TALON Grips – Adhesive Grip for Full-Size Glock® Gen 5 (Textured Black Rubber)
Model: EV01R • UPC: 812308025216
Upgrade your Glock’s ergonomics in minutes. The TALON Grips Adhesive Grip (Textured Black Rubber) for full-size Glock Gen 5 frames adds a secure, comfortable, and professional feel without permanent modification. The thin, precision-cut overlay wraps your factory frame to reduce slip, tame recoil, and maintain a consistent index—ideal for training days, everyday carry, and long match stages.
Why This TALON Grip Rocks
Comfortable, no-slip texture: The rubberized surface offers excellent traction with a soft feel that won’t abrade skin or clothing—perfect for concealed carry and duty use.
Precision fit for Gen 5 full-size frames: Exact cut lines trace the Glock Gen 5 grip geometry, including reliefs for backstrap contours and frame-internals—so it looks factory once installed.
Ultra-thin, zero bulk: Adds control without changing the grip circumference significantly, preserving your established reach to trigger and mag release.
DIY install in minutes: Peel, wrap, press—no gunsmithing. Heat-activate for maximum adhesion. Clean removal if you ever go back to stock.
Lasting durability: Sweat-, oil-, and solvent-resistant adhesive designed to stay put through range days and daily carry.
Compatibility (Full-Size Glock Gen 5)
Common fits include G17 Gen5, G34 Gen5, G45 (full-size frame), and G47 models, including many MOS variants.
Works with no backstrap and factory backstrap configurations (follow the included trim/fit instructions where applicable).
Not for Gen 1–4 or compact/subcompact frames; verify your generation and frame size before purchase.
Model/ID: EV01R • Color/Texture: Black Rubber (Textured) • UPC: 812308025216
What You’ll Feel on the First Grip
More consistent draw and presentation thanks to repeatable hand placement.
Improved recoil management without adding abrasive grit—great for high-round-count sessions.
Confidence in wet, cold, or sweaty conditions where polymer frames can get slick.
Key Features at a Glance
Material: Textured black rubber (not sandpaper-like)
Thickness: Ultra-thin profile—no printing, no extra bulk
Adhesive: Pressure/heat-activated, long-lasting, clean removal
Edges: Laser-cut, chamfered wrap lines for a factory-style finish
Install Time: ~10–15 minutes with basic prep and a hair dryer/heat gun
Maintenance: Wipe clean with mild soap and water; avoid harsh solvents on the adhesive edge
Installation (Step-by-Step)
Unload & clear your firearm. Confirm chamber, mag well, and breach are empty.
Degrease the grip surface with isopropyl alcohol; let dry fully.
Test fit the TALON grip to understand alignment points.
Peel & apply from the reference edge (usually the backstrap), keeping slight tension as you wrap.
Heat-set with a hair dryer/low heat gun and press firmly around checkering, grooves, and edges.
Final check after 24 hours of cure for best adhesion before hard use.
Everyday Carry Friendly
Clothing-safe: The rubber texture is gentle on cover garments and seat belts.
Holster compatible: Ultra-thin layer fits standard holsters and doesn’t interfere with magwells or flared frames (holster fit may vary by model).
Who It’s For
Concealed carriers who want grip security without abrasive grit.
Duty/defensive shooters working in varied environments.
Competitive shooters seeking consistent control through long strings.
New shooters who benefit from repeatable hand placement and better traction.
FAQs
Q: Will this make my grip too thick?
A: No—TALON’s rubber overlay is ultra-thin, adding control without noticeably increasing circumference.
Q: Can I remove it later?
A: Yes. Warm the material and peel slowly to remove; adhesive residue, if any, wipes away with alcohol.
Q: Is it rough like skateboard tape?
A: No. The rubber texture is grippy yet comfortable against skin and clothing.
Q: Will it fit with Glock backstraps installed?
A: Yes. Follow the included instructions for selecting the correct wrap pattern/trim for your backstrap configuration.
Q: Does it affect warranty or frame integrity?
A: It’s a non-permanent, surface-applied accessory. It does not require frame modification.
SEO Highlights (What Shoppers Search)
TALON Grips Adhesive Rubber Grip for Glock Gen 5 full-size
Textured black rubber grip wrap for G17/G34/G45/G47
EV01R Glock Gen 5 rubber grip overlay UPC 812308025216
Non-abrasive carry-friendly Glock grip enhancement
Peel-and-stick thin grip for improved control
Meta Title (SEO)
TALON Grips Rubber – Full-Size Glock Gen 5 (EV01R) | Textured Black Adhesive Grip | UPC 812308025216
Meta Description (SEO)
Control without the abrasion. TALON Grips Adhesive Grip for full-size Glock Gen 5 (EV01R) adds a thin, textured black rubber surface for superior traction and comfort. Easy DIY install; fits G17/G34/G45/G47 (verify model). UPC 812308025216.
Structured Data (JSON-LD)
Add traction, keep comfort, and lock in a confident grip—TALON’s EV01R rubberized overlay makes your full-size Glock Gen 5 feel glued to your hand, not your clothes.
The End