Trijicon Bolt-Action Scope Mount/Ring Combo – 30 mm Tube – Picatinny Rail – Matte Black Aluminum – AC22058 – UPC 719307618886

Build a precision rifle that stays zeroed through recoil, weather, and travel. The Trijicon Bolt-Action Scope Mount/Ring Combo (AC22058) provides a rigid, one-piece foundation for 30 mm optics on MIL-STD-1913 Picatinny rails. Precision-machined from aircraft-grade aluminum and finished in a matte black anodize, this mount delivers true ring alignment, secure clamping, and repeatable performance—so your scope tracks cleanly and your point of impact remains consistent from the bench to the backcountry. Model AC22058 | UPC 719307618886.

Why a one-piece Trijicon mount? Matched rings and a monolithic base minimize tube stress, improve return-to-zero confidence, and simplify installation compared to separate bases and rings.

Key Benefits

• Rock-solid zero retention: Wide rail contact and robust cross-bolt geometry resist shear and shift on hard-recoiling calibers.

• True 30 mm alignment: Precisely matched rings help prevent scope tube distortion, preserving optical clarity and turret tracking accuracy.

• Lightweight strength: Aluminum construction trims ounces while delivering the rigidity long-range shooters demand.

• Low-glare durability: Matte black anodized finish reduces reflections and stands up to corrosion, abrasion, and harsh weather.

• Direct Picatinny interface: Mounts straight to 1913 Picatinny rails found on modern actions and chassis—no adapters required.

Ideal Use Cases

• Backcountry hunting rifles: Dependable, weather-proof hold for premium 30 mm hunting optics when first-round hits matter.

• PRS/NRL & steel matches: Stable tracking and repeatable torque settings to exploit your scope’s dialing precision.

• LE/military marksman builds: Duty-grade reliability with predictable return to zero after transport and maintenance.

• Custom chassis projects: Clean, modern aesthetics that complement today’s stocks, rails, and Cerakote finishes.

Feature Highlights

• Tube Diameter: 30 mm (fits scopes with 30 mm main tubes)

• Rail Interface: MIL-STD-1913 Picatinny

• Construction: Precision-machined aluminum body with steel hardware

• Finish: Matte black anodized, low glare

• Design: One-piece bolt-action scope mount/ring combo for optimal alignment and rigidity

• Model / SKU: AC22058

• UPC: 719307618886

Height-over-rail and footprint are optimized for common bolt-gun setups. Verify bolt-handle clearance, barrel contour, and objective-bell spacing on your specific rifle.

On-Rifle Advantages You’ll Notice

• Consistent tracking: A square, stable base ensures elevation/windage adjustments translate cleanly to the target.

• Natural eye relief: Proper geometry supports a repeatable cheek weld in prone, kneeling, and bench positions.

• Fewer “mystery shifts”: Correct torque and secure clamping reduce zero wander after temperature swings or rough travel.

Compatibility Notes

• Rifles: Bolt actions and chassis systems equipped with Picatinny top rails.

• Scopes: 30 mm tube optics from Trijicon and other leading manufacturers (confirm objective diameter, eye relief needs, and ring spacing).

• Not for: Dovetail or Weaver-only rails without a Picatinny adapter.

Installation (Quick Start)

1. Unload & clear the rifle.

2. Prep surfaces: Degrease rail slots, mount base, and all screws.

3. Seat the base: Place the mount on the rail, push forward against the recoil slot, and torque base hardware evenly to manufacturer spec.

4. Set the optic: At maximum magnification, establish eye relief, level the reticle, and torque ring caps in an X-pattern to your scope maker’s spec.

5. Verify & mark: Confirm zero at the range; apply witness marks to screws for quick visual checks.

Pro tip: Use a calibrated torque wrench and quality thread prep; correct torque protects the scope tube and ensures repeatable zero.

Care & Maintenance

• Torque checks: Re-confirm after the first range session and whenever major temperature or altitude changes occur.

• Finish care: Wipe with a soft cloth; avoid harsh abrasives on anodized surfaces.

• Travel ready: Inspect witness marks and ring torque after flights or rough road miles.

Safety & Responsibility

• Respect torque limits: Over-tightening ring caps can deform tubes; under-tightening risks shift under recoil.

• Check clearances: Verify bolt throw, ocular/eyepiece, and objective bell clear the handle and barrel.

• Follow the four rules: Safe handling applies on the bench and in the field.

Specifications (At-a-Glance)

• Brand: Trijicon

• Product: Bolt-Action Scope Mount/Ring Combo

• Tube Size: 30 mm

• Interface: Picatinny (MIL-STD-1913)

• Material: Aluminum body, steel hardware

• Finish: Matte Black

• Model/SKU: AC22058

• UPC: 719307618886

Why Choose Trijicon AC22058?

• Match-grade alignment for 30 mm optics

• Rigid, lightweight one-piece design

• Return-to-zero confidence for hunting and competition rifles

SEO Highlights (Quick Scan)

• Trijicon 30 mm bolt-action scope mount/ring combo

• Picatinny rail, matte black aluminum, precision machining

• AC22058, UPC 719307618886, long-range rifle mounting solution

Suggested Meta Title

Trijicon Bolt-Action Scope Mount/Ring Combo – 30 mm, Picatinny, Matte Black Aluminum | AC22058 | UPC 719307618886

Suggested Meta Description

Secure your 30 mm optic with the Trijicon AC22058 one-piece mount. Picatinny interface, matte black aluminum, precision alignment, and rock-solid zero for hunting and match rifles. Model AC22058, UPC 719307618886.

The End