-machined steel or aluminum alloy (per Talley model spec)
Finish: Smoked Bronze
SKU / Part #: P00SB735
UPC: 810301025257
Safety & Compliance: Ensure the rifle is unloaded before installation. Follow all manufacturer instructions and torque specs. Confirm reliable function and zero before field use.
Meta (for SEO)
Meta Title: Talley Browning X-Bolt Smoked Bronze Picatinny Rail — Short Action, 0 MOA — P00SB735, UPC 810301025257
Meta Description: Mount optics with confidence using the Talley Smoked Bronze Picatinny Rail for Browning X-Bolt Short Action. 0 MOA cant, one-piece base, bronze finish to match X-Bolt. Part P00SB735, UPC 810301025257.
The End
