TALON Grips – Adhesive Grip for Springfield XD-S (9mm / .45) – Textured Black Rubber

Model: EV09R • UPC: 812308023236

Get a confident, carry-ready hold on your Springfield single-stack. The TALON Grips Adhesive Grip (Textured Black Rubber) for Springfield XD-S (9mm and .45 ACP) adds secure traction, better recoil control, and repeatable hand placement—without bulk or permanent modification. Precision-cut for the XD-S frame, this ultra-thin rubber overlay looks clean and OEM, feels comfortable against skin and clothing, and stands up to sweat, range sessions, and day-in/day-out carry.

Fit Snapshot: Designed specifically for Springfield XD-S (9mm / .45 ACP) single-stack models. Not for XD, XD-M, XD-E, or double-stack variants. Always verify your model before purchase.

Why This TALON Grip Belongs on Your XD-S

• Non-abrasive traction: The rubberized texture improves control and grip retention without the sandpaper feel—gentle on hands, cover garments, and car seats.

• Precision XD-S cut: Laser-cut wrap follows the XD-S frame contours, palm swell, and index points for a tidy, factory-style finish once installed.

• Ultra-thin profile: Adds control without noticeably increasing circumference, preserving reach to the trigger and magazine release.

• DIY install in minutes: Peel, wrap, heat-set, press—no gunsmithing required. Clean removal if you ever return to stock.

• Built to last: Sweat-, oil-, and solvent-resistant adhesive stays put through training classes, quals, and daily carry.

Key Features at a Glance

• Texture / Color: Textured Black Rubber (non-abrasive)

• Profile: Ultra-thin overlay; minimal added bulk

• Cut: Precision laser-cut edges for a clean, OEM-style look

• Adhesive: Pressure/heat-activated; long-term bond, clean removal

• Install Time: ~10–15 minutes with basic prep and a hair dryer/heat gun

• Model ID: EV09R • UPC: 812308023236

Compatibility

• Fits: Springfield XD-S 9mm and .45 ACP single-stack models (including common barrel/slide lengths).

• Does not fit: XD, XD-M, XD-E, XD-S Mod.2 with substantially different frame textures (verify), or double-stack frames.

• Backstraps/frames: Works with factory frame textures; follow included guidance if your pistol has optional inserts.

What You’ll Notice Right Away

• More consistent hand placement for faster, confident presentations.

• Better recoil management for steadier sights and quicker follow-ups.

• Clothing-safe comfort—no snaggy grit on cover garments or inside-the-waistband carry.

Step-by-Step Installation

1. Unload & clear the firearm; verify chamber and magwell are empty.

2. Degrease the grip surface with isopropyl alcohol; let dry completely.

3. Test-fit the grip to identify alignment points at the backstrap and index pads.

4. Peel & apply from the recommended reference edge, keeping light tension while wrapping.

5. Heat-set with a hair dryer/low heat gun; press firmly around checkering, reliefs, and seams.

6. Allow adhesive to cure (ideally 24 hours) before hard use.

Everyday Carry & Range Advantages

• Concealment-friendly: Rubber texture won’t chew up clothes or seat belts.

• Holster-compatible: Ultra-thin design maintains fit with most holsters (verify with your rig).

• All-weather confidence: Maintains traction in sweat, rain, or cold—ideal for duty, EDC, and practice.

Care & Maintenance

• Wipe with mild soap and water; avoid harsh solvents at the edges.

• If edges lift after heavy wear, briefly re-heat and press.

• Replace after prolonged hard service to maintain peak traction.

FAQs

Q: Will EV09R fit the XD-S in both 9mm and .45 ACP?
A: Yes—EV09R is cut for XD-S 9mm and .45 single-stack frames. Confirm your exact model before ordering.

Q: Is the texture rough like skateboard tape?
A: No. This is non-abrasive rubber that’s grippy yet comfortable against skin and clothing.

Q: Can I remove it later?
A: Yes. Warm the overlay and peel slowly; any residue wipes away with isopropyl alcohol.

Q: Will this make my grip too thick?
A: The overlay is ultra-thin, adding traction without noticeably increasing circumference.

SEO Highlights (What Shoppers Search)

• TALON Grips EV09R for Springfield XD-S 9mm / .45

• Textured black rubber adhesive grip wrap for XD-S

• Ultra-thin, non-abrasive XD-S grip enhancement

• Peel-and-stick gun grip for single-stack Springfield

• UPC 812308023236 TALON XD-S rubber grip

Meta Title (SEO)

TALON Grips – Springfield XD-S (9mm/.45) Rubber Adhesive Grip (EV09R) | Textured Black | UPC 812308023236

Meta Description (SEO)

Upgrade traction and comfort on your Springfield XD-S 9mm or .45 with TALON Grips EV09R. Ultra-thin, non-abrasive textured black rubber adhesive wrap. Easy DIY install; clean removal. UPC 812308023236.

Structured Data (JSON-LD)

json
Copy code
{
  "@context": "https://schema.org",
  "@type": "Product",
  "name": "TALON Grips Adhesive Grip – Textured Black Rubber (Springfield XD-S 9/45)",
  "sku": "EV09R",
  "gtin12": "812308023236",
  "brand": { "@type": "Brand", "name": "TALON Grips" },
  "category": "SportingGoods",
  "description": "Ultra-thin, textured black rubber adhesive grip overlay for Springfield XD-S 9mm and .45 ACP single-stack pistols. Adds traction and comfort without bulk. Easy, non-permanent installation.",
  "material": "Rubber overlay",
  "color": "Black",
  "additionalProperty": [
    { "@type": "PropertyValue", "name": "Compatibility", "value": "Springfield XD-S 9mm & .45 ACP single-stack" },
    { "@type": "PropertyValue", "name": "Texture", "value": "Non-abrasive rubber" },
    { "@type": "PropertyValue", "name": "Installation", "value": "Adhesive, heat-set" }
  ],
  "itemCondition": "https://schema.org/NewCondition",
  "isAccessoryOrSparePartFor": {
    "@type": "Product",
    "name": "Springfield XD-S (9mm / .45 ACP)"
  }
}

Lock in a confident, clothing-safe hold—TALON’s EV09R rubberized overlay makes your Springfield XD-S feel planted, controllable, and ready for anything.

The End