TALON Grips – Adhesive Grip for SIG Sauer P365 / P365XL (Textured Black Rubber)

Model: EV12R • UPC: 812308023359

Turn your micro-compact into a confidence machine. The TALON Grips Adhesive Grip (Textured Black Rubber) for SIG P365 and P365XL adds secure traction, better recoil control, and repeatable hand placement—without bulky sleeves or permanent modifications. Precision laser-cut for an OEM-clean look, this ultra-thin rubber overlay feels comfortable against skin and clothing, making it perfect for everyday carry, training, and duty backup roles.

Fit Snapshot: Designed for SIG Sauer P365 and P365XL grip modules. Not designed for P365 X-Macro frames or non-standard aftermarket modules. If your pistol has a manual safety or aftermarket magwell/baseplates, verify compatibility before purchase.

Why This TALON Grip Belongs on Your P365/P365XL

• Non-abrasive traction: The rubberized texture boosts control without the “sandpaper” scratch—gentle on hands, cover garments, and car seats.

• Precision SIG fit: Laser-cut contours follow factory lines and indexing points for a tidy, “from-the-factory” appearance once installed.

• Ultra-thin profile: Improves grip without noticeably increasing circumference, preserving reach to the trigger, mag release, and controls on micro frames.

• DIY install in minutes: Peel, wrap, heat-set, and press—no gunsmithing. Removes cleanly if you ever return to stock.

• Built for real carry: Sweat-, oil-, and solvent-resistant adhesive stays put through hot days, range classes, and daily IWB carry.

Key Features at a Glance

• Texture / Color: Textured Black Rubber (non-abrasive, clothing-safe)

• Profile: Ultra-thin overlay; minimal added bulk

• Cut: Precision laser-cut with tidy edges for an OEM-style finish

• Adhesive: Pressure/heat-activated; long-term bond, clean removal

• Install Time: ~10–15 minutes with basic prep and a hair dryer/heat gun

• Model ID: EV12R • UPC: 812308023359

Compatibility

• Fits: SIG Sauer P365 and P365XL grip modules.

• Does not fit: P365 X-Macro grip frames (different dimensions) or other non-matching modules.

• Notes: Works with common factory baseplates and pinky extensions; verify fit if you’re running magwells, manual safety cutouts, or aftermarket grip shells (Wilson, Icarus, Mischief Machine, etc.).

What You’ll Notice Immediately

• More consistent draw and index thanks to tactile alignment points that “lock” your hand in place.

• Improved recoil control for steadier sights and quicker follow-up shots—especially with snappy defensive loads.

• IWB comfort—smooth, rubberized surface won’t abrade cover garments or skin.

Step-by-Step Installation

1. Unload & clear—physically and visually inspect chamber and magwell.

2. Degrease the grip area using isopropyl alcohol; let it dry completely.

3. Test-fit to identify alignment around the backstrap and index pads.

4. Peel & apply from the reference edge; keep light tension while wrapping.

5. Heat-set gently (hair dryer/low heat gun) and press firmly into checkering and along seams.

6. Allow adhesive to cure (ideally 24 hours) before high-intensity use.

Everyday Carry & Range Advantages

• Concealment-friendly: Ultra-thin design preserves holster fit and the P365’s famously small footprint.

• Holster compatible: Plays well with most IWB/AIWB/pocket rigs (verify with your exact holster).

• All-weather confidence: Maintains traction in sweat, rain, or cold.

Care & Maintenance

• Wipe with mild soap and water; avoid harsh solvents directly on edges.

• If an edge lifts after hard use, briefly re-heat and press to re-seat.

• Replace after prolonged service life to maintain peak traction.

FAQs

Q: Will EV12R fit the P365 X-Macro?
A: No. The X-Macro has a different grip size; use the model cut for that frame.

Q: Is the texture rough like skateboard tape?
A: No—this is non-abrasive rubber: grippy, comfortable, and clothing-safe.

Q: Does it make the grip thicker?
A: The overlay is ultra-thin, adding traction without noticeably increasing circumference.

Q: Can I remove it later?
A: Yes. Warm gently and peel; residue wipes away with isopropyl alcohol.

Q: What about manual-safety models?
A: Some safety-cut variants require a specific pattern. Confirm your module (safety or non-safety) before ordering.

SEO Highlights (What Shoppers Search)

• TALON Grips EV12R for SIG P365 / P365XL

• Textured black rubber adhesive grip wrap, ultra-thin, non-abrasive

• Concealed carry grip enhancement for P365

• Peel-and-stick gun grip for SIG Sauer micro-compact

• UPC 812308023359 TALON P365/P365XL rubber grip

Meta Title (SEO)

TALON Grips – SIG P365 & P365XL Rubber Adhesive Grip (EV12R) | Textured Black | UPC 812308023359

Meta Description (SEO)

Upgrade control and comfort on your SIG P365 or P365XL with TALON Grips EV12R. Ultra-thin, non-abrasive textured black rubber adhesive wrap. Easy DIY install; clean removal. UPC 812308023359.

Structured Data (JSON-LD)

json
Copy code
{
  "@context": "https://schema.org",
  "@type": "Product",
  "name": "TALON Grips Adhesive Grip – Textured Black Rubber (SIG P365 / P365XL)",
  "sku": "EV12R",
  "gtin12": "812308023359",
  "brand": { "@type": "Brand", "name": "TALON Grips" },
  "category": "SportingGoods",
  "description": "Ultra-thin, textured black rubber adhesive grip overlay for SIG Sauer P365 and P365XL. Adds traction and comfort without bulk. Easy, non-permanent installation.",
  "material": "Rubber overlay",
  "color": "Black",
  "additionalProperty": [
    { "@type": "PropertyValue", "name": "Compatibility", "value": "SIG P365 and P365XL (not X-Macro)" },
    { "@type": "PropertyValue", "name": "Texture", "value": "Non-abrasive rubber" },
    { "@type": "PropertyValue", "name": "Installation", "value": "Adhesive, heat-set" }
  ],
  "itemCondition": "https://schema.org/NewCondition",
  "isAccessoryOrSparePartFor": {
    "@type": "Product",
    "name": "SIG Sauer P365 / P365XL"
  }
}

Lock in a confident, clothing-safe hold—TALON’s EV12R rubberized overlay makes your SIG P365 or P365XL feel planted, controllable, and ready for anything.

The End