Talley Scope Mount/Ring Combo — Smoked Bronze Cerakote, 34mm Tube, Medium Rings, Fits Browning X-Bolt (Model SB840735 | UPC 810301025233)
Give your Browning X-Bolt a premium optic interface built for modern 34mm scopes. The Talley Scope Mount/Ring Combo (SB840735) is a precision, one-piece ring/base system featuring 34mm medium-height rings with a rugged Smoked Bronze Cerakote finish. Purpose-built for the X-Bolt footprint, this integrated mount reduces tolerance stack, speeds installation, and delivers the repeatable zero serious hunters and long-range shooters demand—without adding unnecessary weight.
Why This Talley 34mm Medium Combo Stands Out
One-Piece Strength & Alignment: Rings and base are CNC-machined together for superior alignment, fewer fasteners, and long-term stability—often no lapping required.
34mm Medium Rings: The sweet-spot height for many 44–56 mm objective scopes (verify your objective, cap height, and barrel contour) while keeping the optic close to the bore for a natural cheek weld.
Smoked Bronze Cerakote: Tough, low-glare ceramic coating that resists abrasion, chemicals, and weather—perfect with bronze/FDE rifle finishes.
Engineered for X-Bolt: Correct screw spacing and receiver geometry for a clean, factory-correct fit on Browning X-Bolt rifles.
Lightweight, Field-Tough Alloy: Holds zero through recoil and rough travel yet trims ounces for backcountry hunts.
Field Benefits You’ll Notice
Rock-Solid Zero: A rigid, unitized platform that shrugs off pack miles, truck racks, and temperature swings.
Ergonomic Sight Picture: Medium height supports a steady cheek weld and faster target acquisition than overly tall mounts.
Faster Setup: Integrated rings reduce alignment guesswork—level, torque, confirm eye relief, and hit the range.
Weather-Ready Finish: Cerakote armor stands up to rain, dust, and solvent splash for season-long durability.
Ideal Use Cases
Western big-game hunting where light weight and dependable zero are mandatory.
Precision hunting builds pairing compact, high-travel 34mm scopes with an X-Bolt.
Range verification for confirming drops, dialing practice, and seasonal re-zero.
Fitment & Compatibility
Clearance Tip: Medium rings commonly accommodate 44–50 mm objectives (often with low-profile caps) and can work with some 56 mm optics depending on barrel contour and cap height. Always measure from your scope bell/cap to the barrel to confirm clearance.
Installation Best Practices
Safety First: Verify the rifle is unloaded before mounting.
Prep & Degrease: Clean receiver holes and screws; ensure threads are dry and oil-free.
Set the Mount: Place the one-piece unit on the receiver and start all screws by hand to avoid cross-threading.
Torque in Sequence: Tighten base screws to Talley’s recommended values (commonly 15–25 in-lb). Install the scope, then snug ring-cap screws in an X-pattern to your scope maker’s spec (often 15–18 in-lb for 34mm tubes).
Level & Eye Relief: Level the rifle, set eye relief at max magnification, plumb the reticle, then final-torque caps evenly.
Threadlocker: Use a removable (blue) threadlocker very sparingly on clean threads if recommended.
Note: Over-torque can deform scope tubes. Use a calibrated inch-pound wrench and follow the scope manufacturer’s guidance.
What You’ll Notice on the Range
Consistent impact thanks to a stable, aligned interface that keeps your zero put.
Natural head position from the medium height for steadier prone, kneeling, or offhand shots.
Confidence at distance as the integrated design reduces mounting variables while you dial and confirm ballistic data.
Specifications
Brand: Talley
Product: Scope Mount/Ring Combo
Construction: CNC-machined one-piece integrated ring/base
Tube Size: 34mm
Ring Height: Medium
Finish: Smoked Bronze Cerakote
Platform Fit: Browning X-Bolt
Model #: SB840735
UPC: 810301025233
Included: One-piece mount with integral rings; mounting screws (per manufacturer package)
Care & Maintenance
Re-check torque after your first range trip and after major temperature changes.
Keep it clean: Wipe dust and grit; avoid aggressive abrasives on Cerakote.
Protect hardware: A light rust inhibitor on exposed steel fasteners helps in wet climates.
Who It’s For
Backcountry hunters seeking a color-matched, lightweight mount that won’t quit.
Precision-minded shooters running 34mm glass on X-Bolt platforms who prioritize alignment and repeatability.
Anyone wanting a clean, integrated look that complements bronze rifles while delivering pro-grade performance.
SEO-Friendly Keywords (Use Naturally on Your Product Page)
Talley SB840735, Talley Smoked Bronze Cerakote 34mm, medium rings X-Bolt mount, Browning X-Bolt scope mount ring combo, integrated ring base 34mm medium, bronze Cerakote scope mount, UPC 810301025233, lightweight hunting scope mount, Talley X-Bolt 34mm rings.
Upgrade your Browning X-Bolt with the Talley SB840735—the Smoked Bronze, one-piece 34mm medium ring/base combo that locks in your zero, streamlines setup, and looks as premium as it performs.
The End
