Talley Scope Mount/Ring Combo — Black Anodized — 30mm Tube — High Rings — Fits Browning X-Bolt Short / Super Short Action — 20 MOA — 750735SM (UPC: 810301024700)
Unlock long-range potential on your Browning X-Bolt with the Talley Scope Mount/Ring Combo. Purpose-built for 30mm optics and engineered in a one-piece ring/base format, this black anodized system fits X-Bolt Short and Super Short Action receivers and features an integrated 20 MOA elevation cant. The result: extra internal elevation for dialing dope at distance, rock-solid alignment, and fewer parts to shift under recoil. If you run modern 5-25x, 3-18x, or compact LPVOs and want dependable return-to-zero with the cleanest installation possible, Talley’s combo is your premium, ready-to-hunt solution.
Why This Talley Combo
Integrated 20 MOA Cant: Adds downward tilt to the optic, preserving elevation travel for mid- to long-range dialing—ideal for today’s ballistic apps and dope cards.
One-Piece Ring/Base Design: Eliminates tolerance stacking between separate bases and rings, improving alignment and consistency while simplifying setup.
30mm, High Ring Height: Clearance for larger objective bells and tall turrets common on modern first-focal-plane hunting and crossover scopes.
X-Bolt-Specific Footprint: Machined to fit Browning X-Bolt Short / Super Short receivers for maximum thread engagement and a seamless interface.
Hard-Use Finish: Black anodized surface resists corrosion, scratches, and harsh weather—from whitetail woods to high-country ridgelines.
At a Glance
Platform: Browning X-Bolt (Short / Super Short Action)
Tube Diameter: 30mm
Ring Height: High
Cant: 20 MOA (built-in)
Finish: Black anodized
Style: One-piece ring/base combo
Part #: 750735SM
UPC: 810301024700
Brand: Talley
Key Features & Benefits
More Dialing Headroom: The 20 MOA incline helps keep your erector assembly centered, improving optical performance and allowing longer zeros (e.g., 200 yd) while still reaching out.
Precision Alignment: Factory-matched rings and base ensure coaxial bores, minimizing scope tube stress and the need for lapping.
Light yet Rigid: Talley’s proven construction balances low weight with stiffness so you don’t sacrifice zero to ounces saved.
Repeatable Zero: Robust clamping and consistent torque values provide confidence through travel, recoil, and big temperature swings.
Clean, Low-Snag Profile: Streamlined radii glide into scabbards and pack pockets without catching.
Ideal Pairings & Use Cases
Western big-game & mountain hunts: Dial holds confidently for steep angles and wind.
Predator & varmint: Max elevation range for small-target precision at extended distances.
Range & crossover rifles: One mount that’s rugged enough for hunts and precise enough for steel.
Fit & Height Guidance
Fits: Browning X-Bolt Short / Super Short Action receivers.
Optics: 30mm scopes with medium-to-large objectives (common 42–56 mm) typically pair well with High rings on X-Bolt sporter and many heavier contours.
Tip: Measure objective outer diameter and consider barrel contour, flip caps, and desired cheek weld to confirm clearance.
Installation Notes
Prep: Degrease receiver holes and screws. Lightly oil or apply the thread treatment specified by Talley.
Mount: Set the one-piece combo on the X-Bolt receiver; snug base screws in sequence.
Level: Place scope, establish correct eye relief, and square the reticle.
Torque: Follow Talley’s inch-pound specs for base and ring cap screws—do not over-torque.
Verify: Cycle the bolt, check cap/eyepiece clearance, bore-sight, then confirm zero at the range.
Care & Maintenance
Wipe down after wet or dusty hunts; keep the ring interiors and screw heads clean.
Periodically confirm torque values, especially after air travel or big temperature changes.
Avoid harsh abrasives; use non-marring tools around the anodized finish.
FAQ
Why choose a 20 MOA mount for hunting?
It preserves elevation travel so you can dial farther with modern cartridges—without maxing out your scope’s turret.
Do I still need a separate base?
No. This is a one-piece ring/base combo, reducing parts and simplifying alignment.
Will it fit my long action X-Bolt?
This model targets Short / Super Short Action receivers. Choose the dedicated Talley model for Long Action.
Do I need to lap the rings?
Talley’s one-piece machining often eliminates the need for lapping. Verify with a quick alignment check; only lap if necessary.
What objectives will clear with ‘High’ rings?
Most 50–56 mm objectives clear standard sporter contours, but confirm your scope’s outer diameter, cap use, and barrel profile.
Specifications
Safety & Setup: Ensure your rifle is unloaded before installation. Follow Talley’s torque specs and re-verify zero after travel or significant environmental changes.
SEO Highlights (Quick Scan)
Talley one-piece scope mount/ring combo for Browning X-Bolt Short/Super Short
30mm High rings, 20 MOA cant, black anodized finish
Fewer parts, better alignment, more elevation travel for long-range
750735SM, UPC 810301024700
Meta (for SEO)
Meta Title: Talley Scope Mount/Ring Combo — 30mm High, 20 MOA, Black — Fits Browning X-Bolt Short/Super Short — 750735SM, UPC 810301024700
Meta Description: Maximize long-range dialing with Talley’s one-piece 30mm High, 20 MOA mount for Browning X-Bolt Short/Super Short. Black anodized, precise alignment, rock-solid zero. Part 750735SM, UPC 810301024700.
The End
