Talley Scope Mount/Ring Combo — 1" Tube, Medium, 0 MOA, Black Aluminum for Winchester XPR (940765 • UPC 810301021716)
Lock in your optic and lose the weight. The Talley Scope Mount/Ring Combo for Winchester XPR rifles blends a precision one-piece ring/base design with lightweight aluminum construction to deliver rock-solid alignment, dependable zero retention, and a streamlined look. Sized for 1" scope tubes with Medium height and a 0 MOA base angle, this combo is purpose-built for reliable field performance on hunting rifles where simplicity and strength matter.
Why Hunters Choose Talley One-Piece Mounts
Traditional two-piece systems can introduce tolerance stacking and alignment headaches. Talley’s integrated design machines the base and rings from a single billet, reducing parts, screws, and potential failure points. The result is a mount that’s lighter, cleaner, and easier to set up—without sacrificing the repeatable return to zero you need when your shot window is measured in seconds.
Key Features at a Glance
Platform Fit: Winchester XPR (model-specific footprint)
Tube Diameter: 1" — fits a broad range of popular hunting optics
Ring Height: Medium — balanced objective clearance for most 1" scopes (verify with your bell size and barrel contour)
Base Cant: 0 MOA — true mechanical zero for typical hunting distances
Construction: CNC-machined aluminum one-piece ring/base combo
Finish: Black (hardwearing, low-glare)
Weight: Lightweight design helps maintain natural rifle balance
Hardware: Quality fasteners and cross-bolts designed for secure rail/receiver interface
Part / UPC: 940765 / 810301021716
Built for Real-World Hunts
Rigid, One-Piece Alignment: Eliminates separate bases and alignment bars in most cases, minimizing scope tube stress and easing installation.
Lightweight, Field-Ready: Cuts ounces where it counts while retaining the stiffness to ride out recoil and rough travel.
Corrosion-Resistant Finish: The low-glare black exterior shrugs off weather and blends with modern hunting rifles.
0 MOA Neutral Cant: Keeps your scope’s internal elevation centered for common big-game ranges and simple dope.
Ideal Use Cases
Big-game hunts: Elk, deer, and pronghorn where rugged simplicity and hold-zero reliability are top priorities.
Mountain & backcountry: Ounce-counting setups that still demand a firm clamp and stable alignment.
General range work: Zero, confirm, and practice with less fiddling and more shooting.
Compatibility Notes
Rifle: For Winchester XPR actions drilled/tapped to factory spec (check your receiver screw pattern).
Objective Clearance: “Medium” height works with many 1" scopes in the 36–44 mm objective range on typical sporter barrels; large turrets, 50 mm objectives, or heavy contours may require more height.
Scope Tube: 1" only (not for 30 mm or 34 mm tubes).
Installation Tips (Best Practices)
Dry Fit & Degrease: Clean receiver threads and screws. Lightly oil or apply thread prep per manufacturer guidance.
Set Eye Relief: Place the scope in the rings, slide to a full field of view at max magnification, and square the reticle to the rifle.
Torque Evenly: Tighten ring cap screws in an alternating X-pattern, then secure base screws to Talley-recommended torque values (consult the latest Talley instructions).
Witness Mark: Add a small paint mark on screws to monitor movement after recoil cycles.
Re-check After Zeroing: Confirm torque after the first range session and seasonal temperature changes.
Specifications
Brand: Talley
Product Type: Scope Mount/Ring Combo (integrated one-piece)
Rifle Fit: Winchester XPR
Tube Diameter: 1"
Ring Height: Medium
Base Cant: 0 MOA
Material: Aluminum (CNC-machined)
Finish: Black
Part Number: 940765
UPC: 810301021716
Pro Tip: For hunting in extreme conditions, keep a small Torx/Allen tool in your kit and verify screw torque periodically. A small preventative check preserves zero when it matters most.
SEO Metadata (Merchant-Ready)
SEO Title: Talley Scope Mount/Ring Combo for Winchester XPR — 1" Tube, Medium, 0 MOA, Black Aluminum (940765)
Meta Description (≤160 chars): Talley one-piece 1" Medium 0 MOA mount/ring combo for Winchester XPR. Lightweight black aluminum, precision alignment, dependable zero. 940765.
Target Keywords: Talley Winchester XPR mount, Talley 940765, 1 inch scope rings XPR, 0 MOA scope mount, integrated ring base, lightweight hunting scope mount, medium rings 1"
Alt Text (Images): “Talley one-piece 1-inch Medium 0 MOA black aluminum scope mount/ring combo for Winchester XPR.”
FAQ
Q: Will this fit my Winchester XPR?
A: Yes—this part is designed for the Winchester XPR receiver drilled/tapped to factory spec. Verify your action and screw spacing before purchase.
Q: What scope tube size does it accept?
A: 1" only. If your scope has a 30 mm or 34 mm tube, choose the appropriate Talley part.
Q: Is 0 MOA right for me?
A: For most hunting distances, 0 MOA keeps your optic mechanically centered and straightforward to zero. If you dial long range frequently, consider a canted base.
Q: What objective sizes work with Medium?
A: Many 36–44 mm objectives on standard sporter contours fit well, but always confirm with your scope’s bell diameter, cap height, and barrel contour.
Q: What torque settings should I use?
A: Follow Talley’s current torque guidance and your scope manufacturer’s specs. Tighten screws evenly in stages and avoid over-torquing.
The Talley Scope Mount/Ring Combo (940765) streamlines your Winchester XPR setup with an integrated, lightweight mount that delivers solid alignment, consistent zero, and clean lines—exactly what you want on a hard-hunting rifle.
The End
