Talon Grips Adhesive Grip Compatible w/Glock 26/27/28/33/39 Gen4 w/Medium Backstrap, Black Textured Rubber 117R

The Talon Grips Adhesive Grip – Compatible with Glock 26/27/28/33/39 Gen4 w/Medium Backstrap, Black Textured Rubber, Model 117R (UPC: 812308026794) is a precision-cut, stick-on grip upgrade designed to give your subcompact Gen4 Glock a more secure, confidence-inspiring hold—without adding bulk or permanently altering your frame. With a thin black rubber texture, OEM-quality fit, and full wrap coverage, this grip helps improve control, comfort, and consistency for concealed carry, range work, and defensive shooting. GrabAGun+3Hinterland Outfitters+3Cheaper Than Dirt+3

If you run your Gen4 subcompact with the medium or medium beavertail backstrap, the Talon 117R is the exact model you’re looking for. TheGunZone+3Hinterland Outfitters+3alpinerange.com+3

Custom Fit for Gen4 Glock 26/27/28/33/39 with Medium Backstrap

This specific Talon Grip is laser cut to match the contours of: TheGunZone+3Hinterland Outfitters+3alpinerange.com+3

• Glock 26 Gen4 w/ medium backstrap

• Glock 27 Gen4 w/ medium backstrap

• Glock 28 Gen4 w/ medium backstrap

• Glock 33 Gen4 w/ medium backstrap

• Glock 39 Gen4 w/ medium backstrap

Important detail:

• The medium backstrap fit also works with the medium beavertail backstrap, so if you prefer the beavertail module, this grip still lines up perfectly. alpinerange.com+1

Because it’s custom-designed for these frames, you get:

• OEM-quality fit and finish that looks almost factory

• Precise cutouts that clear controls and a logo cutout for the Glock emblem on the left side of the grip TheGunZone+3Hinterland Outfitters+3alpinerange.com+3

• A wrap that hugs the frame with no weird overlap, gaps, or trimming required

Black Textured Rubber – Ideal for Concealed Carry

The 117R uses Talon’s popular black textured rubber surface. It’s designed to give a positive, non-slip grip while still being friendly to both your skin and your clothing. TheGunZone+4Hinterland Outfitters+4TALON Grips+4

Rubber texture advantages:

• Excellent traction in sweaty, wet, or cold hands

• Less likely to irritate skin or snag clothing compared to aggressive “sandpaper”/granulate textures

• Perfect for IWB concealed carry and all-day EDC

• Great for shooters with softer hands or who dislike abrasive grips TheGunZone+4Hinterland Outfitters+4TALON Grips+4

If you’ve tried granulate or skateboard tape and found it too harsh, the Talon rubber texture offers a more comfortable, carry-optimized solution.

Ultra-Thin, Low-Profile – Less Than 0.5mm Thick

Talon Grips are known for being extremely thin—less than 0.5mm thick. TheGunZone+3TALON Grips+3Cheaper Than Dirt+3

That means:

• Minimal added bulk – your Glock still fits existing holsters and feels like a Glock, not a brick

• Maintains the frame’s original ergonomics and trigger reach

• Offers a factory-like profile that doesn’t print more under clothing

You get a huge improvement in traction and feel without turning your compact carry gun into something oversized or awkward.

Full-Coverage Wrap – Side Panels, Backstrap & Finger Grooves

The 117R is a rear-wrap, full-coverage design that hits all the important contact points on your grip: TheGunZone+3Hinterland Outfitters+3alpinerange.com+3

• Side panels, including above the thumb rest

• Ample backstrap coverage, optimized for the medium backstrap module

• Two finger wraps that cover the finger grooves under the trigger guard

This gives you:

• Better purchase from every angle, especially during recoil

• Improved control during rapid strings of fire and one-handed shooting

• A more planted, confident feel, whether you’re using a traditional thumbs-forward grip or another preferred style

Talon notes that this grip sticks extremely well even on Glock’s rough textured frame (RTF), further locking in your grasp on the gun. alpinerange.com+1

Strong Adhesive – Won’t Shift, Removes Cleanly

The adhesive backing on Talon grips is designed to stay put once properly installed, but can still be removed later with little to no residue. TheGunZone+4Hinterland Outfitters+4TALON Grips+4

Key adhesive features:

• Pressure- and heat-activated – use a hair dryer or heat gun during installation for best results Hinterland Outfitters+2Cheaper Than Dirt+2

• Won’t move or shift during normal use or concealed carry

• Can be peeled off cleanly, returning your frame close to factory condition

Talon states you can expect 1–3+ years of service life from a grip with typical carry and range use. TALON Grips+2alpinerange.com+2

Easy DIY Installation in Minutes

Installing the Talon 117R grip is straightforward and requires no gunsmithing: TheGunZone+3Hinterland Outfitters+3Cheaper Than Dirt+3

1. Unload and clear your Glock, ensuring it’s safe.

2. Clean the grip surface thoroughly using the included alcohol cleaning pad to remove oils and residue.

3. Peel the backing and align the grip wrap with the frame, ensuring cutouts line up.

4. Press the grip firmly into place around all edges, finger grooves, and backstrap.

5. Use a hair dryer or heat gun to warm the grip and activate the adhesive, then press again for a secure bond.

Total install time is usually just a few minutes, and once installed, the grip becomes a seamless part of your everyday carry setup.

Made in the USA – Built for Real-World Use

Talon Grips are 100% made in the USA, with a focus on quality, precision cutting, and durability. TALON Grips+2alpinerange.com+2

Owners commonly report:

• Noticeably better control and comfort versus the bare polymer frame

• A premium, OEM-like appearance thanks to accurate cut lines and logo windows TheGunZone+2TheGunZone+2

• Long life even under daily carry, sweat, and frequent range use

For many Glock shooters, adding Talon Grips becomes a standard upgrade on every pistol they rely on.

Key Specs – Talon Grips 117R Black Textured Rubber

From manufacturer and major retailer listings: TheGunZone+5Hinterland Outfitters+5Cheaper Than Dirt+5

• Brand: Talon Grips

• Model: 117R

• Product Type: Adhesive grip wrap (rear wrap)

• Texture: Black textured rubber (carry-friendly)

• Thickness: Less than 0.5mm

• Fit: Glock 26/27/28/33/39 Gen4 with medium backstrap (including medium beavertail)

• Coverage: Side panels (including above thumb rest), backstrap, and two finger wraps under trigger guard

• Adhesive: Pressure & heat activated; will not move once installed; removable with minimal residue

• Includes: Grip wrap, installation instructions, and alcohol cleaning pad

• Color: Black

• UPC: 812308026794

• Country of Origin: Made in the USA

Why Choose Talon 117R for Your Gen4 Subcompact Glock?

Choose the Talon Grips 117R Adhesive Grip if you:

• Run a Gen4 Glock 26/27/28/33/39 with the medium or medium beavertail backstrap

• Want a non-permanent, affordable upgrade that feels like a professional stipple job without the risk

• Need a concealed carry-friendly rubber texture that won’t chew up your hands or clothing

• Prefer an ultra-thin, full-wrap design that truly improves control while staying holster-friendly

For defensive carry, off-duty use, or everyday range work, the Talon 117R makes your subcompact Glock easier to grip, faster to shoot, and more secure in the hand—exactly what you want from a serious EDC pistol.

SEO-Focused Summary

The Talon Grips Adhesive Grip Compatible w/Glock 26/27/28/33/39 Gen4 w/Medium Backstrap, Black Textured Rubber 117R (UPC 812308026794) is a custom-cut, ultra-thin rubber grip wrap designed specifically for Gen4 subcompact Glock frames equipped with the medium backstrap or medium beavertail. Featuring black textured rubber, OEM-quality fit, full coverage on side panels, backstrap, and finger grooves, and a heat-activated adhesive that installs in minutes and can be removed with little residue, this Made-in-USA Talon grip significantly enhances control, comfort, and confidence for concealed carry and range use without adding bulk or permanently modifying your firearm. TheGunZone+6Hinterland Outfitters+6TALON Grips+6

The End