TALON Grips – Adhesive Grip for SIG Sauer P250/P320 Full-Size & M17/M18 (Textured Black Rubber)
Model: EV08R • UPC: 812308025292
Give your SIG a confident, carry-ready hold in minutes. The TALON Grips Adhesive Grip (Textured Black Rubber) for SIG Sauer P250 and P320 Full-Size, plus M17/M18 grip modules, adds secure traction, better recoil control, and a more repeatable firing grip—without bulk or permanent modification. Precision-cut for a clean OEM look, the ultra-thin rubber overlay is comfortable on skin and clothing, making it ideal for everyday carry, range days, training, and duty.
Fit Snapshot: Designed for SIG P250/P320 Full-Size grip modules and M17/M18 (verify your module size and backstrap/insert configuration before purchase).
Why This TALON Grip Belongs on Your SIG
Non-abrasive traction: The rubberized texture improves control without the sandpaper feel—gentle on hands, cover garments, and car seats.
Precision SIG fit: Laser-cut for full-size P250/P320 modules and military-pattern M17/M18, tracing contours for a factory finish once installed.
Ultra-thin profile: Adds control without noticeably increasing grip circumference, preserving your reach to the trigger and mag release.
DIY install in minutes: Peel, wrap, heat-set, and press—no gunsmithing. Clean removal if you ever return to stock.
Built to last: Sweat-, oil-, and solvent-resistant adhesive stays put through classes, quals, and daily carry.
Key Features at a Glance
Texture / Color: Textured Black Rubber (non-abrasive)
Profile: Ultra-thin overlay; minimal added bulk
Cut: Precision laser-cut with tidy edges for an OEM-style look
Adhesive: Pressure/heat-activated, long-term bond, clean removal
Install Time: ~10–15 minutes with basic prep and a hair dryer/heat gun
Model ID: EV08R • UPC: 812308025292
Compatibility
Fits: SIG Sauer P250/P320 Full-Size grip modules; M17/M18 (module-dependent).
Notes: SIG grip modules vary (Carry, Compact, X-Series, Wilson modules, etc.). Confirm your exact module size before ordering. Works with standard factory textures and common insert/backstrap options when installed per instructions.
Does not fit: Subcompact-only shells or non-matching module sizes.
What You’ll Notice Right Away
More consistent hand placement for faster, repeatable presentations.
Better recoil management and quicker follow-ups—especially with duty or defensive loads.
Carry comfort thanks to a clothing-safe surface that won’t abrade cover garments.
Step-by-Step Installation
Unload & clear the firearm; verify chamber and magwell are empty.
Degrease the grip module with isopropyl alcohol; let dry completely.
Test-fit the grip to identify alignment points at the backstrap and index points.
Peel & apply from the recommended reference edge, keeping light tension while wrapping.
Heat-set with a hair dryer/low heat gun; press firmly around stippling, grooves, and seams.
Allow adhesive to cure (ideally 24 hours) before high-intensity use.
Everyday Carry & Range Advantages
Concealment-friendly: Rubber texture won’t chew up clothes or seat belts.
Holster compatible: Ultra-thin design maintains fit with most holsters (verify with your setup).
All-weather confidence: Maintains traction in sweat, rain, or cold.
Who It’s For
Concealed carriers who want secure traction without gritty abrasion.
Duty/defensive shooters operating across variable environments.
Competitive & training shooters seeking repeatable grip indexing through long strings.
New SIG owners who want a quick, reversible upgrade for control.
Care & Maintenance
Wipe with mild soap and water; avoid harsh solvents on edges.
Periodically re-heat and press edges if needed after heavy use.
Replace after prolonged hard service to maintain optimal traction.
FAQs
Q: Will EV08R fit my P320 Carry or Compact?
A: EV08R is designed for Full-Size modules and M17/M18 patterns. For Carry/Compact shells, use the TALON model made for those sizes.
Q: Is the texture rough like skateboard tape?
A: No—this is non-abrasive rubber that’s grippy yet clothing-safe.
Q: Can I remove it later?
A: Yes. Warm the material and peel slowly; any residue wipes away with isopropyl alcohol.
Q: Does it change my grip size?
A: Only minimally. The overlay is ultra-thin, adding control without noticeably increasing circumference.
SEO Highlights (What Shoppers Search)
TALON Grips EV08R rubber adhesive grip for SIG P320/P250 Full-Size
M17/M18 textured black rubber grip overlay
Non-abrasive SIG grip wrap for EDC & duty
Ultra-thin peel-and-stick TALON gun grip
UPC 812308025292 TALON SIG full-size grip
Meta Title (SEO)
TALON Grips – SIG P320/P250 Full-Size & M17/M18 Rubber Adhesive Grip (EV08R) | Textured Black | UPC 812308025292
Meta Description (SEO)
Upgrade traction and comfort on your SIG P320/P250 Full-Size or M17/M18 with TALON Grips EV08R. Ultra-thin, non-abrasive textured black rubber adhesive wrap. Easy DIY install; clean removal. UPC 812308025292.
Structured Data (JSON-LD)
Lock in a confident, clothing-safe hold—TALON’s EV08R rubberized overlay makes your full-size SIG P320/P250 or M17/M18 feel secure, consistent, and ready for anything.
The End