The Talon Grips Adhesive Grip 116R – Black Textured Rubber, Compatible with Glock 26/27/28/33/39 Gen4 with No Backstrap (UPC: 812308026763) is a custom-fit, stick-on grip upgrade designed to give your subcompact Glock serious control without adding bulk. Featuring a thin, black rubber texture and a wraparound, full-coverage design, this Talon Grip dramatically improves traction, comfort, and confidence—especially for concealed carry and defensive shooting. DFC Arms+4Buds Gun Shop+4Cheaper Than Dirt+4
If your Gen4 Glock 26, 27, 28, 33, or 39 feels slick in sweaty, cold, or gloved hands, the Talon 116R is an easy, low-cost way to transform the feel of your pistol.
Custom Fit for Glock 26/27/28/33/39 Gen4 – No Backstrap
This specific model is precision cut for Gen4 Glock 26, 27, 28, 33, and 39 frames that are run with no backstrap installed. DFC Arms+4Buds Gun Shop+4Cheaper Than Dirt+4
Compatible models:
Glock 26 Gen4 (no backstrap)
Glock 27 Gen4 (no backstrap)
Glock 28 Gen4 (no backstrap)
Glock 33 Gen4 (no backstrap)
Glock 39 Gen4 (no backstrap)
Because it’s laser-cut specifically for these frames, you get OEM-like fit and finish, including:
Clean cutouts around controls
A logo cutout for the Glock emblem on the left side of the frame eBay+3Buds Gun Shop+3TLO Outdoors+3
Coverage that lines up exactly with the texture and contours of the grip
No trimming, stretching, or guesswork—just peel, position, heat, and press.
Black Textured Rubber – Concealed Carry-Friendly Grip
The black textured rubber surface is Talon’s most popular option for carry pistols. It’s engineered to give you a positive, non-slip grip without being abrasive on skin or clothing. TheGunZone+5Buds Gun Shop+5TALON Grips+5
Benefits of the rubber texture:
Enhanced grip in wet, sweaty, or cold conditions
Less likely to irritate skin when carried IWB than aggressive “sandpaper” textures
Won’t shred clothing or snag cover garments as easily
Ideal for EDC and concealed carry as well as range use
If you’ve tried skateboard tape or granulate grips and found them too harsh, the Talon rubber texture is a big upgrade in comfort while still offering a serious traction boost.
Ultra-Thin, Low-Profile Design – Less Than 0.5mm Thick
Unlike bulky sleeves that can change the feel of your gun, Talon Grips are extremely thin—less than 0.5mm thick. DFC Arms+3TALON Grips+3Cheaper Than Dirt+3
That means:
Minimal added bulk – your Glock still fits your holsters and your hand the same way
Maintains the pistol’s natural ergonomics, just with more traction
Gives you a factory-like profile that doesn’t print more under clothing
You get the advantages of an improved grip without turning your slim subcompact into a blocky brick.
Full-Coverage Wrap – Side Panels, Backstrap & Finger Grooves
The 116R isn’t just a couple of strips stuck to the sides. It’s a one-piece wrap that covers key contact areas of the grip: DFC Arms+3Buds Gun Shop+3TLO Outdoors+3
Side panels, including above the thumb rest
Ample backstrap coverage
Two finger wraps for the finger grooves under the trigger guard
This full-coverage layout helps:
Lock your hand into the gun from every angle
Improve recoil control and shot-to-shot consistency
Provide a more secure purchase for one-handed or support-hand-only shooting
Compared to generic sleeves that only grab part of the grip, Talon’s wraparound design truly transforms the way the gun feels and handles.
Reliable Adhesive – Secure Hold, Clean Removal
Talon uses a strong, pressure-activated adhesive that’s made to stay put once properly installed—but can still be removed later without ruining your frame. TheGunZone+4TALON Grips+4Cheaper Than Dirt+4
Install using the included cleaning pad and a hair dryer or heat gun to set the adhesive
Once installed, the grip will not move or shift during normal use
When it’s time to replace or remove, it comes off cleanly with little to no residue
You get long-term durability (Talon notes 1–3+ years of typical life) without permanently altering your Glock’s frame. TALON Grips+1
Easy DIY Installation in Minutes
You don’t need a gunsmith or special tools to install Talon Grips 116R. The process is simple:
Unload and clear your firearm.
Degrease the grip area with the included alcohol cleaning pad. Cheaper Than Dirt+1
Peel the backing and align the grip wrap on your frame.
Press firmly around all edges and contours.
Use a hair dryer or heat gun to warm the grip, then press again to fully set the adhesive. Cheaper Than Dirt+2TLO Outdoors+2
Total install time is usually just a few minutes, and you’re ready to carry.
Made in the USA – Proven Durability
Talon Grips are 100% made in the USA, using high-quality materials and precise cutting for each specific firearm model. TALON Grips+2Cheaper Than Dirt+2
Owners and reviewers consistently report:
Noticeable improvement in control and comfort
A sleek, low-profile appearance that looks almost factory
Long service life even with regular carry and range abuse TheGunZone+1
For many Glock owners, Talon becomes a “must-have” upgrade on every carry gun.
Key Specs – Talon Grips 116R Black Textured Rubber
From manufacturer and major retailers: TheGunZone+5Buds Gun Shop+5Cheaper Than Dirt+5
Brand: Talon Grips
Model: 116R
Product Type: Adhesive grip wrap / grip tape
Texture: Black textured rubber (carry-friendly)
Thickness: < 0.5 mm
Coverage: Side panels (including above thumb rest), backstrap, two finger wraps under trigger guard
Fit: Glock Gen4 26 / 27 / 28 / 33 / 39 with no backstrap installed
Adhesive: Pressure-activated, heat-assisted install, removable with minimal residue
UPC: 812308026763
Country of Origin: Made in the USA
Why Choose Talon Grips 116R for Your Gen4 Subcompact Glock?
Pick the Talon Grips Adhesive Grip 116R if you want:
A non-permanent, affordable grip upgrade that feels like a custom stipple job without the risk
A concealed carry-friendly rubber texture that won’t chew up your skin or clothes
A thin, full-wrap design that improves control without changing your gun’s profile
A grip made specifically for Glock 26/27/28/33/39 Gen4 with no backstrap, not a one-size-fits-all solution
For defensive carry, off-duty use, or EDC range work, this grip wrap makes your subcompact Glock easier to hang on to, faster to shoot, and more secure in the hand—precisely what you want from a serious carry pistol.
SEO-Focused Summary
The Talon Grips Adhesive Grip Compatible w/Glock 26/27/28/33/39 Gen4 w/No Backstrap, Black Textured Rubber, 116R (UPC 812308026763) is a custom-cut, ultra-thin rubber grip wrap that provides full side panel, backstrap, and finger groove coverage for Gen4 Glock subcompacts without a backstrap installed. Featuring a black textured rubber surface that’s ideal for concealed carry, a heat-activated adhesive that installs in minutes and stays in place, and Made-in-USA quality, Talon 116R grips significantly enhance control, comfort, and confidence without adding bulk or permanently altering your firearm. TheGunZone+5Buds Gun Shop+5Cheaper Than Dirt+5
The End
