TALON Grips – Adhesive Grip for Ruger LC9(s) / LC380 / EC9s (Textured Black Rubber)

Model: EV11R • UPC: 812308023311

Give your slim Ruger a confident, carry-ready hold—without adding bulk. The TALON Grips Adhesive Grip (Textured Black Rubber) for Ruger LC9(s), LC380, and EC9s adds secure traction, better recoil control, and repeatable hand placement in minutes. Precision laser-cut to hug the factory frame, this ultra-thin rubber overlay looks OEM-clean, feels great against skin and clothing, and stands up to daily concealed carry and long practice sessions.

Fit Snapshot: Designed for Ruger LC9(s), LC380, and EC9s single-stack models. Not for EC9 (non-s) or Max-9 / Security-9 / LCP series. Always verify your exact model before purchase.

Why This TALON Grip Belongs on Your Ruger

• Non-abrasive traction: The rubberized texture is grippy but clothing-safe—no “sandpaper” feel on skin, shirts, or car seats.

• Precision, model-specific cut: Matches the LC9(s)/LC380/EC9s frame lines for a factory-style finish and seamless look once installed.

• Ultra-thin profile: Improves control without noticeably increasing circumference, preserving reach to the trigger, magazine release, and safety.

• DIY install in minutes: Peel, wrap, heat-set, and press—no gunsmithing required. Clean removal if you ever return to stock.

• Built to last: Sweat-, oil-, and solvent-resistant adhesive holds through concealed carry, training, and weather changes.

Key Features at a Glance

• Texture / Color: Textured Black Rubber (non-abrasive, EDC friendly)

• Profile: Ultra-thin overlay; minimal added bulk

• Cut: Precision laser-cut with tidy, chamfered edges for an OEM look

• Adhesive: Pressure/heat-activated; long-term bond with clean removal

• Install Time: ~10–15 minutes with simple prep and a hair dryer/heat gun

• Model ID: EV11R • UPC: 812308023311

Compatibility

• Fits: Ruger LC9(s), LC380, and EC9s single-stack pistols.

• Does not fit: EC9 (non-s), Max-9, Security-9, LCP/LCP II/LCP MAX, or other Ruger models.

• Notes: Works with most OEM baseplates and pinky extensions; verify fit if using aftermarket magazine sleeves or wrap-around accessories.

What You’ll Notice Right Away

• More consistent draw and index thanks to tactile alignment points.

• Improved recoil control for steadier sights and quicker follow-up shots, especially on lightweight micro-frames.

• Carry comfort—smooth rubber surface won’t abrade cover garments during IWB or pocket carry.

Step-by-Step Installation

1. Unload & clear the firearm; physically and visually check chamber and magwell.

2. Degrease the grip area with isopropyl alcohol; allow to dry completely.

3. Test-fit the overlay to learn alignment around the backstrap and index pads.

4. Peel & apply from the recommended reference edge, keeping light tension as you wrap.

5. Heat-set gently with a hair dryer/low heat gun; press firmly into texturing, reliefs, and seams.

6. Allow adhesive to cure (ideally 24 hours) before hard use.

Everyday Carry & Range Advantages

• Concealment-friendly: Ultra-thin design preserves holster fit and pocket footprint.

• Holster compatible: Plays well with most pocket, IWB, and appendix rigs (verify your specific setup).

• All-weather confidence: Maintains traction in sweat, rain, or cold conditions.

Care & Maintenance

• Wipe with mild soap and water; avoid harsh solvents at the edges.

• If an edge lifts after heavy use, briefly re-heat and press to re-seat.

• Replace after prolonged service life to maintain peak traction.

FAQs

Q: Will EV11R fit my EC9 (non-s)?
A: No. EV11R is cut for EC9s, not the EC9. Confirm your slide/frame markings.

Q: Is the texture rough like skateboard tape?
A: No—this is non-abrasive rubber: grippy, comfortable, and clothing-safe.

Q: Will it make my slim grip too thick?
A: The overlay is ultra-thin, adding traction without noticeably increasing circumference.

Q: Can I remove it later?
A: Yes. Warm gently and peel; any residue wipes away with isopropyl alcohol.

SEO Highlights (What Shoppers Search)

• TALON Grips EV11R for Ruger LC9(s) / LC380 / EC9s

• Textured black rubber adhesive grip wrap for Ruger single-stack

• Ultra-thin, non-abrasive concealed carry grip enhancement

• Peel-and-stick gun grip for LC9s/EC9s comfort and control

• UPC 812308023311 TALON Ruger LC9(s)/LC380/EC9s rubber grip

Meta Title (SEO)

TALON Grips – Ruger LC9(s) / LC380 / EC9s Rubber Adhesive Grip (EV11R) | Textured Black | UPC 812308023311

Meta Description (SEO)

Boost control and comfort on your Ruger LC9(s), LC380, or EC9s with TALON Grips EV11R. Ultra-thin, non-abrasive textured black rubber adhesive wrap. Easy DIY install; clean removal. UPC 812308023311.

Structured Data (JSON-LD)

json
Copy code
{
  "@context": "https://schema.org",
  "@type": "Product",
  "name": "TALON Grips Adhesive Grip – Textured Black Rubber (Ruger LC9(s) / LC380 / EC9s)",
  "sku": "EV11R",
  "gtin12": "812308023311",
  "brand": { "@type": "Brand", "name": "TALON Grips" },
  "category": "SportingGoods",
  "description": "Ultra-thin, textured black rubber adhesive grip overlay for Ruger LC9(s), LC380, and EC9s. Adds traction and comfort without bulk. Easy, non-permanent installation.",
  "material": "Rubber overlay",
  "color": "Black",
  "additionalProperty": [
    { "@type": "PropertyValue", "name": "Compatibility", "value": "Ruger LC9(s), LC380, EC9s" },
    { "@type": "PropertyValue", "name": "Texture", "value": "Non-abrasive rubber" },
    { "@type": "PropertyValue", "name": "Installation", "value": "Adhesive, heat-set" }
  ],
  "itemCondition": "https://schema.org/NewCondition",
  "isAccessoryOrSparePartFor": {
    "@type": "Product",
    "name": "Ruger LC9(s) / LC380 / EC9s"
  }
}

Lock in a confident, clothing-safe hold—TALON’s EV11R rubberized overlay makes your LC9(s), LC380, or EC9s feel planted, controllable, and ready for everyday carry.

The End