Talley Scope Mount/Ring Combo — Smoked Bronze Cerakote, 1" Tube, High Rings, Fits Browning X-Bolt (Model SB950735 | UPC 810301025189)
Give your Browning X-Bolt a rock-solid optic foundation that also looks the part. The Talley Scope Mount/Ring Combo (SB950735) pairs high 1" rings with a precision one-piece ring/base design, finished in rugged Smoked Bronze Cerakote to complement earth-tone rifles and modern hunting builds. By integrating the base and rings into a single CNC-machined unit, Talley minimizes tolerance stack, improves alignment, and boosts long-term zero retention—exactly what backcountry hunters and accuracy-minded shooters demand.
Why Choose This Talley High 1" X-Bolt Mount
Integrated One-Piece Strength: Fewer components mean fewer failure points, superior alignment, and reduced need for lapping in most setups.
High 1" Rings: Extra clearance for larger objectives, tall flip-caps, and heavy barrel contours while maintaining a consistent cheek weld (verify measurements).
Smoked Bronze Cerakote: Durable, low-glare ceramic finish stands up to rain, dust, solvents, and field wear, and pairs cleanly with bronze or FDE stocks/actions.
X-Bolt Specific Fit: Screw spacing and footprint engineered for Browning X-Bolt receivers to deliver a clean, factory-correct interface.
Lightweight, Field Tough: Strong alloy construction keeps ounces off your rifle without sacrificing rigidity or repeatability.
Field Benefits You’ll Notice
Reliable Zero, Trip After Trip: The rigid, unitized platform resists shift from recoil, temperature swings, and hard miles in the truck or pack.
Better Ergonomics With Big Glass: High ring height helps clear 50 mm (and some 56 mm) objectives, sunshades, and caps—ideal for low-light hunting scopes.
Faster Setup: Integrated rings reduce alignment headaches; get leveled, torqued, and zeroed sooner.
Weather-Ready Finish: Cerakote shrugging off moisture and grime means less maintenance during long hunts.
Ideal Use Cases
Big-Objective Hunting Optics: 50–56 mm objectives on the X-Bolt, especially with flip-up caps or sunshades.
Heavy/Fluted Barrels: Extra clearance where low/medium rings are tight.
Backcountry & Western Hunts: Lightweight reliability for long hikes and variable conditions.
Range & Verification Days: Repeatable mounting interface for confirming dope and seasonal re-zero.
Fitment & Compatibility
Clearance Tip: High rings commonly clear 50 mm objectives (often with caps) on standard X-Bolt barrel contours; some 56 mm objectives may also clear depending on cap height and contour. Measure from your scope’s bell/cap to barrel to confirm.
Installation Best Practices
Safety First: Verify the rifle is unloaded.
Degrease & Prep: Clean receiver holes and screws; dry thoroughly.
Set the Mount: Place the one-piece unit, start all screws by hand to avoid cross-threading.
Torque in Sequence: Tighten base screws to Talley’s spec (commonly 15–25 in-lb). Install the scope, then snug ring-cap screws in an X-pattern to scope-manufacturer limits (often 15–18 in-lb for 1" tubes).
Level & Eye Relief: Level the rifle, set eye relief at max magnification, ensure reticle plumb, then final torque.
Threadlocker: Use a removable threadlocker (e.g., blue) sparingly on clean threads if desired.
Note: Over-torque can crush scope tubes. Use a calibrated inch-pound wrench and follow your scope maker’s guidelines.
Specifications
Brand: Talley
Product: Scope Mount/Ring Combo
Construction: CNC-machined one-piece integrated ring/base
Tube Size: 1"
Ring Height: High
Finish: Smoked Bronze Cerakote
Platform Fit: Browning X-Bolt
Model #: SB950735
UPC: 810301025189
Included: One-piece mount with integral high rings; mounting screws (per manufacturer package)
Care & Maintenance
Re-Check Torque: After your first range session and at seasonal temperature shifts.
Keep Clean: Wipe dirt/dust; avoid aggressive abrasives that can mar Cerakote.
Protect Hardware: Light rust inhibitor on exposed steel fasteners in wet climates.
Who It’s For
Hunters running big objectives who need reliable clearance and a consistent cheek weld.
Western & backcountry shooters seeking a lightweight mount that won’t quit.
X-Bolt owners who prefer the simplicity and alignment of an integrated ring/base with a premium, color-matched finish.
SEO-Friendly Keywords (Use Naturally on Your Product Page)
Talley SB950735, Talley Smoked Bronze Cerakote mount, 1 inch high rings X-Bolt, Browning X-Bolt scope mount ring combo, integrated ring base 1" high, bronze Cerakote scope mount, UPC 810301025189, high rings for 50mm scope X-Bolt, lightweight hunting optic mount.
Upgrade your Browning X-Bolt with the Talley SB950735—the Smoked Bronze, one-piece 1" high ring/base combo that locks in your zero, clears big objectives, and looks as good as it shoots.
The End
