Talley Scope Mount/Ring Combo Smoked Bronze Cerakote 30mm Tube Fits X-Bolt Low Rings SB730735

Talley Scope Mount/Ring Combo — Smoked Bronze Cerakote, 30mm Tube, Low Rings, Fits Browning X-Bolt (Model SB730735 | UPC 810301025196) Give your Browning X-Bolt a premium optic interface that looks as good as it shoots. The Talley Scope Mount/Ring Combo (SB730735) is a precision one-piece ring/base system with 30mm low rings and a rugged Smoked Bronze Cerakote finish that complements modern bronze/FDE hunting builds. By machining the base and rings together, Talley minimizes tolerance stack, streamlines installation, and delivers the rock-solid repeatability serious hunters and long-range shooters demand—without unnecessary weight. Why This Talley 30mm Low Combo Stands Out Integrated One-Piece Design: Rings and base are CNC-machined as a single unit for superior alignment, fewer fasteners, and excellent long-term stability—often no lapping required. 30mm Low Rings: Keeps your scope close to the bore for a natural cheek weld and faster target acquisition (always verify objective/cover clearance). Smoked Bronze Cerakote: Tough, low-glare ceramic coating resists abrasion, chemicals, and weather while pairing cleanly with today’s bronze and earth-tone rifles. Purpose-Built for X-Bolt: Footprint, screw spacing, and geometry are engineered specifically for Browning X-Bolt receivers for a factory-correct fit. Lightweight Strength: Rigid alloy construction holds zero under recoil yet trims ounces for backcountry hunts. Field Benefits You’ll Notice Reliable Zero: The unitized platform resists shift from recoil cycles, hard travel, and temperature swings. Improved Ergonomics: Low ring height supports a confident cheek weld and steadier prone or offhand holds. Faster Setup: Fewer parts and built-in alignment make leveling and torquing straightforward—get on paper and start confirming dope sooner. Weather-Ready Finish: Cerakote armor shrugs off rain, dust, and solvent splash for season-after-season durability. Ideal Use Cases Big-Game Hunting: Lightweight, dependable mounting for elk, deer, and pronghorn. Backcountry Builds: Save ounces without sacrificing rigidity or repeatability. Range & Verification: Repeatable interface for confirming drops, wind calls, and seasonal re-zero. Fitment & Compatibility Platform: Browning X-Bolt (verify your exact model/action length for screw pattern compatibility) Tube Diameter: 30mm Ring Height: Low Finish: Smoked Bronze Cerakote Model: SB730735 UPC: 810301025196 Clearance Tip: Low rings commonly fit many 40–44 mm objectives on standard X-Bolt barrel contours—even with low-profile caps. Tall flip-caps, 50 mm objectives, or heavy barrel profiles may need more clearance—measure before mounting. Installation Best Practices Safety First: Verify the rifle is unloaded. Prep & Degrease: Clean receiver holes and screws; dry thoroughly. Set the Mount: Place the one-piece unit; start all base screws by hand to avoid cross-threading. Torque in Sequence: Tighten base screws to Talley’s recommendation (commonly 15–25 in-lb). Level & Eye Relief: Level the rifle, set eye relief at max magnification, plumb the reticle. Cap Screws: Snug ring-cap screws in an X-pattern to your scope maker’s spec (often 15–18 in-lb for 30mm tubes). Threadlocker: Use a small amount of removable (blue) threadlocker on clean threads if recommended. Note: Over-torque can deform scope tubes. Use a calibrated inch-pound wrench and follow your scope manufacturer’s guidance. What You’ll Notice on the Range Consistent Impact: Stable, aligned connection that helps keep your zero put. Natural Sight Picture: Low mounting height supports a steady cheek weld and faster acquisition. Confidence at Distance: Integrated alignment reduces variables as you dial and confirm ballistic data. Specifications Brand: Talley Product: Scope Mount/Ring Combo Construction: CNC-machined one-piece integrated ring/base Tube Size: 30mm Ring Height: Low Finish: Smoked Bronze Cerakote Platform Fit: Browning X-Bolt Model #: SB730735 UPC: 810301025196 Included: One-piece mount with integral rings; mounting screws (per manufacturer package) Care & Maintenance Re-check torque after your first range session and following major temperature swings. Keep it clean: Wipe grit/dust; avoid harsh abrasives on Cerakote. Protect hardware: A light rust inhibitor on exposed steel fasteners helps in wet climates. Who It’s For Backcountry hunters who demand light weight and dependable zero retention. Precision-minded shooters running 30mm glass who prefer a clean, integrated solution. X-Bolt owners seeking a color-matched mount that elevates both performance and aesthetics. SEO-Friendly Keywords (Use Naturally on Your Product Page) Talley SB730735, Talley Smoked Bronze Cerakote 30mm, low rings X-Bolt mount, Browning X-Bolt scope mount ring combo, integrated ring base 30mm low, bronze Cerakote scope mount, UPC 810301025196, lightweight hunting scope mount, Talley X-Bolt 30mm rings low. Upgrade your Browning X-Bolt with the Talley SB730735—the Smoked Bronze, one-piece 30mm low ring/base combo that locks in your zero, streamlines setup, and complements your rifle’s finish. The End