Talley Scope Mount/Ring Combo — Smoked Bronze Cerakote, 30mm Tube, High Rings, Fits Browning X-Bolt (Model SB750735 | UPC 810301025219)
Run big glass with rock-solid confidence. The Talley Scope Mount/Ring Combo (SB750735) is a precision one-piece ring/base system for the Browning X-Bolt, pairing 30mm high rings with a durable Smoked Bronze Cerakote finish. By integrating the base and rings into a single CNC-machined alloy unit, Talley reduces tolerance stack, speeds installation, and delivers repeatable zero that stands up to hard recoil, tough weather, and miles in the truck or pack.
Why This Talley 30mm High Combo Stands Out
Integrated One-Piece Design: Rings and base are machined together for superior alignment, fewer fasteners, and excellent long-term stability—often no lapping required.
High 30mm Rings: Extra clearance for 50–56 mm objectives, flip-up caps, and sunshades, while maintaining a consistent cheek weld (verify your measurements).
Smoked Bronze Cerakote: Rugged, low-glare ceramic coating resists abrasion, chemicals, and corrosion, and complements bronze/FDE rifles perfectly.
Purpose-Built for X-Bolt: Footprint, screw spacing, and geometry match the Browning X-Bolt receiver for a clean, factory-correct fit.
Lightweight Strength: Field-proven alloy construction minimizes weight without compromising rigidity—ideal for mountain and backcountry hunts.
Field Benefits You’ll Notice
Reliable Zero Through Abuse: The rigid unitized platform shrugs off bumps, temperature shifts, and repeated recoil cycles.
Big-Objective Friendly: High ring height helps clear large bells and tall caps on heavy contour barrels, ensuring proper scope placement and eye relief.
Faster, Simpler Setup: Fewer parts mean less alignment guesswork—get leveled, torqued, and on paper quickly.
Weather-Ready Finish: Cerakote armor keeps your mount looking good and performing season after season.
Ideal Use Cases
Low-Light Hunting Scopes: 50–56 mm objectives for maximum exit pupil at dawn and dusk.
Backcountry & Western Hunts: Lightweight reliability for long hikes, variable weather, and rough travel.
Range Work & Verification: Repeatable mounting for confirming dope, dialing practice, and seasonal re-zero.
Fitment & Compatibility
Clearance Tip: High rings commonly clear 50 mm objectives (often with caps) and can work with some 56 mm objectives depending on cap height, barrel contour, and rail height. Measure from scope bell/cap to barrel to confirm.
Installation Best Practices
Safety First: Verify the rifle is unloaded.
Prep & Degrease: Clean receiver holes and screws; ensure threads are dry and oil-free.
Set the Mount: Place the one-piece unit; start all screws by hand to avoid cross-threading.
Torque to Spec: Tighten base screws in sequence to Talley’s spec (commonly 15–25 in-lb). Install the scope, then snug ring-cap screws in an X-pattern to your scope maker’s limits (often 15–18 in-lb for 30mm tubes).
Level & Eye Relief: Level the rifle, set eye relief at max magnification, plumb the reticle, then final-torque caps evenly.
Threadlocker: Use a small amount of removable (blue) threadlocker on clean threads if recommended.
Note: Over-torque can crush scope tubes. Always use a calibrated inch-pound wrench and follow your scope manufacturer’s guidance.
Specifications
Brand: Talley
Product: Scope Mount/Ring Combo
Construction: CNC-machined one-piece integrated ring/base
Tube Size: 30mm
Ring Height: High
Finish: Smoked Bronze Cerakote
Platform Fit: Browning X-Bolt
Model #: SB750735
UPC: 810301025219
Included: One-piece mount with integral rings; mounting screws (per manufacturer package)
Care & Maintenance
Re-check torque after first range trip and after major temperature swings.
Keep it clean: Wipe dust and debris; avoid harsh abrasives on Cerakote.
Protect hardware: A light rust inhibitor on exposed steel fasteners helps in wet climates.
Who It’s For
Hunters running big objectives who need reliable clearance without sacrificing ergonomics.
Backcountry shooters chasing ounces but demanding dependable zero retention.
X-Bolt owners who prefer the simplicity, alignment, and aesthetics of a color-matched, integrated mount.
SEO-Friendly Keywords (Use Naturally on Your Product Page)
Talley SB750735, Talley Smoked Bronze Cerakote 30mm, high rings X-Bolt mount, Browning X-Bolt scope mount ring combo, integrated ring base 30mm high, bronze Cerakote scope mount, UPC 810301025219, lightweight hunting scope mount, Talley X-Bolt 30mm rings high.
Outfit your Browning X-Bolt with the Talley SB750735—the Smoked Bronze, one-piece 30mm high ring/base combo that clears big glass, locks in your zero, and elevates your rifle’s look and performance.
The End
