Trijicon Bolt-Action Scope Mount/Ring Combo – 34 mm Tube – Picatinny Rail – Matte Black Aluminum – AC22057 – UPC 719307618879

Build a rifle that holds zero when it matters. The Trijicon Bolt-Action Scope Mount/Ring Combo (AC22057) provides a rigid, precision-machined foundation for premium 34 mm optics on MIL-STD-1913 Picatinny rails. Crafted from lightweight, duty-ready aluminum with a matte black anodized finish, this one-piece mount/ring solution is engineered for alignment, repeatability, and real-world durability—so your turret tracking and point of impact stay consistent from the truck to the mountain or the match line. Model AC22057 | UPC 719307618879.

Why choose a one-piece Trijicon mount? You get matched rings, a true and square footprint, and robust rail engagement—minimizing scope stress and maximizing return-to-zero confidence across harsh conditions.

Key Benefits

• Rugged zero retention: Broad rail engagement and precision cross-bolt geometry help resist recoil shift on magnum and medium-bore bolt guns.

• True tube alignment: Matched 34 mm rings minimize scope stress for sharper image quality and consistent turret tracking.

• Lightweight strength: Aluminum body balances mountain-rifle ounces with the rigidity demanded by long-range shooting.

• Low-glare durability: Matte black anodizing cuts glare and resists corrosion, abrasion, and weather.

• Direct Picatinny interface: Mounts cleanly to 1913 Picatinny rails found on modern actions, chassis systems, and precision bases—no adapters required.

Ideal Use Cases

• Backcountry precision hunting: Secure, weatherproof interface for high-end optics where first-round hits count.

• PRS/NRL & steel matches: Stable tracking and repeatable torque settings to exploit your scope’s dialing accuracy.

• LE/military marksman rifles: Duty-grade reliability with predictable return to zero after transport or maintenance.

• Custom chassis builds: Clean aesthetics that pair with modern stocks, barrels, and cerakote finishes.

Feature Highlights

• Tube Diameter: 34 mm (fits scopes with 34 mm main tubes)

• Rail Interface: MIL-STD-1913 Picatinny

• Construction: Precision-machined aluminum with steel hardware

• Finish: Matte black anodized

• Design: One-piece bolt-action mount/ring combo for optimal alignment and rigidity

• Model / SKU: AC22057

• UPC: 719307618879

Height-over-rail and footprint are engineered for common bolt-action setups. Always verify bolt handle clearance, barrel contour clearance, and objective bell spacing on your specific rifle.

What You’ll Notice on the Rifle

• Consistent tracking: With a square, stable base, your scope’s elevation and windage adjustments translate cleanly to impacts.

• Easy, repeatable eye relief: The mount’s geometry helps establish a comfortable, repeatable cheek weld in prone, kneeling, or bench positions.

• Fewer “mystery shifts”: Robust clamping and correct torque reduce zero wander after travel and temperature swings.

Compatibility Notes

• Rifles: Bolt actions and chassis systems equipped with Picatinny top rails.

• Scopes: 34 mm tube optics from Trijicon and other premium manufacturers (verify objective size and eye relief needs).

• Not for: Dovetail or Weaver-only rails without a Picatinny adapter.

Installation (Quick Start)

1. Unload & clear your rifle.

2. Prep surfaces: Degrease rail slots, base, and screws.

3. Seat the mount: Position on the rail, push forward against the recoil slot, and tighten base hardware evenly to the manufacturer’s torque spec.

4. Set the optic: At max magnification, set eye relief, level the reticle, and torque ring caps in an X-pattern to the scope maker’s recommended value.

5. Verify & mark: Confirm zero at the range and add witness marks to screws for quick visual checks.

Pro tip: Use a calibrated torque wrench and quality thread prep—proper torque is critical for both tube integrity and repeatable zero.

Care & Maintenance

• Torque checks: Re-verify after the first range session and whenever major temperature or altitude changes occur.

• Finish care: Wipe down with a soft cloth; avoid harsh abrasives on the anodized surface.

• Travel ready: Inspect witness marks and re-check ring screws after flights or rough road trips.

Safety & Responsibility

• Respect torque limits: Over-tightening ring caps can deform scope tubes; under-tightening invites shift under recoil.

• Clearance matters: Confirm bolt throw and objective bell clearance before firing.

• Follow the four rules: Safe handling always applies—on the bench and in the field.

Specifications (At-a-Glance)

• Brand: Trijicon

• Product: Bolt-Action Scope Mount/Ring Combo

• Tube Size: 34 mm

• Interface: Picatinny (MIL-STD-1913)

• Material: Aluminum (steel hardware)

• Finish: Matte Black

• Model/SKU: AC22057

• UPC: 719307618879

Why Trijicon AC22057?

• Match-grade alignment for 34 mm optics

• Light yet rigid one-piece design

• Return-to-zero confidence for hunting and competition

SEO Highlights (Quick Scan)

• Trijicon 34 mm bolt-action scope mount/ring combo

• Picatinny rail, matte black aluminum, precision machining

• AC22057, UPC 719307618879, long-range rifle mounting solution

Suggested Meta Title

Trijicon Bolt-Action Scope Mount/Ring Combo – 34 mm, Picatinny, Matte Black Aluminum | AC22057 | UPC 719307618879

Suggested Meta Description

Secure your 34 mm optic with the Trijicon AC22057 mount/ring combo. One-piece aluminum design, Picatinny interface, matte black finish, and rock-solid zero for precision rifles. Model AC22057, UPC 719307618879.

The End