Talley Scope Mount/Ring Combo — Black Anodized, 34mm Tube, Medium Rings, Remington 700/721/722/725/40X Long Action, 20 MOA (Model 840700LM | UPC 810301025431)
Give your long-action Remington build a precision optic interface that’s as rugged as your rifle. The Talley Scope Mount/Ring Combo (840700LM) is a CNC-machined, one-piece ring/base system with 34mm medium rings and a hard black anodized finish, engineered specifically for Remington 700/721/722/725/40X long actions. With an integral 20 MOA cant, this mount preserves internal elevation so you can dial farther, track cleaner, and hold zero through recoil and hard travel—without stacking separate bases and rings.
Why This Talley 34mm, 20 MOA Combo Stands Out
Integrated One-Piece Strength: Rings and base are machined together for superior alignment and rigidity—fewer parts, fewer variables, and no ring-to-base slop.
34mm Medium Rings: The modern scope standard for large turret travel and robust internals—medium height keeps your optic close to the bore for a better cheek weld (verify objective clearance).
20 MOA Elevation Cant: Adds built-in down-angle so your scope operates near its optical center while preserving more “up” for long-range dialing.
Black Anodized Durability: Hard, low-glare finish resists abrasion, corrosion, and weather, blending cleanly with matte receivers and barrels.
Remington Long-Action Footprint: Correct hole spacing and geometry for Rem 700/721/722/725/40X long actions—no adapters or guesswork.
Field Benefits You’ll Notice
Rock-Solid Zero: The unitized platform resists shift from recoil cycles and rough transport.
Cleaner Optic Setup: Integrated alignment typically reduces or eliminates lapping, speeds installation, and lowers the chance of tube stress.
More Reach at Distance: The 20 MOA base geometry gives you the dialing headroom modern cartridges need for mid-to-long-range work.
Balanced Ergonomics: Medium rings promote a consistent cheek weld for steadier prone, kneeling, and offhand shots.
Ideal Use Cases
Long-range hunting with high-travel 34mm scopes.
Precision target/steel where you’re routinely stretching past 600–1,000 yards.
Backcountry builds that demand light, rigid, and trustworthy hardware.
Fitment & Compatibility
Clearance Tip: Medium rings commonly accommodate 44–50 mm objectives on standard contours (often with low-profile caps). For tall flip caps, large 56 mm objectives, or heavy barrel contours, measure to confirm clearance.
Installation Best Practices
Safety First: Verify the rifle is unloaded; remove the bolt.
Prep Surfaces: Degrease receiver holes and screws. Lightly oil only where the manufacturer specifies.
Set the Base: Align the one-piece mount; hand-start all screws to avoid cross-threading.
Torque to Spec: Tighten base screws in sequence to Talley’s spec (commonly 15–25 in-lb).
Level & Eye Relief: With the rifle leveled, set eye relief at max magnification; plumb the reticle.
Cap Screws: Tighten ring caps in an X-pattern to your scope maker’s recommendation (often 15–18 in-lb for 34mm tubes).
Threadlocker: If recommended, use a removable (blue) threadlocker sparingly on clean threads.
Note: Over-torque can oval a scope tube and induce tracking errors. Use a calibrated inch-pound wrench.
What You’ll See on the Range
Repeatable tracking as the integrated design minimizes alignment error.
Consistent impact thanks to a rigid interface that holds zero across temperature swings.
Confidence dialing long with 20 MOA of built-in cant preserving precious elevation travel.
Specifications
Construction: CNC-machined, one-piece integrated ring/base
Material: Lightweight, rigid aluminum alloy
Tube Size: 34mm
Ring Height: Medium
Base Geometry: 20 MOA cant (long-range optimized)
Finish: Black Anodized (low glare)
Fit: Remington 700/721/722/725/40X — Long Action
Model #: 840700LM | UPC: 810301025431
Included: Integrated mount and mounting screws (per manufacturer package)
Care & Maintenance
Re-check torque after the first range session and after major temp swings.
Keep it clean: Wipe dust and solvent; avoid harsh abrasives on the anodized finish.
Inspect periodically: Confirm cap gap symmetry and that witness marks on screws haven’t moved.
Who It’s For
Hunters who want a light, rigid, do-it-once mounting solution.
Precision shooters running 34mm glass who need a true 20 MOA base.
Remington long-action owners seeking a clean, aligned mount that complements the rifle’s lines.
SEO-Friendly Keywords (Use Naturally on Your Product Page)
Talley 840700LM, Talley 34mm medium Remington 700 long action, 20 MOA one-piece scope mount, Talley ring/base combo black anodized, Remington 721 722 725 40X scope mount, 34mm Talley mount medium height, UPC 810301025431.
Upgrade your Remington long-action with the Talley 840700LM—a black-anodized, 20 MOA, one-piece 34mm medium ring/base combo that locks in zero, maximizes dialing range, and streamlines your entire optic setup.
The End
