Talley Scope Mount/Ring Combo — Black Anodized, 30mm Tube, Low Rings, Fits Browning X-Bolt Short/Super Short Action, 20 MOA (Model 730735SM | UPC 810301024687)
Unlock more elevation and rock-solid repeatability on your Browning X-Bolt with the Talley Scope Mount/Ring Combo 30mm Low, 20 MOA (730735SM). This precision one-piece ring/base system is engineered specifically for X-Bolt Short and Super Short actions, pairing low 30mm rings with an integrated 20 MOA cant so you can keep dialing at distance without maxing out your scope’s internal travel. Finished in a durable black anodize, it’s the clean, lightweight, and field-proven upgrade serious hunters and precision-minded shooters choose.
Why This Talley Combo Stands Out
Integrated One-Piece Design: Base and rings are CNC-machined as a single unit to reduce tolerance stack, improve alignment, and resist shift under recoil—no separate bases to true, no ring lapping in most setups.
20 MOA Built In: Adds downward cant so you retain more “up” in your elevation turret for longer ranges—perfect for flat-shooting short-action cartridges.
X-Bolt Short/Super Short Fit: Hole spacing and footprint match Browning’s Short and Super Short receivers for a factory-correct, rock-solid interface.
30mm Low Rings: Keep your optic close to the bore for a natural cheek weld and faster target acquisition (always confirm objective/cover clearance).
Black Anodized Alloy: Lightweight, corrosion-resistant construction with a low-glare finish that blends with modern hunting rifles and optics.
Field Benefits You’ll Notice
More Dialing Headroom: The 20 MOA tilt helps you stay near the optical center and still reach out—great for zeroing at 100 and stretching to 600–1,000+ yards depending on your optic and load.
Consistent Zero & Return: The rigid, unitized platform shrugs off pack miles, truck rides, and temperature swings.
Improved Ergonomics: Low ring height supports a solid cheek weld for steadier prone, kneeling, or offhand shots.
Faster Setup: With the base and rings integrated, leveling and torqueing are straightforward—get on paper and start confirming dope sooner.
Ideal Use Cases
Western big-game hunting where lighter gear, rugged reliability, and longer shot windows matter.
Range days & practice for refining drops and wind calls with short-action cartridges.
Steel/club matches where a stable interface and extra elevation are must-haves.
Fitment & Compatibility
Clearance Tip: Low rings commonly clear many 40–44 mm objectives (often with caps) on standard X-Bolt barrel contours. For larger objectives or tall flip caps, measure to ensure adequate barrel/hood clearance.
Installation Best Practices
Safety First: Verify the rifle is unloaded before mounting.
Degrease & Prep: Clean receiver holes and screws; dry thoroughly.
Set the Mount: Place the Talley one-piece on the receiver and start all screws by hand to avoid cross-threading.
Torque in Sequence: Tighten base screws to Talley’s spec (commonly 15–25 in-lb). Install the scope, then snug ring-cap screws in an X-pattern to the scope maker’s limits (often 15–18 in-lb for 30mm tubes).
Level & Eye Relief: Level the rifle, set eye relief at max magnification, plumb the reticle, then final-torque caps evenly.
Threadlocker: Use a small amount of removable (blue) threadlocker on clean threads if recommended.
Note: Over-torque can deform scope tubes. Use a calibrated inch-pound wrench and follow manufacturer specifications.
Specifications
Brand: Talley
Product: Scope Mount/Ring Combo
Construction: CNC-machined, one-piece integrated ring/base
Tube Size: 30mm
Ring Height: Low
Cant: 20 MOA
Finish: Black anodized
Platform Fit: Browning X-Bolt Short/Super Short Action
Model #: 730735SM
UPC: 810301024687
Included: One-piece mount with integral 30mm low rings; mounting screws (per manufacturer package)
Care & Maintenance
Re-check torque after your first range session and at seasonal changes.
Keep it clean: Wipe grit/dust; avoid harsh abrasives on the anodized finish.
Protect hardware: Apply a light rust inhibitor to exposed steel fasteners in wet climates.
Who It’s For
Backcountry hunters chasing ounces without sacrificing zero.
Precision-minded shooters running 30mm glass who need extra elevation from a 20 MOA base.
X-Bolt owners who prefer the simplicity, alignment, and durability of an integrated ring/base solution.
SEO-Friendly Keywords (Use Naturally on Your Product Page)
Talley 730735SM, Talley X-Bolt short action 20 MOA, 30mm low rings X-Bolt, integrated ring base Browning X-Bolt, black anodized scope mount 30mm, X-Bolt super short action scope mount, UPC 810301024687, one-piece 20 MOA mount rings.
Outfit your Browning X-Bolt Short/Super Short with the Talley 730735SM—the lightweight, black-anodized 30mm low ring/base combo that adds 20 MOA of reach and the rock-solid stability your rifle deserves.
The End
