Talley Scope Mount/Ring Combo — Smoked Bronze Cerakote, 34mm Tube, High Rings, Fits Browning X-Bolt (Model SB850735 | UPC 810301025240)
Run big, modern glass on your Browning X-Bolt with confidence. The Talley Scope Mount/Ring Combo (SB850735) is a precision one-piece ring/base system that pairs 34mm high rings with a rugged Smoked Bronze Cerakote finish. By integrating the base and rings into a single CNC-machined alloy unit, Talley minimizes tolerance stack, speeds installation, and delivers a stable, repeatable interface that holds zero through recoil, weather, and real-world travel.
Why This Talley 34mm High Combo Stands Out
One-Piece Strength & Alignment: Rings and base are machined together for superior bore-to-optic alignment, fewer fasteners, and excellent long-term stability—often no lapping required.
High 34mm Rings: Purpose-built clearance for large 50–56 mm objectives, tall flip caps, and sunshades while maintaining a consistent cheek weld (verify your measurements).
Smoked Bronze Cerakote: Tough, low-glare ceramic finish resists abrasion, chemicals, and corrosion, and pairs cleanly with bronze/FDE stocks and actions.
X-Bolt Specific Fit: Footprint, screw spacing, and geometry engineered precisely for Browning X-Bolt receivers for a clean, factory-correct fit.
Lightweight, Field-Tough: Strong alloy construction keeps ounces off your rifle without compromising rigidity—ideal for mountain and backcountry hunts.
Field Benefits You’ll Notice
Rock-Solid Zero: Unitized platform resists shift from recoil cycles, hot-to-cold swings, and the bumps of truck racks and pack rides.
Big-Objective Friendly: High ring height helps clear 56 mm bells, tall caps, and heavy barrel contours so you can position your scope for ideal eye relief.
Faster, Simpler Setup: Fewer parts mean less alignment guesswork—level, torque, and get on paper quickly.
Weather-Ready Durability: Cerakote armor shrugs off rain, dust, and solvent splash for season-after-season performance.
Ideal Use Cases
Low-Light Hunting Scopes: Big objectives for maximum exit pupil at dawn and dusk.
Backcountry & Western Hunts: Lightweight reliability for long hikes, variable terrain, and unpredictable weather.
Range Verification & Practice: Repeatable mounting for confirming dope, dialing practice, and seasonal re-zero.
Fitment & Compatibility
Clearance Tip: High rings commonly clear 50 mm objectives (often with caps) and can accommodate many 56 mm objectives depending on barrel contour, cap height, and sunshade length. Always measure from scope bell/cap to barrel to confirm.
Installation Best Practices
Safety First: Verify the rifle is unloaded and the workspace is clear.
Prep & Degrease: Clean receiver holes and screws; ensure threads are dry and oil-free.
Set the Mount: Place the Talley one-piece on the receiver; start all base screws by hand to avoid cross-threading.
Torque to Spec: Tighten base screws in sequence to Talley’s recommendation (commonly 15–25 in-lb). Install the scope, then snug ring-cap screws in an X-pattern to your scope maker’s spec (often 15–18 in-lb for 34mm tubes).
Level & Eye Relief: Level the rifle, set eye relief at max magnification, plumb the reticle, then final-torque caps evenly.
Threadlocker: Use a small amount of removable (blue) threadlocker on clean threads if recommended.
Note: Over-torque can deform scope tubes. Use a calibrated inch-pound wrench and follow your scope manufacturer’s guidance.
What You’ll Notice on the Range
Consistent Impact: A rigid, aligned interface that helps your zero stay put, shot after shot.
Natural Sight Picture: Proper height supports steady head position and comfortable eye relief with large-objective optics.
Confidence at Distance: Integrated alignment reduces variables as you dial and confirm ballistic data.
Specifications
Brand: Talley
Product: Scope Mount/Ring Combo
Construction: CNC-machined one-piece integrated ring/base
Tube Size: 34mm
Ring Height: High
Finish: Smoked Bronze Cerakote
Platform Fit: Browning X-Bolt
Model #: SB850735
UPC: 810301025240
Included: One-piece mount with integral rings; mounting screws (per manufacturer package)
Care & Maintenance
Re-check torque after the first range session and following major temperature swings.
Keep it clean: Wipe dust and grit; avoid aggressive abrasives on Cerakote finishes.
Protect hardware: A light rust inhibitor on exposed steel fasteners helps in wet climates.
Who It’s For
Hunters running big objectives who need dependable clearance and uncompromising zero retention.
Backcountry shooters chasing ounces while demanding durability.
X-Bolt owners who prefer the simplicity and alignment of a color-matched, integrated mount.
SEO-Friendly Keywords (Use Naturally on Your Product Page)
Talley SB850735, Talley Smoked Bronze Cerakote 34mm, high rings X-Bolt mount, Browning X-Bolt scope mount ring combo, integrated ring base 34mm high, bronze Cerakote scope mount, UPC 810301025240, lightweight hunting scope mount, Talley X-Bolt 34mm rings high.
Outfit your Browning X-Bolt with the Talley SB850735—the Smoked Bronze, one-piece 34mm high ring/base combo that clears big glass, locks in your zero, and elevates your rifle’s look and performance.
The End
