The Talon Grips Adhesive Grip Textured Black Rubber for Springfield XD-S 9, 40, 45 with Small Backstrap – Model 207R (UPC: 812308020808) is a precision-cut, wrap-around grip enhancement designed to dramatically improve how your Springfield XD-S feels and performs in your hand. Tailored specifically for XD-S pistols in 9mm, .40 S&W, and .45 ACP with the small backstrap installed, this Talon Grip delivers better traction, better recoil control, and better consistency—all in an ultra-thin, comfortable package that won’t chew up your skin or clothing.
If your XD-S feels slick or hard to hang onto—especially under sweat, stress, or rapid fire—the Talon Grips 207R Textured Black Rubber is one of the simplest, most effective upgrades you can make.
Precision Fit for Springfield XD-S 9mm / .40 / .45 with Small Backstrap
This grip is laser cut for an exact fit on:
Key fit features:
Rear-wrap design that hugs the frame from the backstrap around to the front strap
Full side panel coverage, including the area around the thumb rest
Cut specifically to follow the contours and indexing points of the XD-S grip
A clean, factory-like look once installed—no awkward overhangs or trimming needed
This is not a generic grip tape strip—it’s a firearm-specific, OEM-style wrap made just for the XD-S.
Textured Black Rubber – Concealed Carry Comfort with Serious Traction
The textured black rubber used on the 207R is Talon’s most popular material for concealed carry and everyday use:
Provides a tacky, non-slip surface that dramatically improves control during recoil
Non-abrasive, so it’s comfortable against bare skin in IWB or appendix carry
Won’t destroy cover garments or irritate your waistline the way aggressive “sandpaper” grips can
This makes the 207R ideal for:
Daily concealed carry with the XD-S as your EDC
Users who want more control but still prioritize comfort
Shooters with sensitive hands or those who dislike harsh granulate textures
You get a strong, confident hold without sacrificing the comfort you need for all-day wear.
Ultra-Thin, Low-Profile Grip – No Added Bulk
Talon Grips are known for being extremely thin—typically less than 0.5mm thick—so they enhance grip without changing the dimensions of your pistol:
Keeps the XD-S slim and concealable, exactly as intended
Maintains the factory ergonomics and natural point of aim
Does not interfere with holsters, mag release, slide stop, or other controls
Instead of stretching a bulky rubber sleeve over your gun, you’re applying a precision-fit skin that feels like it came from the factory that way.
Strong Adhesive – Secure Hold, Yet Fully Removable
The Talon Grips 207R uses a high-quality, pressure-sensitive adhesive designed specifically for firearms:
Will not move or shift once properly installed
Adheres securely even with sweaty hands, daily carry, and regular range sessions
Can be removed cleanly later, usually with little to no residue
That means you can:
Replace the grip after years of use when it finally wears out
Swap to a different texture (rubber, granulate, or PRO) if your needs change
Return your XD-S to factory condition for resale with no permanent modifications
You get all the security of a semi-permanent grip upgrade without the commitment or risk of stippling or frame work.
360° Coverage Where It Matters
The 207R rear-wrap design is carefully laid out to improve control exactly where you need it:
Side panels: Full coverage along both sides and around the thumb rest gives a more positive purchase for strong-hand and support-hand grips.
Backstrap: Textured rubber across the backstrap helps keep the gun anchored in your palm during recoil, especially important with lightweight .45 ACP and .40 S&W variants.
Under the trigger guard: Material in this area lets your support hand lock in and push up/back against recoil, improving muzzle control and shot-to-shot speed.
These enhanced contact points translate into:
A more consistent firing grip
Less shifting or twisting in the hand under recoil
Faster, more accurate follow-up shots in both training and defensive scenarios
Easy, Do-It-Yourself Installation
You don’t need a gunsmith to install Talon Grips. The 207R goes on in just a few minutes:
Unload and clear your XD-S.
Clean and degrease the grip area thoroughly using rubbing alcohol or an included wipe.
Peel the backing and align the grip wrap according to the instructions.
Gently wrap the grip around the frame, pressing firmly into all contours.
Use a hair dryer or heat gun to lightly warm the grip and activate the adhesive, then press again to secure.
Once it cools and sets, the grip feels like an integral part of the frame—no slipping, no shifting, just dependable traction.
Durable, Everyday-Ready Construction
Talon’s rubber material and adhesive are built to withstand:
Heat, sweat, and body oils from regular concealed carry
Frequent draw practice and range time
Standard cleaning routines (just avoid soaking it with aggressive aerosol CLP directly on the grip)
With proper installation and normal use, many carriers get 1–3+ years of service from a single Talon Grip before considering replacement.
Perfect Upgrade for a Slim Defensive Pistol
The Springfield XD-S is designed as a thin, easily concealable defensive pistol. The Talon 207R grip complements that mission by:
Making the gun easier to control with defensive loads, especially in .40 or .45
Helping maintain a consistent grip under stress, sweat, or adverse conditions
Improving confidence and accuracy without undermining concealment
If you actually carry and train with your XD-S, the improved feel and control from this grip upgrade will be immediately noticeable.
100% Made in the USA
Like all Talon Grips, the 207R is:
Designed, cut, and produced in the USA
Built to a high standard for law enforcement, military, competitive shooters, and serious civilian carriers
You’re not just buying generic tape—you’re installing a US-patented, firearm-specific grip solution trusted by professionals and enthusiasts alike.
Key Specs – Talon Grips 207R for Springfield XD-S
Brand: Talon Grips
Model: 207R – Adhesive Grip, Textured Black Rubber
UPC: 812308020808
Firearm Fit:
Material: Textured black rubber (non-abrasive, high-traction)
Design:
Rear-wrap, firearm-specific cut
Full side panel coverage, including thumb rest area
Backstrap and under-trigger-guard coverage for 360° control
Thickness: Ultra-thin (typically < 0.5mm)
Type: Adhesive grip (stick-on, heat-assisted application)
Country of Manufacture: USA
SEO-Focused Summary
The Talon Grips Adhesive Grip Textured Black Rubber for Springfield XD-S 9,40,45 with Small Backstrap 207R 812308020808 is a custom-fit, ultra-thin grip wrap designed to enhance traction, recoil control, and comfort on Springfield XD-S pistols in 9mm, .40 S&W, and .45 ACP. Featuring non-abrasive textured black rubber, full side and backstrap coverage, and a durable yet removable adhesive, this Talon Grip is perfect for concealed carry, home defense, and serious range use, giving your slim XD-S a secure, confident, and consistent grip without adding bulk or permanently altering the frame.
The End
